similar to: unable to use misdn group dial

You're quite right. We'll need to see your misdn.conf file to check the settings. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 13:49 -->> To: asterisk-users at lists.digium.com -->> Subject:

Use Set(CALLERID(num)=9999999999) instead of using CALLERID(all). Remember to set this BEFORE you Dial. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 12:36 -->> To: asterisk-users at lists.digium.com -->>

Hello, I have some problems with mISDN. I can't send or receive call from the Billion ISDN card Mi configuration files are thoose: extensions.conf: [general] static=yes writeprotect=yes [SOME] exten => 101,1,Dial(SIP/101,30,Ttm) exten => 101,2,Hangup exten => 102,1,Dial(SIP/102,30,Ttm) exten => 102,2,Hangup include => outgoing [outgoing] exten

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

Hi, I'm bumping on this : cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_18 make <snip> In file included from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/core.h:9, from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/avm_fritz.c:20: /usr/src/mISDN-1_1_8/include/linux/mISDNif.h:791: error: field

Hi Everyone, I have an asterisk box in my office. It does not display the correct Incomming Caller id. For incomming we are using ISDN Bri line which is terminated in a Digium 4 port bri card (B410P). Like if a number say 02 12345678 calls to our line asterisk displays it 12 12345678. Similarlay if a mobile number say 0416 123456 dials us , asterisk displays 1416 123456. I am not sure where the

Hi, Before diving into this, I would very pleased to know if someone could yes or no, successfully compile mISDN 1.1.8 on Lenny (latest RC1 or beta2 version) ? Regards After a fresh install on Lenny, I can reproduce at will : apt-get install build-essential linux-headers-2.6.26-1-686 cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_8 make ....

A plea to all! Has anyone had any success with two or more avm fritz pci cards with either misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? I have managed to get misdn to load under 2.6.13 and detect two cards using misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but the second card/controller doesn't answer or dial calls. But if I try misdn

Hello I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine. I am using the OpenVox B200P ISDN card. My problem is that even though chan_misdn module seems to be loaded correctly with Asterisk (I can see it using 'module show' command) the misdn commands are not available to me in the CLI so I cannot tell if my box is correctly interfacing with the ISDN card Any ideas

Hi. I'm having problems with chan_mISDN configuration. Line "echotraining=yes" causes warning, when Asterisk is parsing misdn.conf and I'm confused why the PBX doesn't accept the setting. No matter which section I try to offer it, it is always invalid or out of range. The setting itself is supposed to be valid, it is in the sample configuration file of chan_mISDN 0.3.1.

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget

Hi, Until now I've been using my Digium B410P cards with misdn 1.0.x. I would like to upgrade my systems and am now wondering which is the "best" route to take: - use the latest release of misdn v1 - upgrade to the latest "stable" kernel and use the built-in misdn v2 - use misdn v2 as a seperate package (disable misdn in the kernel) - use dahdi's support for misdn

Hello, I'm evaluating to possibility to use chan_misdn as a short term workaround, in case latest Dahdi is not stable enough for what we are planning to do (we wish to use Junghanns and Digium BRI hardware with Asterisk 1.6) . I've read www.mISDN.org but still have a couple of questions : 1. Is correct that in a 2.6.27 (and up) enabled kernel, the "embedded" mISDN version is

I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0

Hello everybody. I am trying to configure an Asterisk on Debian with the Billion ISDN card. I am using mISDN. But when I call on the CLI apears this: -- Executing Dial("SIP/101-081805b8", "mISDN/1/943833473|45|tTwW") in new stack -- Called 1/943833473 P[ 1] empty_chan_in_stack: cannot empty channel 255 P[ 1] --> we have already send Release_complete == Everyone is

Hi, I have FRITZ!Card PCI card. I have installed misdn-1.1.0 on stable debian 3.1 with 2.6.8. kernel. Then I reboot system, and it doesn't boot, it stops near "Apache2 starting...". I started my system with "recovery" kernel, and tun off misd, then my system works fine. I think it's problem with memory. Has anybody debian and misdn working fine? Maybe you can

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6

Hello, Following my first mail about this issue [1], I think I know now what the problem is. When I have both lines being used and a third call comes in, the person calling doesn't get a busy tone, he gets something like line unavailable. I've been debugging mISDN and I think the reason is because asterisk is sending the release cause as 0. P[ 3] --> channel:0 mode:TE cause:0

Hi list, I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in zaptel dir and: make, make install, make b410p. Everything is ok. Now I want to compile Asterisk but can't activate the chan_misdn channel which depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E) When I made the make b410p, all

Linux 2.6.20, asterisk 1.2.23, mISDN 1_1_5, Digium B410P BRI card. When calls come in via ISDN the destination phone does ring but the caller hears no ringing tone, once the SIP phone is answered everything works as expected. Calls from SIP phone to SIP phone internally do let the caller hear a ringing tone. With full asterisk logging enables the logs show: Aug 10 17:43:44 VERBOSE[1810]