similar to: Voicemail -> new feature request

Hi, I configured cdr_mysql (addons 1.0.9) to write the cdr records to the mysql db. The problem is that no records are written to the db. Why? I can import the csv-file to the db. so i assume the db is setup correct. Is there any chance to get debug from cdr_mysql to find his problem? This is my cdr_mysql.conf file: [global] hostname=localhost dbname=cdr password=passw0rd user=root ;port=3306

Hi, at the moment we have in Avaya Integral PBX with german pri (30 lines). We want to smouthly migrate to an Asterisk server. For this reason: Is it possible to route the external german pri (E1) through Asterisk server to that Avaya PBX? I think at first we need a Digium e1 card 4-Port. But how do we have to configure the routing of the whole PRI? I really would appreciate any sample

Hi, i am testing stuff for a couple of days now with Asterisk CVS-v1-0-07 and everything worked fine sofar when suddenly the voicemail and musiconhold sound output stopped working. The voicemailmenu still works though. I can see the voiceprompts etc in the debug messages on the asterisk CLI but i cant hear anything. Everything else works fine though. I can call out fine etc. I did some network

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

i am working on asterisk. i am using fedora core 2 on my asterisk mechine. when i was working on stable version my voicemailmenu was working well. i can lissten to menu and send dtmf to control menu now i have compiled CVS version of asterisk. now when i configure my voicemail for any extension suppose i declared a voicemail box 9999 for user 3000. when i dial to 3000 i cannot have any menu there

Hi, when i use the *8 for the call pickup the call i fetch is directly connected and i can't see the callers number. What i want is that the call in the first only rings at my phone and in the second i can see the callers number before i am connected. I am using a polycom 500 ip phone. Is this a special polycom problem? Regards, Kib

Hi, we successfull managed to bridge a PSTN (E1) switch over the TE405P card to our old PBX. So now we could migrate to the * server. But, there are two things we can't live with: 1. A call from the outside to the old PBX is missing a leading 0 before the number. Ex: caller has number 0123456 -> * routes to old pbx -> old pbx sees 123456 as caller number. 2. A call made from a SIP

Hi, i am running * 1.0.9 with a newer version of the TE405P. Modprobe wct4xxp and ztcfg are OK. zap show channels only shows me the following. my zapata.conf: [pstn] switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown usecallingpres=yes busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley could be produce hangups callwaitingcallerid=yes ; show

Hi, i need an recommandation for an ATA adapter to use with an anlog fax maschine. I would appreciate any hints. Regards!

Hi, the following from extension.conf does not work correctly: exten => 301, 1, Dial(SIP/455&SIP/456, 15) That is the console output: -- Executing Dial("mISDN/1/105", "SIP/455&SIP/456&SIP/456| 10") in new stack -- Called 455 -- Called 456 -- SIP/455-46a8 is ringing == Spawn extension (incoming, 301, 1) exited non-zero on

Hi; One of our OSTs filled up. Once we realized this, we executed lctl --device 9 deactivate on our fs''s combo MDS/MGS machine. We saw in the syslog that the OST in question was deactivated: Lustre: setting import ufhpc-OST0008_UUID INACTIVE by administrator request However, ''lfs df'' on the clients does not show that the OST is deactivated there, unless we *also*

I was always annoyed that you couldn't terminate an action with dbus so I have written this patch which fixes that. Hopefully this can be included. I wrote the patch trying to repeat as little code as possible so I just added a boolean parameter to the dbusHandleActivateMessage and changed the name to dbusHandleActivateDeactivateMessage. You could probably change the deactivate parameter

Hi, the option c for the announce of the user count does not work me in * 1.0.9. exten => 9999,1,Wait(1) exten => 9999,2,MeetMe(|Mdcs) And how to handel the marked mode with option A? I can't find any sample config for this. Regards

Hi, I've installed * 1.2.1 with latest bristuff patches (0.3.0-PRE-1f). When I activate music-on-hold on a SIP-to-SIP connection, the music sounds like in a fast-forward play mode. On the *-console I can see much lines like this: -- Silence suppression is disabled (option_silence_suppression=0 chan->timingfd=18) What's going on? With bristuff 0.3.0-PRE-1d everything works fine (but

i am using dovecot-2.2.36-3.el7_7.1.x86_64 on centos 7 is it possible to activate / deactivate a sieve script for a mailbox from the command line? my mailboxes are currently stores in /../vmail/domain.tld/username if i activate / deactivate a filter set using roundcube (webmail system) then it creates or deletes a symbolic link /../vmail/domain.tld/username/dovecot.sieve? which points to a

Hi! First of all, Im posting from Austria. Alle respondes of my server are translated to german, and if my question ist not in good english please forgive me. :-) Were runnig an asterisk und searching for a way to fix a question from one of our clients. After calling the number and no response of our client the voice-box gives response. Thats ok... but after the voice-box, which ist self-

I wasn't sure what to call this in the subject line, but here's my issue. I have an occasional need to switch a few computers from one Internet provider to a different one. Both Internet providers feed into the same network, one at 192.168.0.1 and the other at 192.168.0.254. So to change from one provider to the other I run nmtui to change the gateway and dns server addresses, then

Hi, I''m just learning Ruby on Rails and ran into something where I know I''m either doing something very stupid or I''m missing something. My model as a boolean attribute called active_flag. In my Sql Server database this is stored as a bit value. I then setup a method in my controller called "deactivate". This is very simple, it does: def deactivate

On 12 Eki 2012, at 20:00, Jim Grosbach wrote: > > On Oct 12, 2012, at 7:07 AM, Baris Aktemur <baris.aktemur at ozyegin.edu.tr> wrote: > >> Dear Tim, >> >>> >>> The JIT sounds like it does almost exactly what you want. LLVM's JIT >>> isn't a classical lightweight, dynamic one like you'd see for >>> JavaScript or Java.

1. Create a separate class that has your highlight/unhighlight behavior in it, and extend just the element you want to highlight with that class... like this (also allows you to easily apply this behavior elsewhere when you need it in the future): Object.extend(this.el, HighlightBehaviorClass.prototype) 2. When defining your event handlers, assign them to variables so you have a