similar to: Vodavi PRI issues?

I have two data frames, with two columns each, the first being a Date variable. I would like to convert them to xts objects, indexed by the Date column. I would like to use as.Date and not as.POSIXct as the dateformat. The puzzling fact is that it works for the first one but not the other. Here is a screenshot of the error: > str(DF1) 'data.frame': 367 obs. of 2 variables: $

Hello, if somebody using this scenario in production successfully, please send me info, which ISDN card for asterisk server is usefull for me (Digium, Sangoma)? my crucial requirement is "caller id name" transfer/display between ISDN (Siemens PBX) and IP phone connected to asterisk I'm using PRI interface and Q.SIG signaling. thank you PJ

Hi all, I'm having a problem with * being very finicky about the length of DTMF key-presses during menus, voicemail, etc. Basically, short (<100 ms) tones are ignored, anything between 100ms (or so) and about 300ms is correctly detected, and anything >300ms is interpreted as multiple presses of the same key. This is terrible for callers who are trying to get to the correct

This patch adds a TPM device model to the qemu dm for fully virtualized VMs. It is enabled in the VM only if the user requests a TPM device in the vm configuration file using the ''vtpm=[...]'' line. It enables the qemu device model command line with a ''vtpm_instance <instance number>'' parameter. Signed-off-by: David Safford <safford@watson.ibm.com>

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

Thanks James, What i need is to make the fax machines connected to the audiocodes mediant 1000 be able to send and receive fax throught Asterisk (connected to a pri) I know it's not reliable, but it should work at leaste, what should i do on Asterisk and Mediant to make this work? Im quite confuse with all these fax issues :S Thanks in advance > > Message: 11 > Date: Fri, 9 Apr

Hi all, Are there any issues to be concerned about when calls come in from PSTN to a PRI card and are forwarded back out the same PRI card? Anything different have to be enabled in zaptel.conf or zapata.conf or the Sangoma configs to make this work? What about using .call files that join two ZAP channels? Channel: ZAP/1/4081234567 MaxRetries: 0 RetryTime: 60 WaitTime: 60 Application:

Hi Guys, Anyone might know why this error keeps showing up and inbound/outbound is not working on a Bell PRI with Sangoma A101D? -- Got SABME from network peer. Sending Unnumbered Acknowledgement No calls can be made inbound/outbound. Keeps repeating. No alarms ON and no changes been made to the system. Stopped all a sudden. Asterisk CLI doesn't show anything with full verbose for both

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

Hi Everyone, I want to fine tune the Rx and Tx gain on an analogue Sangoma card by dialing into another server that is running on Sangoma PRI card (both services on Bell network). [mwatt1004khz] exten => s,1,Answer exten => s,n,PlayTones(1004/1000) exten => s,n,Wait(300) If I match the Rx/Tx numbers on both sides by monitoring "ztmonitor X -vv" am I right with my theory of

Hi all I've got a setup where I use a Sangoma PRI card driven via Sangoma WanPipe to connect to a legacy Samsung PABX (I'm not sure which model) form Asterisk 1.8.11.0. The reason is the customer has a large installed base of Samsung phones physically connected to it and on each users desk. They did not want to spring for a complete replace of all their Samsung phones with generic, and

I've been going back and forth with my telco for several days, trying different configurations to get a new PRI to come up. The bchannels are all up and the T1 is not in alarm status. The dchannel refuses to come up however. We've tried ni2, qsig, and now dms100 for the switchtype. The telco tech I've been working with says that he's been sending "reset all channels"

We have a PRI from Telepacific. Asterisk 1.2 and a Sangoma A101 T1 card. Outgoing calls to certain toll-fee (8XX) numbers fail -- we hear ringing but the calls are never answered. All other calls, and most toll-free numbers are not affected. The numbers that are affected are all travel related companies (United Airlines, American Airlines, US Air, Starwood Hotels, etc.) we cannot connect to

Hi, I have a client who has a system with a Sangoma 1 port PRI card with echo canceling in it. For some reason, when the system comes up the PRI will stay up for about 4-5 hours, then drop. "zap show status" shows everything as ok, but we can't make or receive any calls until the system is rebooted. Just restarting asterisk does not fix the problem. I am going to call

Hello, I have a Sangoma A101 connected to an ISDN30 (E1 in the UK) with some Snom 300 and Idefisk softphones. I can do SIP and IAX2 calls just fine, however I cant get any audio in either direction on the Zap channels. When I call in or dial out over the ISDN30 (UK E1) I can see the call answered/placed on the CLI and then silence follows. I've been provisioned 25 out of the 31 channels only

Hey all, I had a user complaining of calls which were dropping mid-conversation. I looked into the time of one of the calls, and saw the following: Apr 4 12:13:03 WARNING[6670] chan_zap.c: No D-channels available! Using Primary channel 28 as D-channel anyway! Apr 4 12:13:05 WARNING[6660] channel.c: Avoided initial deadlock for '0x82b8430', 10 retries! Apr 4 12:13:05 WARNING[6660]

I'm trying to make the MWI indicators on my client's Vodavi Starplus DHS phones work. The actual signalling - in-band DTMF from the ZAP interfaces directly to the PBX system - works fine. I can manually tell asterisk to send "#9610" as DTMF and voila, the MWI on extension 10 lights (or goes out.) The question is, how is this integrated with voicemail, i.e. so that the MWI

Hello, I am having an issue with making two simultaneous outbound calls. When I dial, both phones try to take the same channel and it causes an error. Anyone have any suggestions. My set up is as follows: CO - PRI - ASTERISK - VODAVI(pbx). Thanks, Dave *CLI> -- Starting simple switch on 'Zap/69-1' -- Executing Wait("Zap/69-1", ".1") in new

Does anyone on this list know of any Linux based apps that will work with Dialogic or Brooktrout that provides voice-mail/Autoattendant only?? It seems that Panasonic, Avaya, and Mitel all use Unix/linux based OS on their firmware for their proprietary voice mails. My wish list would be; A software that provides all of the drivers for a dialogic or brooktrout board Voice Mail Messages in WAV

I'm currently looking to interconnect my Asterisk PBX system with the PSTN via a digital PRI/T1. I know a multitude of options exist for internal PCI cards (Digium/Sangoma/Rhino), I was wondering if anyone has any experience or recommendations of external PRI media gateways that support SIP. So far I've found: VegaStream Vega 400 Audiocodes Mediant 2000 MediaTrix 1531 However they are