similar to: No ringback tone generated by Asterisk with OH323 connections

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

I have just bought several Sipura SPA-841 SIP phones, and after some testing I have found out that the volume received by other parties when calling using the handset is very low. I've been able to reproduce this problem in the 3 phones I've tested so far. I've tried tweaking several configuration options but nothing I has helped so far. Has anybody else experienced this problem?

We intend to use Asterisk with a very large dialplan (with a lot of functionality for 3000+ users). Each user will be able to change several of his parameters in the dialplan, so we will be forced to reload the diaplan constantly. Has anybody else any previous experience with a similar installation? There are some things that we'd like to know, if anybody can help us. These are: - Is

I'm having some trouble dialing phone numbers in Argentina with Digium Zaptel cards. Does anyone have some sample configuration that works with Digium TDM04B cards in Argentina? I'm mainly referring to the /etc/zaptel.conf and /etc/asterisk/zapata.conf. I have two Zaptel cards: the first one has 1 FXS port and 3 FXO ports; the second one has 4 FXO ports. My current configuration is

Is there anyone who is currently using Asterisk as a production H323 gateway? And using which combination of asterisk and H323 (chan_h323, chan_oh323?) The main issue is interoperability with other H323 parties (Cisco AS53xx, Nextone, etc). Searching the mailing list it seems that both h323 and oh323 are not so stable, is it only an impression or using h323 is really not so advisable?

Hello everybody, for all of you that have searched for a real fax solution, look no further. We now have T38 faxing. Please contact me for more information. Thanks Michael D. Schelin ShellTel 626-814-2354

I'm currently writing some code to support conferencing in Asterisk without using the Meetme application. The conference runs in its own thread and every new inbound or outbound channel that is created is passed to it. This thread runs the conference loop reading and writing frames to each channel. I'm writing this as if it were a bridge with more than two channels, and I'm not

A non-text attachment was scrubbed... Name: not available Type: multipart/mixed Size: 1516 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050702/1e189d92/attachment.bin

Hi, all. I am building a SER+asterisk PBX airming at around 10k persons' usage. For authentication purpose I am in favor of ldap storage, while I am not sure the current ldap module for asterisk(0.9.9.2) is stable enough? sorry I do not master the proper testing mechanisms to find out myself. Thanks in advance.

Hi all, I was reading http://bugs.digium.com/view.php?id=2639 and it seems that anthm's great native MoH patch only works on HEAD. Does anyone have a version of the native MoH patch that works on 1.0.8? If so please point me to its location or email it off-list. Thanks and regards, Patrick

Hi Guys! I have a problems with some sipuras 841 and asterisk 1.0.9. Im using 841 with asterisk 1.0.9 with a digium card (single e1 span) with steve's unicall. Everything compiled fine and in fact I can make and receive calls but I have a problem with bad sound when the sipuras call the outside E1's lines. I can listen to the caller without problems but they heard me with a choppy

Hi, all I am a pabx vendor from Singapore. Recently we are going to implement a failover solution for our customers using heartbeat, the asterisk server can failover perfectly, however the g729 codec canot work, because it is binded the mac address, we have bought two set of licenses, can you provide us some workaround for this scenario? Regards, Liangliang

Hi What command i need to use to make a call with oh323 and hear the ringback sound Thanks

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! I am having problems with the PlayTones application and VoIP softphones. I have the following in my extensions.conf: exten => 123,1,Answer exten => 123,2,PlayTones(Busy) exten => 123,3,Hangup But when I connect with gnophone(IAX) or kphone(SIP) and dial 123 the call just hangs up immediately. I get the following on the console: --

Is there any stable version of spandsp that works on a 64 bit Linux on an AMD64 machine. When compiling version 0.0.1k I get the following error: gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -c testcpuid.c -MT testcpuid.lo -MD -MP -MF .deps/testcpuid.TPlo -fPIC -DPIC -o .libs/testcpuid.lo /tmp/ccXxGHg6.s: Assembler messages: /tmp/ccXxGHg6.s:8: Error: suffix or operands invalid for `pushf'

I've complied the OH323 .so successfully and can easily receive calls from my H323 gatekeeper (using 711u), however it seems that all outgoing calls are refused and I'm getting "reason 23 (Temporary failure)" as an error code which I can't find documented everywhere. My H323 gatekeeper needs a 001NXXNXXXXXX to dial out to the PSTN even if I'm in north america (Montreal)

Hi, I've noticed that sometimes instead of getting a regular ring tone when calling out on a Zap channel, I get this obnoxious loud noise which forces me to hang up. Is this a problem in the Zaptel driver? I seem to recall that ringback tones are generated by zaptel when dialing out from a SIP phone over a Zap trunk. Thanks.

I am trying to get Asterisk to emulate the sounds of the earlier telephone systems, and the settings in [us-old] are pretty helpful. The only thing lacking is ringback tone, which is not quite as complex as the real phone systems of the day. For example, it is true that a ringback tone commonly used is 420Hz modulated by 40Hz. This is what shows up in [us-old]. But that modulated tone was

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Hi, I have PRI configured and up but when i am dialing outside i am not getting any ringback tone but my call is connected. following is my example SIP----------------->PRI ------------> mobile I have set progress=yes in chan_dahdi.conf but still not working if i call inbound from my mobile to internal extension ringing working please help me -S -------------- next