similar to: Continue dialtone after pressing 9

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

Guys.. Im new to asterisk but is it possible to simulate a dialtone for example, in other PBX when you pick up the phone you can hear a certain dialup, which is the PBX dialtone, and when you hit 9, you can hear the PSTN dialtone, is this possible? __________________________________________________________________ Anton Krall

Hi everyone! I'd like to create the following: a user picks up the phone (gets a dial tone), dials '0' for an 'outside' line, gets a second (different?) dialtone, and is able to enter an external phone number. How do I implement this in extensions.conf...? Regards, Evert

I've got a problem w/ zap calls being dropped right after they are answered. I have a log file: http://pastebin.com/368526 Everything looks OK except for the DEBUG[25563] chan_zap.c: Exception on 9, channel 1 that seems to come up quite often. As soon as the other end of the Zap answers (my cell phone), and I can even hear a half second of noise, the line goes dead and gets hungup. In

I've got an issue w/ 1.2.0beta1, where if I call VoiceMailMain from a sip phone, and then either put in incorrect passwords or just hang up, I never get a Spawn Extension that hangs up the call, and my sip phone is not capable of making any more calls until I restart the daemon. Can anybody help me fix this? -- Jesse Keating GameHouse -- Systems Engineer

When I hang up in voicemail, Asterisk seems to stop responding. (hangup vs pressing # to disconnect). After that, no calls can be made until I restart Asterisk. In IRC, a developer seemed to think it had to do with me using switch => in my dial plan. Basically I never see the calling extension get the -1 signal. Can somebody help me figure out why this is happening and how I can fix it

Hi folks, New to the list. Just updated the bootrom and app firmware on a Soundpoint IP 501 as per: http://www.voip-info.org/wiki-Polycom+Phones Updated from: to: APP 1.4.1.0040 1.5.2.0054 BootROM 2.6.1.0003 2.6.2.0032 After I did this, it appears that the Web interface for the phone won't change the settings, nor will it actually reboot the phone now. What do I

Hi I have the following configuration at home one ZAPTEL interface connecting to an FXO card and two SIP UAs connecting to asterisk locally. I have configured extensions.conf such that dialing 9 on the SIP phones allows me to dial an outbound number via the FXO interface . Works fine. What's not working is that pressing 9 should causes either GS BT-100 phone to reacquire a dialtone

I have 2 problems with openswitch12: 1) I can not make work "ignorepat => 9" i do not get dialtone after the number is dialed, the system ignore the number and i can go on dialing the rest of the number.... but when i want to take the line teh dialtone do not stay. 2) when i tray to leave a message on the voicemail of an user i get the following error Sep 3 17:04:55

HI, I'm using netmeeting to connect to an asterisk server and dial out. my extension looks like this exten => s,1,Dial,Zap/1/ Unfortunatelly the number that I have dialed in Netmeeting is lost ;-( If I hardcode the number on the line above, like ... exten => s,1,Dial,Zap/1/6642794 ... everything works fine What am I missing?

Hi all, this is a rather "newbie-oriented" question, so please bear with me... The system running Asterisk has been provided with an AVM FRITZ!Card PnP. SuSE Linux 9.0 recognizes it right after booting the system and it seems to be configured (MSN) correctly... The hwinfo looks like this: --- pbx:/etc/asterisk # hwinfo --isapnp 11: ISA(PnP) 01.0: 10300 ISDN Adapter [Created at

I tried following the Wiki page regarding the Polycom 501 and having the same extension appear on all 3 line buttons (just like my cisco) but I'm having no luck. Has anyone else had success in doing this? Perhaps someone who has been successful can update the wiki? Thanks, Matthew http://www.voip-info.org/tiki-index.php?page=Polycom+Soundpoint+IP+501

Hello, Can anyone point me in the direction of software to monitor channel usage on voice T1s? Using a TE410. The wiki documentation seems geared to SIP channel usage.... Thanks Charles -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051004/8450d0c2/attachment.htm

I tried putting this as the ata's dailplan: *St4-|#St4-|9|^9t4>$.- this is sip.conf [ata2001] type=friend username=ata2001 secret=SoMeSeCrEt host=dynamic context=fromata canreinvite=no and this in extensions.conf [fromata] ignorepat => 9 exten => _91700NXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel) exten =>

I have installed Asterisk and i have configured with two SJPhones; i am able to make calls between these two phones.I am planning to develop a application basically web based application from which the administrator able to trace the call logs or call summary, i mean from which user agent to user agent call is going , and what is the staus, if second user tranfers the call to the third

The way I have my dialplan configured, an internal extension is routed to a different context (with Goto()) on pretty much the first button press. 2 -> internal extensions 0 -> operator 5 -> VM 9 -> outside line etc. So a "201" will go to the internal extensions context, s,1, do some setup and then match on "01". The thing is that when the 9 is entered, I

Hi all - Been using Asterisk installed on Debian and love it. But it's time to rearrange some lines and looking for a few features I didn't enable or have in the dial plan the first time around and wondering if you would recommend doing it through configs again or if one of the prepackaged solutions would more easily support these needs. One that caught my eye was TrixBox but I'd be

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right