similar to: What is the best Dell Machine for Asterisk?

Anyone knows if the SC430, based on the Intel E7230 chipset, is compatible with the Digium cards? I've tried the compatibility page on digium's website. It seems like they've pulled the old compatibility list, now the links on the page only point back to the product pages. Over here, Dell is selling (for a short period of time), SC430 with Pentium D 820 Dual Core Processor 2.8GHz,

Hi, I have a Dell Poweredge SC420 and a SC430. The SC420 has an ICH6 chipset and works ok with Xen. The SC430 has an ICH7 chipset and the SATA detection fails. I''ve tried 2.6.11.10 and 2.6.12.5 kernels, with Xen 2.0.7, Xen-testing and Xen-unstable, all with the same results. I''m using the same hypervisor and kernel binaries, so problems with the compiler environment etc. have

Dear gurus, Three DELL SC430s were purchased by my company a few months back and I've been told that when they spoke with the DELL representatives, they were informed that these servers were fully RHEL 4.0 compatible. Specs of the servers:- - Pentium 4 - 2.8 GHz - 1 GB RAM - 2x 250GB SATA HDDs I tried installing CentOS 4.0 on it but it doesn't seem to be able to detect any hard

I have and asterisk server that has been up and running for sometime and the voicemail quit working as when you go to voicemail you can't hear the greeting. But you get the message vm-theperson is playing. Thank you, Eddy Woodward Hayes Computer Systems 1355 Thomaswood Drive Tallahassee, Florida 32308 Email: ewoodward@hcs.net Phone: 850/297-0551 Ext. 129 Cell: 850/556-4064 Fax:

Does anyone know if a TDM2400 will fit into a Dell 2850? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com <http://www.techdatapros.com/> http://www.techdatapros.com -------------- next part -------------- An HTML attachment was scrubbed...

Hey everyone, I've been doing a lot of research into a decent server for Asterisk but I seem to be running and circles and now I am turning to you. The issue I have is it needs to be rack mountable (so a Dell SC430 isn't going to work) and preferably have 3 pci ports. The problem that I seem to be running into is that when I look at servers from Dell or IBM or the like they only seem to

Is anyone running Xen on this hardware? Is it stable? -- # CONFIG_TCG_TPM is not set Adam Kosmin GNU/Linux SA Visual Trading Systems, LLC Empire State Building 350 Fifth Avenue, Suite 6420 New York, NY 10118, USA Email akosmin@vtsystems.com Phone 1 (212) 871-1747 ext. 340 _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Thanks Tomas, I confirm the R Under development (unstable) (2018-04-26 r74651) version works for Rscript when the file name has a space, and no arguments are specified. C:\>"C:\Program Files\R\R-devel\bin\x64\Rscript.exe" "C:\foo bar.R" R Under development (unstable) (2018-04-26 r74651) Platform: x86_64-w64-mingw32/x64 (64-bit) Running under: Windows 7 x64 (build 7601)

Hello List, I know this has been brought up many times but I wanted to know if anyone had any expirience in the following. I setting up several voice mail systems. Each one is going to have a TDM400P. Two FXO for people to leave messages and two FXS for POTS phones so people can listen. Anyone know if there are any simple specific dell models that will handle this without a problem ? Thanks.

Hi Tomas, Thanks for the info about the binary builds; I did install it, however the bug still seems to be there in the current build. The workaround you suggested does work: C:\>"C:\Program Files\R\R-devel\bin\x64\Rscript.exe" "C:\foo bar.R" Fatal error: cannot open file 'C:\foo': No such file or directory C:\>"C:\Program

Hello all I tried to enable PCI Passthrough in my Debian Squeeze installation. Unfortunately, it didnt work. The following bug showed up (excerpt from dmesg): [ 10.148612] uhci_hcd 0000:00:14.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 4.678352] Failed to setup GSI :11, err_code:-22 [ 4.678480] dmfe 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low)

Hi, Every time I dial into my asterisk box i hear nothing but asterisk jittering. The following is an example of what I get on the asterisk CLI Thanks *CLI> DEBUG[81926]: File chan_sip.c, Line 3826 (check_user): Setting NAT on RTP to 0 DEBUG[81926]: File chan_sip.c, Line 4807 (handle_request): Check for res DEBUG[81926]: File chan_sip.c, Line 952 (find_user): Call from user

Hi all, I have installed centos 5.1 x86_64. 2.6.18-53.1.14.el5 Everything seems to be working fine except that the rtc module is not working. cat /proc/interrupts shows: CPU0 CPU1 0: 129 0 XT-PIC-XT timer 1: 330797 0 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 3: 4 0

Howdy. I just posted an unofficial HOWTO on configuring icecast2 on a Linux or other UNIX machine. It's just a draft in DocBook format, but I was hoping it might help someone. I've worked enough with icecast over the past few years that I thought it time to share what I've learned. The URL is as follows: http://quasi.ksl.com/icecast/ I have older documentation in

Hi I have come across a problem, with my tdp410 and soekris board (basically pc on a chip amd geode cpu). I am using the box as a firewall/asterisk box. The problem occurs when I drop ppp and I get dead loop dectiotn going, I seem to lose interrupts and get lots of messages in syslog from wctdm24xx saying missed interrupt increasing latency its out lined here

Excuse my ignorance here, but I am desperately trying to isolate the IRQ for my TE110P card (shown below as t1xxp) Ive gone into my bios and disabled all usb , parallel, serial and some other devices, those that I needed to keep, I have moved off of IRQ 10 and onto IRQ 5, but everytime I boot up, I get usb-uhci and ehci_hcd using IRQ 10 as well as my Digium card. Does anybody know what these are

I know, I know, check the archives but I can't find an answer since the new cards are well, NEW! I understand the whole issue of expandability and flexibility of using a T1 card and an Adtran 750. FXO or FXS, you mix and match. With the new card offerings from Digium I can easily put a 4CO by 8 Station system together. Barring the extra interrupts, extra CPU Cycles of extra interfaces, is

Hello. I have a MinITX motherboard with only one pci slot and one onboard ethernet interface, I have a TDM04B card plugged into that motherboard and the /proc/interrupts: CPU0 0: 169626332 XT-PIC timer 1: 1270 XT-PIC i8042 2: 0 XT-PIC cascade 8: 4 XT-PIC rtc 12: 170166219 XT-PIC eth0, wctdm 14:

Hello I am using a Junghanns QuadBRI ISDN card - the module name is qozap. If I like at my interrupt assignment, qozap is sharing interrupt 10 with libata and uhci_hcd. I think libata is the IDE hard drive module and uhci_hcd is a USB module. linux:~ # modprobe qozap linux:~ # cat /proc/interrupts CPU0 0: 12634579 XT-PIC timer 1: 10 XT-PIC i8042

Absolutely!! That was one thing that I was missing and would have like to have included. You can either send me the data or let us know the link. If you wouldn't mind adding to this HOWTO and I will post a link to your page so that people would know where I got the original files. Sounds good. KJ <p>On Wed, 2003-02-12 at 10:37, adam wrote: > looks great! :-) > > if you like i