similar to: Broadvoice Outages?

I have been trying to make Broadvoice match incoming Caller ID and do specific things based on the number received, but due to Broadvoice requiring the "s" to start off an incoming extension, I cannot get this to work. Has anyone been able to do this? Here are some examples of my setup: from sip.conf: context=broadvoice-incoming from extensions.conf [broadvoice-incoming] exten =>

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

Connecting to proxy.dca.broadvoice.com Calls all of a sudden cannot be completed. Cannot ping proxy.dca.broadvoice.com Changed to proxy.chi.broadvoice.com pingable, but now get the following: Got SIP response 500 "Internal Server Error" back from 147.135.12.128internal error Called Tech Support... get dead air then carrier busy signal. Anyone else having

Is the Broadvoice service up? I just signed up with them and started receiving calls in no time but could not make calls. And after a few minutes I cannot even place calls. register => [number]:[password]@sip.broadvoice.com [broadvoice] type=peer fromuser=[number] host=proxy.lax.broadvoice.com fromdomain=sip.broadvoice.com context=from-broadvoice dtmfmode=inband any help would be

I'm getting a couple strange things with asterisk on Broadvoice. It works fine currently for inbound and outbound. Everything is registered, its perfect. My problems currently are: 1) After 20 minutes audio out to broadvoice goes away 2) After about 3 hours my registration attempts to broadvoice time out and the only solution is to switch to a different proxy which subsequently works.

Hi all, I am trying to configure my Asterisk PBX to connect to a broadvoice account. I want incoming calls to go to the "s" extension and to ultimately have outbound calls routed through my broadvoice account(s). I cannot for the life of me get this to register correctly. I am currently receiving this message on the console: Failed to authenticate on Register to

Hello All, I have 4 Broadvoice lines. If I call any of the lines it shows that is coming from the first line. exaple register=XXXXXXXXX1@sip.broadvoice.com:passwd:XXXXXXXXX1@sip.broadvoice.com register=XXXXXXXXX2@sip.broadvoice.com:passwd:XXXXXXXXX2@sip.broadvoice.com register=XXXXXXXXX3@sip.broadvoice.com:passwd:XXXXXXXXX3@sip.broadvoice.com

I had my asterisk configuration working very well with broadvoice, but it stopped working this afternoon. I plugged the Cisco 7960 phone I used for my origional signup (just a few days before they offered generic BYOD) and it works fine. I did notice it seems to do all of its comunication through proxy.broadvoice.com (I used tcpdump). I have never contacted broadvoice about using asterisk

My SIP seems to be configured correctly as I can dial out and my minutes show up on my broadvoice bill, but whenever anyone calls my broadvoice # inbound they just get a busy signal. I dont get anything in the logs saying anything came in from broadvoice at all. Has anyone had this/simmilar problem with inbound from Broadvoice? Any suggestions? Thanks Neri -------------- next part

I currently have my astcc databases card lenghts at 7 digits long. I would like to expand this to 10 digits now though. Will I screw things up if I leave the old 7 digit long pins in there and start using/generating 10 digit pins? Thanks

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Dear all, I have tried a lot of things to make broadvoice work with asterisk , but I failed each time. Please suggest a good service providers that I can use with asterisk for outbound and inbound calls. -- With regards, Vicky Shrestha System Director WorldLink Communications Jawalakhel , Kathmandu, Nepal

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

Has anyone been watching and logging when broadvoice becomes unstable? Is it only peak hours, or is it random? If its somewhat consistant, I'd like to enforce some time of day routing in my dialplan. Otherwise I may just close the account altogether. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone know what happens if you try to have 5 concurrent outgoing channels with VoicePulse Connect? Does it give you an error message or a reorder or something? I'm worried about using them as my primary carrier if this is the case. I noticed that they supposedly only allow 4 channels for free and then you have to pay $20 a month extra per channel. I'm guessing this is for inbound

RE Message: 5 Date: Sat, 7 May 2005 23:18:46 -0400 From: Andrew Kohlsmith akohlsmith-asterisk@benshaw.com Subject: Re: [Asterisk-Users] At home Asterisk via Broadvoice? To: asterisk-users@lists.digium.com On May 7, 2005 11:04 pm, John Stegenga wrote: > Broadvoice will give me 2 lines, with 2 phone numbers each - distinctive > ring - for a reasonable fee... Please do a google search for

Hello all, When I call the Broadvoice number all is good. When I try to call out through DISA on my broadvoice line i get the following: Executing Dial("SIP/147.135.0.129-0815bc60", "SIP/16037862111@proxy.bos.broadvoice.com|30") in new stack -- Called 16037862111@proxy.bos.broadvoice.com -- Got SIP response 480 "Temporarily Not Available" back from

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Is anyone else experiencing 404 errors on outbound dial with Broadvoice? I've followed the instructions posted by Broadvoice to configure sip.conf, and inbound calling works fine. Every time I try to dial out, I get a 404 "Not Found" error. Here are the relevant sections from my configs. sip.conf: context=broadvoice-in register =>