Displaying 20 results from an estimated 4000 matches similar to: "DID problem with calls from analog to ISDN"
2005 Sep 12
1
chan_zap.c:8050 pri_dchannel: Ring requested on unconfigured channel 255/255 span 2
I have a serious problem that repeats very often, after 30 - 50 calls
and I can only solve it by stopped and restarting * :-(
After a while, * seems to loose track of something. When an ISDN call
from PBX needs to go to the Telco, I get
'Ring requested on unconfigured channel 255/255 span 2'
It's always channel 255/255 ??, the 'span' number is random
Setup:
* between Local
2004 May 07
2
quadBRI & ISDN telephone
Hello,
We have a quadBRI in NT mode with bri_cpe_ptmp signalling and when connect a
ISDN telephone to this nothings happen.
What can I do?
My config files are this:
Zaptel.conf:
loadzone=es
defaultzone=es
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,1,3,ccs,ami
span=3,1,3,ccs,ami
span=4,1,3,ccs,ami
bchan=1,2
dchan=3
2004 May 18
1
Problem with QuadBRI
- I'm not a Linux user i'm trying to get in it ...
- Fedora core 1
- QuadBRI card bought from junghanns.net
- We want to use the card in TE mode to connect to the TELCO
- Downloaded BRISTUFF0.0.2(stable) latest from junghanss.net/asterisk
- followed the instructions on voip-info.org
- compiled everything still got the error when "make load" in qozap :
insmod ./qozap.o
2009 Dec 11
0
zttool don't show NT mode with OctoBRI
Hi,
Using Xorcom's bristuff-0.4.0-RC4-xr7.tar.gz (ie asterisk 1.4.25) with an
old Junghanns OctoBRI (ie not the 2.0 version), zttool shows every port in
TE mode, though half of them are in NT. Alarm column shows OK for every
port, such as :
OK octoBRI PCI ISDN Card 1 Span 1 [TE] Lay
Globally, this system doesn't work (can't dial out through zaptel)
Replacing this board
2010 Apr 10
2
t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED
Hi everyone.
We have a problem here... Hope somebody can give us some hints.
We have a HP ProLiant DL180 G6 Server with a Debian/Lenny sytem.
Asterisk 1.4.21.2 (1.4.21.2~dfsg-3+lenny1) with zaptel (1.4.11) and
libpri (1.4.3) is installed.
There is a QuadBRI-Card installed:
# lspci -vv -s 06:04.0
06:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
2005 Sep 23
1
zaphfc problem: overlapdial don't work after update bristuff
hello,
I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a
Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and
zaphfc driver - point2point mode -.
---------
| TELCO |
| BRI |
---------
|
| PBX external S0
--------
| PBX |
--------
| PBX internal P2P S0 NT Mode
|
| HFC-S Card P2P TE Mode
2005 Mar 28
1
Connecting quadbri to EuroISDN with 2 TE and 2 NT ports - what cables and settings ?
Hi,
I'm trying to connect quadbri between powered ISDN phone and ISDN line:
ISDN <---1---> TE - * - NT <--2--> Phone
I use quadbri, suse 9.2 and latest 0.2.0-RC7k bristuff. I've used sample
settings provided with package, but do get strange error (I think that I
have wrong setting for P2P or P2MP setting and cables 1 and 2).
If I connect phone to ISDN with straight cable
2005 Aug 23
0
[Asterisk-Dev] Severe ISDN signal distortion in CVS-HEAD with octoBRI
BUG/SYMPTOMS:
1.Under certain circumstances, octoBRI (and most likely quadBRI) ISDN
cards (Junghanns/CologneChip) severely distort certain ISDN payload.
2.Although these claims relate to the bristuff patch, the problem might
not be limited to bristuff and in fact be rather asterisk/zaptel/libpri
related.
3.Signal distortion is limited to the use of the CVS version of the
Bristuff patch for
2006 Oct 27
2
ISDN-BRI issue
Hello all
Asterisk 1.2.10
BRIstuff PRE-1s
Debian sarge
I have an issue with my ISDN-BRI line. Asterisk tells me my D-Channel is
down, no matter is I have an actual line plugged in or not.
== Primary D-Channel on span 1 down
I somehow got it to work once! The config tools do not indicate any
errors whatsoever. Here is a rundown of various listings I can think
about. (some things may show
2004 Jul 06
1
zaphfc 2 cards working with P2P Mode ?? - massive Problems
Hello List,
is someone operating a DID /P2P / Anlagenanschluss with more than one
HFC-Based ISDN-Card ???
I have now 12 hours of setup-troubles behind me with Colt-Telekom, where
we did not get it working with two HFC-based cards.
Here the setup:
- 2 HFC-ISDN-Cards (the one from Conrad-Electronic)
- bri-stuff.0.0.2 (with the asterisk-sources from the
download.sh-skript)
- two NTBAs from
2005 Jul 25
3
Should this work?
Hello
I am using a Junghans quadBRI ISDN card and it is loaded and working. In Asterisk if I connect to ISDN line it is detected and tells me so.
In my zapata.conf I have (abbreviated):
[channels]
switchtype=euroisdn
signalling = bri_cpe
context=default
group=1
channel => 1-2
;plus group 2 - 4
zaptel.conf:
loadzone=uk
defaultzone=uk
# qozap span definitions
# most of the values should
2005 Mar 11
1
QuadBRI ,TDM400 and SuSE9.2 (Sencond try)
Hi all, this time with the complete configuration files...
We need help with our SuSe9.2 asterisk box
We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone.
We have downloaded the bristuff (0.2.0-RC7j) and installed it without
problems.
once we downloaded and compiled asterisk, zaptel and all other stuff,
the module installation succed in this order:
modprobe zaptel
modprobe qozap
2006 Jan 06
1
Problem with integrating ISDN PBX using NT mode
Hi,
I'm just in the process of replacing a crappy Siemens PBX with a new and
shiny Asterisk system. To connect Legacy equipment I hooked up a small
ISDN PBX (DeTeWe OpenCom 36) to one port on a Junghanns.net quadBRI
card. That port is configured for NT Point to Multipoint
(Mehrgeraeteanschluss) mode. Now I can place calls from the ISDN PBX to
the other Asterisk extensions but the other way
2005 Oct 07
1
Echo cancel on HFC-S cards and CIDNum setting on outgoing calls
hi all!
I'm running an Asterisk-box with bristuff-....RC8n and 2 HFC-S cards.
I m located in Vienna/Austria. I have the problem that on outgoing
calls i hear my voice as a short echo (about half a second). This
occurs not on every call.
I tried some changes in my zapata.conf, with rxgain and txgain
settings, but to me its
hard to find a configuration which is good for every call i make. Is
2007 May 14
0
quadbri and bristuff : no answer to isdn setup message
Hi,
I'm trying to install a Junghanns quadbri for a few days but i stay with an
asterisk error. (Everyone is busy/congested )
Asterisk is working with a Fritz PCbut from one year and now i want to add
the quadbri.
The quadbri card has been configured in NT mode and with no 100 ohms S/T
termoination. (I'm not sure if the S/T parameter is correct)
I have installed the bristuff package
2005 Aug 15
1
bristuff-0.2.0-RC8n problems and kernel panic
Hi list!
On a newly installed RHEL 4 box I'm trying to install bristuff-0.2.0-RC8n.
Everything did compile but I am running into some problems with the zaphfc
driver.
First of all when I load zaphfc *before* zaptel (yes I know I shouldn't do
that) I get a kernel panic and the box hangs. Not so nice, especially when
you are trying to fix stuff from remote locations. But ok.
Now for
2006 Jan 31
1
Asterisk 1.2.1 + TDM400P + fax machine unreliable ?
Hi,
I have a running asterisk 1.2.1 (bristuffed) with a TDM400 Board. Connected
to 1 port is am ordanary Fax Machine. Everything 'seems' to work,
however receiving faxes is very unreliable.
Sometimes I receive a normal page, without problems. Sometimes
half of a page and the rest is scrambled, but most often, I receive
nothing and the other site reports a Fax error...
The Fax machine
2006 Mar 16
0
qozap drops -- possible to bridge BRIstuff ISDN to analog zaptel phone?
Hi all,
Using Asterisk 1.0.10-BRIstuffed-0.2.0-RC8q
with a Junghanns quadBRI (2 spans connected) and a Digium TDM400 for
extensions
Shouuld I be worried about these lines that keep showing up in my
/var/log/messages?
qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116
qozap: dropped audio card 1 cardid 0 bytes 6 z1 50 z2 28
qozap: dropped audio card 1 cardid 0 bytes 6 z1 59 z2 37
..
....
2006 Oct 16
1
ZapHFC & quadBRI D-Channel going down randomly
Hi.
I'm running some asterisk boxes on different sites,
some equipped with a couple of ZapHFC cards, others with
Junghanns quadBRI cards.
All boxes were compiled with Asterisk 1.2.10 (libpri 1.2.3 zaptel 1.2.6)
and bristuff 0.3.0 pre 1s, distribution is Fedora Core 4 with
kernel 2.6.17.3
The cards are connected to Telecom Italia's NT1/NT1+ S/T lines;
some of them are point-to-point,
2006 Jan 25
1
ISDN D-channel disconnects for a minute every 5 minutes
I have a problem with Asterisk-bristuffed using a zaphfc card.
I am located in the Netherlands, so I have an ISDN line from KPN. When I
start Asterisk, and plug in the ISDN line, everything works perfectly for
about 5 minutes. And then the ISDN line is down for 1 minute, and after that
minute, the line comes back up and works for another 5 minutes. Every time
the line goes down I get the error