similar to: unloading TE110P bristuffed module cause kernelpanic

Hi folks, I've already searched the mailing list but no one else seems to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one

Hi all, I'm using Asterisk 1.0.9-BRIstuffed-0.2.0-RC8o on box A with a TE410P (EuroISDN cpe) connected to another similar asterisk box B acting as EuroISDN master. I'm performing some load tests by contiously feeding up to concurrent 30 call files to /var/spool/asterisk/outgoing/ on box A which inititate via a dialplan context/extension a outbound call (redirected via chan_local) to

Hi, I'm banging my head on compiling bristuff modules for Suse 10.0 with kernel : Linux laps1 2.6.13-15.7-smp #1 SMP Tue Nov 29 14:32:29 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux and Asterisk 1.2.1-BRIstuffed-0.3.0-PRE-1f . I get this : laps1:~/Voipy/1.2.1/bristuff-0.3.0-PRE-1f/zaphfc # make load make -C /usr/src/linux-2.6 SUBDIRS=/root/Voipy/1.2.1/bristuff-0.3.0-PRE-1f/zaphfc

Trying to compile BRIstuff 0.2.0-RC8o. Ran the download.sh and compile.sh scripts to automate the process. gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DZAPTEL_OPTIMIZATIONS -DASTERISK_VERSION=\"1.0.9-BRIstuffed-0.2.0-RC8n\" -DINSTALL_PREFIX=\"\"

Hi, we've purchased new Beronet Octobri card and have problems loading modules for stock Asterisk for Debian Sarge (it has bristuff patches in it). when loading qozap it says that no multibri card was found although lspci shows it... There were quite some rumours about bristuff not liking other than junghanns cards, but don't know if something happened.... Anyone recently used this

Hello, I have a problem with the Bristuffed version of Asterisk. I have tried Bristuff-0.3.0-pre-1m,n,o,p (Asterisk 1.2.6 to 1.2.7.1) but they all have the same problem it seems: The setup: A machine with a single hfc-s PCI BRI adapter running Gentoo 2.6.15. Asterisk 1.2.0 (BRIstuffed-0.3.0-PRE-1) installed and working perfectly. Grandstream gxp-2000 as a SIP phone, and a normal mobile

Hello everyone, I have been asked for "directed pickup" and saw that both "PickupChan" from bristuff and "Intercept" applications do the dirty work. I have tried both on asterisk-1.0.9 ( BRIstuffed-0.2.0-RC8o ) but I always got an error when trying to pick the ringing call. the debug says: SIP/marco-73a0 is ringing -- SIP/marco-73a0 is ringing --

Hi, I'm getting unreliable dtmf recognition (it works fine for 4-5 digits, errors (duplicates) on more), when transferred inband from gsm gateway to NT port of quadbri under bristuffed Asterisk..... Since Asterisk is claimed to have good dtmf recognizer, I suspect there are some settings to workarouned... I've tried dtmf relax, but didn't help, so I suspect gain settings.... Is

Hi, I've upgraded my Asterisk to 1.0.7version patched with bristuff 0.2.0-RC8c. I'm using the same extensions.conf but it seems now include instruction doesn't want to work, here follows an extract: [inbound_menu] include => ins_exts exten => _X.,1,Answer exten => _X.,2,Wait(1) exten => _X.,3,Background(msg) exten => _X.,4,Background(3-sec-pause) exten =>

Hi, BRIstuff contains two bugs in its implementation of the Redirect manager action: 1. If the property ExtraUnqiueId is used, the Priority property is used to redirect the extra channel (instead of ExtraPriority) 2. If the property ExtraChannel is used, 0 is used to redirect the extra channel regardless of the Priority and ExtraPriority properties. A patch for manager.c is available at

Hi all, I have a hangup problem when i get incoming calls on my ISDN interface. I use ISDN network controller [HFC-PCI] and asterisk with florz patch. Logs when the hangup happens follows: May 6 20:52:47 NOTICE[11532] cdr.c: CDR on channel 'Zap/1-1' not posted May 6 20:52:47 NOTICE[11532] cdr.c: CDR on channel 'Zap/1-1' lacks end May 6 20:52:47 DEBUG[11532] pbx.c: Expression

Ok, but is there a way to check if echo cancellation is active on a call in progress ? Thanks Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Steve Davies Inviato: marted? 28 marzo 2006 16.43 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Echo cancellation

Hello to all of you! I'm very new to this list and to asterisk and stuff at all. To build my asterisk server I installed a new machine running the new SUSE Linux 10.0 (retail version on DVD). I need asterisk (tried 1.0.9), bristuff (off junghanns.net, -0.2.0-RC8o) and the florz-patch because I have two HFC-S-ISDN cards in that machine. Now when it comes to compiling I get a huge bunch of

Hi everybody, I'm facing a strange problem after upgrading Asterisk from 1.0.9 to 1.2.4. Sometimes, when receiving an incoming call from pstn, although my sip phones ring correctly (I've got both softphones and hardware phones), noone can pick up the call. Asterisk CLI shows me that the phones are ringing, then nothing happens, so there's no problem _after_ someone picked up, simply

Hi. I'm trying to get a Beronet QuadBRI card work with bristuff drivers. Though qozap module loads right, all card spans are in deactivated status. I'm quite sure my configuration is correct and using a single BRI card instead of the quadBRI the status is active and I can place and receive calls. On Beronet installation manual I read that Beronet and Junghanns cards are identical in

Hi everybody. Just noticed that when calling a mobile phone, Asterisk doesn't bridge the voice message by telco if mobile is unreachable, but keeps on ringing till it receives a hangup signal. I think this is due to the fact that the message is played without the call has been answered, but I'm wondering if there's some way to let Asterisk realize it. All I see in the CLI is the line

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many

I did it Steve, but on some calls i still have the EC on OFF. What can i check? Could it depend of my zapata.conf ? Thanks Giordano Grandis -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Steve Davies Inviato: marted? 28 marzo 2006 17.08 A: Asterisk Users Mailing List - Non-Commercial Discussion

I'm using Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b - when anyone picks up a call with '*8' - the call will drop after about 20 or so seconds. Is this a general problem with Asterisk 1.0.2? As this is the latest release that it appears Klaus-Peter Junghanns has for public consumption - is there anything I can patch for just this problem - or has Klaus-Peter Junghanns (or anyone else) been

Hi Francois, I kwnow, but I have "DSP:on" also if i not have an hardware echocan module :/ and I always have "Echo Cancellation: 0 taps, currently OFF". This is my zapata.conf [channels] language = it usecallerid = yes callwaiting = yes usecallingpres = yes callwaitingcallerid = yes threewaycalling = yes cancallforward = yes callreturn = yes switchtype = euroisdn