similar to: HP DL360 G4 EM64T and hyperthreading options

Hi Guys Im trying to complile Asterisk on my new dual Xeon 3.0ghz EM64T machine. Im running Debian 3.1, and have installed the 2.6.8-11-em64t-p4-smp kernel (and headers). The system is working fine and is detecting both CPU's (4 actually, with hyperthreading). But when I try to compile Zaptel, Im getting this error: /lib/modules/2.6.8-11-em64t-p4-smp? /build make -C

My Dell 2800 Dual 64bit Proc. machine came in with hyperthreading enabled. (they call it virtual processor??) I have been intending for a month to disable it. Tonight, I rebooted, turned it off, and let the system come up. zaptel loaded and asterisk loaded, but both of my t1s were red. (it is a TE411P) /proc/interrupts looked OK, zttest gave OK numbers. I doublechecked all of the files in case

I'm looking to install Asterisk on an EM64T Dell 1850. PERC raid 1, 1GB ram, single 3Ghz Xeon. Any red flags or anything I should know? Should I bother installing a 64 bit OS? (gentoo-amd64)? Does asterisk work in 64 bit mode? Should I turn hyper threading off? Etc?

Hi all, My Ct's box is RH 3.0 SMP kernel EM64T. They are asking if OCFS for SMP (EM64T) is available or not. In following site, we can not see OCFS for SMP (EM64T). http://oss.oracle.com/projects/ocfs/files/RedHat/RHEL3/x86_64/1.0.14-1/ ---------- ocfs-2.4.21-EL-1.0.14-1.ia32e.rpm OCFS driver for kernel version 2.4.21-27.EL and higher (EM64T) ocfs-2.4.21-EL-1.0.14-1.src.rpm OCFS driver

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic", we disabled all the

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel

Hello, Will switchning to 64bit distribution (intel EM64T) provide any performance gain to the networking code: routing (lots of rules and big routing tables), scheduling (htb) and iptables? Thank you. -- Anton Glinkov network administrator

Hello List, I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot, and found (very old, many years ago) messages saying these

Hi, A new version (2.0.8-2.centos) for yum has been pushed to the mirrors for testing before going into the main tree. This release only includes a small fix for EM64T machines running the x86_64 version of CentOS 3: the ia32e architecture is now recognized for yum as an compatible architecture name. The only CentOS ia32e.rpm are the kernel and kernel-unsupported rpms. No one has reported the

Hi - Running into the error below when copying over large files via ssh. This occurs even when I have vm.overcommit_memory=2 set in /etc/sysctl.conf. The research I've done indicates that this is a bio-uses-GFP_DMA bug with EM64T. I'm running CentOS 4.4 with the 2.6.9-42.0.3.ELsmp x86_64 kernel on the following hardware: 2 x Intel Xeon CPU 5148 @ 2.33GHz Supermicro X7DB8 motherboard

Hi all, We have Xeon-based system with only 1 (hyperthreaded) CPU (in a HP DL360). We are seeing high load on multiple meetme session as well as g729 transcoding. My question is will putting an extra CPU help or does Asterisk just run on a single CPU. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Hello! I have been successful using SYSLINUX and Etherboot to create a generic "PXE-on-a-disk" package, a floppy image and CD image that support as many Ethernet cards as possible. These have support for all of Etherboot's modules that support real PCI cards: about 25-or-so drivers and 250-or-so cards. I've built Etherboot ZLILO images, one for each driver, set up to boot

Greets Anyone on the list using newer HP G4 or G5 server hardware like DL36X or DL38X with Centos? Or other HP hardware? Are you running Intel, AMD, or both? Are you using SAS or SATA or a mix? Are you using Centos 3, CentOS 4, or starting migration to CentOS 5 Are things rock solid stable without any issues? I know older Compaq and HP boxen have been rock solid for us for years yet we

Dear mailing-list members, In the days of cheap RAM and microarray applications feasting on memory, 64-bit computers become more and more useful - to actually make use of memory beyond the magic 4GB border. I would like to report the success of running 64-bit R on an Intel Xeon EM64T machine under Linux. Just like on an AMD Opteron, R v2.0.0 compiles fine (and out of the box) and is happily

Hi, I can''t get rid of an annoying domU machines hanging issue with Hyperthreading enabled in my BIOS. Hardware config: IBM x325 series 2 * CPUs Intel Xeon 3.06 Ghz Xen version: 3.0.0 Kernel version: 2.6.12.6 Linux distrib: Debian Sarge 3.1 r1 I run 1 domU machine on my dom0, here is my Xen config: . xen0: /etc/xen/xend-config.sxp : (dom0-num-cpus 0) .