similar to: SNOM 190 '486/Busy here' after upgrade to firmware 3.60s

AHA! # 1 is the case! Seems the user was fooling around with the phone after the firmware upgrade. Shame that that setting couldn't be locked out. Thanks to Mr Tahir and Mr Stredicke for their spot on responses. -----Original Message----- From: Usman Tahir [mailto:Usman.Tahir@snom.de] Sent: Friday, September 23, 2005 12:34 AM To: ColinA@landmarkmasterbuilder.com Cc:

I have a Snom 190 that refuses to accept calls after upgrade to firmware 3.60s, latest. I get "SIP 486/Busy Here". No change in the dialplan, nor settings in the phone. Calls out fine. I did 30 other phones yesterday with 3.60s with no problem, this is the only one. In the phone's log I get: [5]22/9/2005 17:01:00: timeout::callback: Registering with timeout of 0 ms [5]22/9/2005

Hello, I have BLF working on Snom phones. Ringing state (blinking) or "on the phone" state (solid) are working well. So the buttons are configured as "BLF" in the Snom webinterface. Now I would like to add another state for unavailable or dnd. In fact I would like to turn the LED red in the case the phone is not registered or the user pushed the DND button. So I though

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031221/41e5bcd1/attachment.htm -------------- next part -------------- Hello All, Whenever I try calling SNOM 200, I am getting "Everyone is Busy at this time" message though line is free. I tried with firmware image of 2.02t and 2.03b (this I received from SNOM customer support) but

Found out I was doing it right, but the outbound firewalls that the Snom's sits behind has a captive portal that intercepted the HTTP request. Adding the Snom's MAC address to the firewall's captive portal worked correctly. A shortcut for any future Snom users that want to update firmware remotely: 1. In the web portal, click Advanced 2. Scroll down until you get to "Update

Anyone know how I can push a firmware update to a Snom 190 without using DHCP? In the web interface, I specify a path to the Snom firmware, and it works, except I have to physically press OK to get the update to download. I need to do it remotely...

Hi, I'm looking to disable rejecting calls from my call center employees. They are using Polycom phones. Is there a way to either disable the reject/DND features on the Polycom phones (don`t think so) or have the Asterisk PBX ignore "Got SIP response 486 "Busy Here" back from 12.23.34.45" response from specific phones/SIP registrations and just keep on ringing?

Hi All I was working in an env that had some Snom 200 with release 'r' firmware i beleive, when thy put the phone in DnD, mode then released it from DnD mode, the phone does not re-register with * Does anybody else observe the behavior ?? Is is a config issue

I am using the snom 200 with Phone type snom200-SIP Version snom200-SIP 2.04g Bootloader URL http://www.snom.com/download/snom200-boot1.9.bin Firmware URL http://www.snom.com/download/share/snom200-2.04o-SIP.bin I am using asterisk stable tree. I had to disable "Challenge Response on Phone" on my snom; I could not get it to work with

Check the Redirection on the web interface of your Snom 200. If it says "When Busy" that's your problem. It should say "Never". Also make sure on Sip->Lines your line appearance says "All" or else you will have the same problem. Hope this helps :) Greg Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original

Does someone know coincidentally the cause for the error message specified in the Subject? The following scenario: Snom 360 behind one rout (wiederrum on a DSL line with static IP address hangs). The Snom has a private IP, routs accomplishes NAT. STUN and ICE are activated, as SIP haven 5060/udp are firmly used. Detailed packages passed on on haven 5060/udp of rout to the Snom. The telephone

With a recent update to Asterisk CVS, and versions 2.02r and t of the Snom 200 firmware, I'm getting the Snom phones stuck reporting "Busy.": -- Got SIP response 486 "Busy Here" back from 10.12.34.248 -- SIP/3064-b07d is busy They're on-hook, not doing anything. They are registered fine. I can pick them up and call out over Zap or IAX fine. I just

I'm using sipsak to send messages to Snoms in my subnet. At work, works fine: sipsak -M -O desktop -B "foo" -s sip:1001@192.168.1.220 -H 192.168.1.46 displays "foo" on the Snom display On my home LAN (AAH 1.5, Snom 190 3.60s, switched 100, no VLAN, no routing) the same command (modified for my LAN) always yields: (type: 3, code: 3): from 192.168.171.8 at the console

Thought I might just as well share these scripts, they may work with other phones too: ######################################################################## *1)* Dialing from the KDE 3.5.5 address book works with a script that gets triggered from the kaddressbook (Settings - Script Hooks - Phone) with my command snom_dial_number %N The script snom_dial_number itself goes like this:

Hi, Snom phones firmware 5.0 is now out. Try it if you like: http://www.snom.com/wiki/index.php/Main_Page. Regards, --------------------------------------------------------------------- Usman Tahir snom technology AG www.snom.com --------------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I'm attempting to get Asterisk running for the first time in my company. As I've never used it before, I am creating a small testbed with which to learn Asterisk and get the kinks worked out before attempting to roll it out. I have * compiled and running, and built the sample config files as suggested by the Wiki. I got my Snom 190 configured to use DHCP, and have created an

Hello. I've been going through the archives, but can't discern the state or future direction of IAX on the SNOM100. The most recent image appears to be from September 2002. There was a message on this list stating that SNOM was coming to visit Digium last April with the intention of adding IAX support themselves. For a while there was reference to the I100E on the asterisk and/or

Hello. I'm currently evaluating the Sipura SPA-841, and snom 190 phones for use in an Asterisk PBX/call center environment. One feature the SPA-841 has, which I can't figure out how to implement on the snom 190, is the "make/accept calls without registration" feature. Or more specifically, "produce a dial tone even if I'm not registered." I would like to set our

Please forgive me if this is a silly question. I've been following this thread in the hope that I could put my * server and snom 200 into full-time service very soon. I need to find out how to have the lines configured so that it does not return a busy reply when only one call instances is engaged. Am I supposed to create multiple extensions on my asterisk dialplan to reflect the 5 call

that is *very* cool. However, I am somewhat concerned about being forced to license the firmware (even if it is free) can you comment for the list the rationale behind forcing a license and how this might affect Snom users who, say, want to DOWN grade their firmware? ps is there a timetable for supported, formally released firmware version? -----Original Message----- From: Hirosh Dabui