similar to: Zap FXO/FXS issues, 1.2.0-beta1

Folks, I recently swapped a TDM400 FXS card that was working perfectly into a new server (running recent CVS), and it's either misbehaving (unlikely), or I've missed something obvious (much more probable). Everything seems to be working, but I can't get any dialtone from it when I plug a phone into any of the 4 ports!! All of the jacks are lit (green lights) but they all seem dead

I am having a problem with Red Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different

Hello I have installed my new E100P card in the same machin with two TDM04B cards. I have followthe instructions on http://www.digium.com/index.php?menu=configuration#T_E100P_PRI This is my zapata.conf span=1,0,0,cas,ami fxsls=1-15,17-31 dchan=16 fxsks=32-39 loadzone = us defaultzone=us I do *modprobe zaptel wct1xxp wcfxs ans seems to work ok. * But when i do ztcfg -vvv i got Zaptel

I have a pair of Asterisk servers which are happily routeing VoIP calls. I want to hook one of them to the PSTN. Given that I am in the UK, what is a reasonably easily-available device to provide an FXO interface from a Linux box, with a minimum of faffing around with drivers? Just one line is needed, though in theory two might eventually be useful. My usual white-box hardware suppliers don't

Em (20:59:21), Asterisk Users Mailing List - Non-Commercial Discussion escreveu: >On Tue, Jun 21, 2005 at 08:09:52PM -0300, Alessandro wrote: >> >> Does Somebody know why no load modules to FXS? I used zaptel-1.0.7 >> version. > >What color are the modules? >Post your /etc/zaptel.conf > >-- >Mike Mike, The color is green, red ans bluw. Link

so i have been running v1-0 on all of my test boxes for about a month now testing iax/sip/res_xxx. I decided to put it into production so I updated a box that was running 0.9.? that had been working perfectly for months and low and behold the inbound line from telco now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this

Hi there, I have a cablemodem, ARRIS brand, model tm502G. It has two FXS ports. I was wondering if anyone has details about the correct signalling of these FXS ports when connected to original X100p. Tests: fxsks on the zapata.conf and zaptel.conf files. From my cellphone I call the ARRIS, it starts ringing but the zap channel sees no call coming in. fxsls on the zapata.conf and zaptel.conf

Hi all, Does somebody know why no load modules to FXS? I used zaptel-1.0.7 version driver. [root@server1 zaptel-1.0.7]# modprobe wctdm ZT_CHANCONFIG failed on channel 3: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? /lib/modules/2.4.21-27.EL/misc/wcfxs.o: post-install wcfxs failed

Hi All; Can I do transfer for the call from zap/1 to zap/2 (both are fxs)? All what I need is to add the t argument for the Dail function? And how can I transfer to be in that senario: zap/1 dial a code to transfer for zap/2, once zap/2 answered, then he can talk with zap/1 (where the third party will not hear what they are talking), then if zap/1 hanged up the handset, the call will be between

G'day all, A weird problem has just started happening with my * server, and I've googled myself stupid looking for help. My system is latest CVS, a TDM400P with two FXS modules, two X101Ps, and VoIP connections (SIP, SCCP & IAX2). My wife complained about her extension (analogue, on one of the TDM400 ports) being dead -- no dialtone. I had to shut down *, then unload and reload the

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

I have a Digium TDM400p (1 FXO, 1 FXS) with the FXS module connected to a standard analog handset with caller id display (US caller ID). Although it appears that caller id information is coming into asterisk (it shows up in voicemail), I can not get it to display on the analog handset. Is there anything special I need to do to send the caller id info out the FXS port? I've tried a few

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

Hello, is there a full guide to what kewlstart is supposed to do with FXO or FXS lines ? is it only applicable to one of the interfaces FXO -or- FXS but not both ? I asked earlier if FXS lines can be made to reverse polarity, and someone else pointed out that the chipset on the FXS ports seems to support it, perhaps the driver in the asterisk zaptel interface module needs to be modified to support

Hi, I have had this issues for ages but have ignored it, but my handsets get faint background crackle on the FXS port. When I connect the handset directly into my PSTN, it goes away complete, so I am generating this from somewhere in my asterisk box. I get it immediately when the phone goes off-hook and it stays through the dialing and call progress. I can't think of any other devices

I am wondering if anyone could help me figure out how to turn down the volume on all the dial tones, indications, etc.. and especially the call-waiting CHIRP! I don't want to change the txgain and rxgain because they are working at levels that I would like. However, when voice conversations and voicemail recordings are at good levels then the dial tones, busy tones, etc are way too loud.

Okay, I'm going to preface this by saying I'm sure I've overlooked something really basic here. I just need someone to hit me with a clue stick and point out what I'm missing. I've got a TDM card with four FXO modules. I've plugged one of them into a PSTN line. I'm working through the examples in the Asterisk Documentation Project guide, but I can't get Asterisk

Hello, I am having problems configuring a TDM400P 4 Port FXO card with groundstart signalling. The box has 2 X100P's, 1 TDM04B and 1 TDM40B. I can configure it for loopstart and it works, just not groundstart, which I need for this installation. What am I missing? Thanks! Mark /etc/zaptel.conf #two X100P FXO Cards # fxsls=1-2 # TDM400P 4 Port FXO (TDM04B) fxsgs=3-6 # TDM400P 4 Port

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it will not ring, although I can call out from it. I have also tried my GPO 332L

Hi All, I've got an MD3200 modem which is working as a Zaptel FXO interface for Asterisk (X100P clone I believe). It seems to work, but on incoming or outgoing calls I can hear the other party ok but when I speak, I hear my voice echo back at me (quite quietly but it's distracting!) on everything I say. The other party doesn't seem to hear the echo - they just say I sound a bit quiet.