similar to: Can't receive Faxes with Asterisk (help)

Hi, I am trying to receive a fax with the spandsp library. The sending fax says "success" but there is no tiff file generated. I use "exten => 7000,1,rxfax(/tmp/testfax.tif)" in my extensions.conf. The connection is via SIP/G.711 as I have read on the list that this can sometimes work (I know Fax over IP is troublesome without T.38). I think the transmission should not

Can anyone point me to a good howto or example on how to get * to recognize inbound faxes and adjust accordingly? Ideally I would like it to grab the fax and email it to me, but I dont know if that is really possible yet or not. Thanks Neri -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to use the spandsp fax-back facility and despite I can send and receive faxes, this is not working fine. I would like to get a debug of what is going on. I am using the flag debug, but I don't know if txfax is generating any log information or where it is saving it. I just don't find anything. My line in extensions.conf is: exten =>

Hello, I have a question regarding incoming fax to local file (on the Asterisk server). While the fax is received properly (I have the tiff file generated as expected) I get the warning 'FAX CNG detected but no fax extension' on the consol. If the fax is received ok then what 'fax extension' does it expect and what should I do there? My Setup: Sender -> Public PSTN ->

Nobody seems to use txfax or does nobody have any problems with it? I have sent mails to most lists and get no reply. I cannot get a fax to go through with txfax. I use a call file as a test and all I get on the receiving fax is a bunch of vertical lines. my call file is: Channel:Srx/gout/4658158 MaxRetries: 0 WaitTime: 20 Application:txfax Data:/etc/asterisk/testfax.tif|caller|debug FYI

Hello everybody I'm trying to enable the Digium res_fax app at my *11.7 Server. a fax show stats comes up with FAX Statistics: --------------- Current Sessions : 0 Reserved Sessions : 0 Transmit Attempts : 0 Receive Attempts : 1 Completed FAXes : 1 Failed FAXes : 1 Digium G.711 Licensed Channels : 1 Max Concurrent : 0 Success : 0 Switched to

Hi all, After a long time having no time, I have finally done some fresh work on my software fax machine. I have replaced the original carrier tracking with something more robust. I have also added 4800, and 2400 bits per second modes, and cleaned up a few bugs in areas like superfine mode operation. I apologise for this update taking so long. At ftp://ftp.opencall.org/pub/spandsp you will

I downloaded it yesterday,first stuck by the login name and password in its admin page,there is no place in the document mentioned the password.It took me half hour to google,finally found the login name is maint,felt quite frustrated,why they lost such important info.? then I added some accounts according to the instruction ,seemed quite easy.again ,encountered several problems unsolved after

Hi, I'm trying to setup a system where incoming faxes are received using SpanDSP and then send on to another (remote) fax machine. The SpanDSP part is working excellently, however I dont seem to be able to get the forwarding part to work. Heres what I put into my extensions.conf: exten => s,4,Answer() exten => s,5,Set(FAXFILE=/tmp/fax-${UNIQUEID}.tif) exten =>

Here's one last plea for help from the list before I give up on the totally cool software FAX modem concept in complete despair (for now, at least, until I have more time to dig into it).... I am simply not able to successfully receive a FAX no matter what device I transmit from or how I bring the call into Asterisk. My lastest effort was a call from a Pitney-Bowes FAX machine into an X100P

I am attempting to get fax detection to work. I am using a NETjet-s card under ISDN4Linux. Asterisk does not seem to be detecting the fax tone. I have tried following as a test: [MainMenu] exten => s,1,Answer exten => s,2,DigitTimeout(3) exten => s,3,ResponseTimeout(5) exten => s,4,Background(Welcome) exten => s,5,Background(MainMenu) exten => fax,1,Dial(Zap/1,,d) [FaxTest]

Hi all, Recently, I have upgraded the asterisk as following. asterisk-1.4.13 asterisk-addon-1.4.4 libpri-1.4.1 zaptel-1.4.5.1 Usage of the server: inbound and outbound call, queue, mixmonitor, meetme, moh After upgrade, the server get segfault randomly and asterisk crash and restart itself. I got 2 core dumps of the segfault. Based on the core dump, we can't figure out the root cause to

Hi, Does MeetMe in Asterisk 11.4 set some kind of exit status or a var so I know for example if a conf ended normally or if someone gave a wrong conf number or pin? Thanks, Patrick

Hi, I'm trying to detect and or log the duration a a conference (Meetme). I need it in order to do some billing for theses services. Any ideas on how to do it? I googled around but found nothing. Thanks in advance epablo -- Pablo Endres <epablo@comvoz.com> ComVoz Communications USA: +1 954 343-2085 Ext 199 Venezuela: +58 212 7713195 Ext 199 Colombia: +57 1 3256840 Ext 199

Hi, People often send me audio logs from spandsp's soft-fax machine, where they have problems with corruption in the middle of a page for most or all of their faxes. Their problems are usually due to frame slips. However, recently I have received audio logs from two people who generally have great success with my software, but who find one or two machine regularly fail to send faxes

I'm trying to clean up some notices/warnings that are repeatedly logged in *.Any Help would be appreciated as I'm not sure of the cause /solution. Here are the errors: Nov 17 15:53:38 WARNING[1217602880]: File chan_zap.c, Line 1321 (zt_call): cidspill already exists?? +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ /* Don't send audio while on hook, until the call

Dear Steve i have try SpanDSP from the first version to the last one (1k) with my Canon FAX and with my modem but every time i see a lot of message like this: ----- I send a Fax from my Canon B150 i have the following error: -- Starting simple switch on 'Zap/33-1' -- Executing RxFAX("Zap/33-1", "/home/user/testfax.tif") in new stack Changed from phase 0 to 1

Dear Steve after a lot of compile from spanDSP first version to K and after i have compile * HEAD and Stable i cant understand where im wrong... - Mandrake 9.2 - libtiff3-3.5.7-11mdk I have add Header from your FTP but the result is this error.. Can you give me your opinion? Thanks in advance Dimitri -------- -- Executing RxFAX("Zap/35-1", "/home/user/testfax.tif") in

Hi, I've been trying to get fax going for the last few days. I can receive fax with Spandsp 0.0.2pre19 on Asterisk 1.0.9 with rxfax, but when I tried sending the received fax file to a fax machine, I either get "line error" or just a blank page. Is anyone using Spandsp to send fax to fax machines on PSTN? I've run out of things to try now, and I'd really appreciate if

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"