similar to: motherboard to use with CentOS 3

I am using an ASUS P4P800 Deluxe which is a motherboard that has been tested with Asterisk. I am unsure about the PCI slot and IRQ settings in the BIOS and am having problems with a WCFXO card sharing with other devices. Any suggestions on the settings required for Asterisk to avoid IRQ conflicts? Thanks :) -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is there a redhat or contrib RPM for tripwire? I looked and didn't find one, but may not have been looking in the right place. Zebee

I have an urgent (isn't it always the way!) need to set up webmail for one of our users. I intalled Squirrelmail, added /etc/httpd/conf.d/php.conf and etc/httpd/conf.d/php.conf/squirrel.conf to my webserver config (which is not RH stock) and ran the squirrelmail conf.pl I know nothing at all about php, so am having a hell of a time diagnosing the errors, and the squirrelmail.org site knows

Hi everybody, I failed to make Samba 3.0.0 /3.0.2a working from Windows side on the slightly different Slackware?s. Last try was the ?current? Slackware version(kernel 2.4.25) of some March 20?s with Samba 3.0.2a in it. Server: Asus P4P800-PIV?RAM 1.5(1)Gb- 3Com 3C940 integrated. Client(s): W2k SP3, Realtek 8139 NIC. Installed OK (binaries from a distribution?), user added OK after

I'm looking at deploying a new set of servers based around Intel P4 800MHZ FSB processors. Currently I'm looking at the following 2 motherboards and I'm wondering how well supported they are under -STABLE (specificaly the ATA and LAN as well as text mode video) Model Chipset ASUS P4P8X Intel 865P ASUS P4P800 Intel 865PE Also I'm looking for recommendations on Dual Xeon

Hello Hamish. I found your message just googling for Suse and sk98lin. Did you solve your problem? I had the same case and only way to restore was to change NIS driver speed settings from AUTO to 10Mb. And it was not related to OS as the same problem is in WXP ( I have dual boot, ASUS P4P800, integrated GB NIS ). Oleg.

Hello all, I tried sending this message to freebsd-config and freebsd-install, after subscribing to them, but no one answered back... so I am posting my question here. I just downloaded ISO images for 4.8-RELEASE, and prepared them for installation on an brand new ASUS P4P800-based computer. More information about this motherboard and integrated peripherals list, can be found here:

Hi, I would like to boot a LINUX system from an external USB Hard Drive. Motherboard (ASUS P4P800) supports boot from USB with or without floppy emulation. Is it possible to use syslinux for booting without any floppy or CD, just from the external USB drive? Regards... Bela

Thanks Mark will try that out! -----Original Message----- From: MF Hulber [mailto:asterisk-admin@hulber.com] Sent: 22 March 2005 05:25 To: Reuben Grech Subject: [info] [Asterisk-Users] :: BIOS Motherboard Settings :: I have the same motherboard. I put the card in the 2nd slot from the bottom. In this slot, if you look at the manual, it will possibly be in conflict with some USB channels. I

Hey all, I just pushed out the inaugural release of TentSteak 0.1.0, a set of Camping/Markaby helpers to minimize the busywork in your views (or was that the "viewwork in your busies"?). It includes lotsa HTML form and table helpers, plus a little bootstrapper to make it easy to load in shared helper modules of your own. Please check it out and let me know what you think.

Hi, I have a 1 port T1 card in an asus p4p800-vm board with a 2.0g Celeron, and 512m of 266mhz ram (256 on each channel). This board has video, Ethernet, and serial ata all on-board, I got it because of that, there wouldn't be anything else on the pci bus that would mess with the zaptel card(s). So, here's my problem. I'm running redhat 9 with kernel 2.4.20-20.9. I can load the

Dear List, This is my second post since I did not receive any answers the first time. I have P4P800-VM motherboard with serial ata controlers (ICH5) and serial ata discs. I managed to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150

For about a week a biug stack of updates have been pending for CENTOS but I can't install them. The yum update command leads to dependency resolution in the usual way but it always ends in this: ---> Package poppler-utils.i386 0:0.5.4-4.4.el5_4.11 set to be updated ---> Package xorg-x11-drv-qxl.i386 0:0.0.12-1.2.el5 set to be updated --> Running transaction check -->

Hi all, hopefully someone in the list will be able to advise me on what to do with a problem that's bugging me. I have a number of machines that simply have problems understanding "localboot 0". My configuration is such that after the machines happily remotely install via PXE+kickstart the "default" file on the PXE server will resort to telling the client to boot from

Sorry - just repeat the previous one... just adding that there were no network errors in ifconfig output. Hi everybody, I failed to make Samba 3.0.0 /3.0.2a working from Windows side on the slightly different Slackware?s. Last try was the ?current? Slackware version(kernel 2.4.25) of some March 20?s with Samba 3.0.2a in it. Server: Asus P4P800-PIV?RAM 1.5(1)Gb- 3Com 3C940

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

I've gone through about 5 computers and two linux distros (wbel and fc3) trying to get a system that doesn't show symptoms of frame slips, can receive faxes, and doesn't show CPU spikes with the tdm400p active. Unfortunately I haven't had much luck. I asked Digium whether there was a recommended hardware platform, and the best they could come up with was a Dell 600SC - but they

Okay, the jist of this whole thing, I get this infamous (?) problem, I have been trying to search though the archives of samba-general on gmane and also in my archive of this list. I have only seen requests for the magical answer. Environment: W2K/W2K3 mixed ADS going Native ADS only soon. Samba 3.0.4 compiled from source on a RHEL AS30 machine. MIT Kerberos v1.3.4 also compiled from source.

Hello all, As the subject states, I have a 3Com 3c940 Ethernet card to a 1 gb network switch. The switch detects it, but it only shows that it is giving me 100 mb/sec throughput. That card is rated for 1 GB...is there a way to force it to try to use 1 GB/sec? System-config-network isn't helping me here. Thanks for any help!

We are having echo problems with 1 in 6 calls on our Asterisk system. It's a one sided echo, users hear their own voice delayed about half a second and slightly attuneated. Without the echo canceller in Asterisk enabled echo problems occur on 1 in 3 calls and is much worse. We have a trouble ticket open with SBC and have thus far failed to find a cause (they do not believe that it is