similar to: [ANNOUNCE] chan_capi-cm-0.6 released

Hi all, I would like to announce the first release of the chan_capi channel driver on sourceforge.net The package is available for download with name chan_capi-cm-0.5 and is the current CVS HEAD. It is derived from the chan_capi-0.4.0PRE1 of kapejod. The main changes are: - complete rework - fix race-conditions - fix call state handling - rework of debug/verbose messages - added capiFax

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi i've installed asterisk by last cvs and i note res_parking.c is not anymore there; chan_capi-0.3.4b INSTALL file require: in /etc/asterisk/modules.conf insert the line: load => res_parking.so load => chan_capi.so running asterisk i get: [app_capiCD.so]Jul 21 15:32:26 WARNING[1076988448]: loader.c:242 ast_load_resource:

Hi I use RH 9 + asterisk v1.0 stable + 2 PCI fritz cards + chan_capi 3.5 and it works fine, Since my users want fax fonctionnality and customers know 1 of the msm as fax number I wanted to try the chan_capi-0.3.5 patch if I patch chan_capi and run make, I get an error message , as you can read below, orginal chan_capi compile works, when patched I get an error, no CID ? Any idea ? anybody

Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I

Hello Armin, hello List I'm trying to get chan_capi working with asterisk from debian stable (asterisk 1.0.7, the debian version number is 1:1.0.7.dfsg.1-2). I managed to get it compiled by providing my own version of ast_copy_string. This is an Austrian PTP line. I can do outgoing calls fine (no comprehensive tests yet). For incoming calls, I'm getting "No answer" on the

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

Dear list, I tried to install the CAPI support RPM from the SUSE 9.2 disks. YaST tells me it is happy with the process. The Asterisk release I am using is the one that comes packaged in RPM format, also included in the distribution. Still starting asterisk with the usual asterisk -vvvc I see that something goes wrong. [app_capiCD.so]Dec 23 19:21:45 WARNING[1076850816]: loader.c:242

Hi chan_capi users, this thing is awesome, no delays like in modem_i4l! Plus, it got those nice ISDN features. Here's my question: Does my service provider (Deutsche Telekom) have to provide me with these Services (CD, ECT)? (the Readme in 0.2.5 says "does not relay on service CD") I know, that I don't have CFU,CFNR,CFBS (which I would have to order seperately). How likely

Hi, the following szenario leads to a problem: I connect an CAPI channel to an AGI-Script per Manager API. This Agi script starts the MeetMe-Application. The Person on the Capi Channel is now able to speak with the other conferess in the MeetMe-Room. But if the CAPI channel hangs up, the busy tone is streamed into the MeetMe Room for several seconds, until the CAPI HANGUP-Signal is finally

Hi, I've recently reinstalled a Diva in my asterisk server (alongside a QuadBRI :-) to test the nice features Armin has been adding in chan_capi. The capi.conf format has changed, so my question is how do I define a deflect= statement for different incoming MSN's? I've tried to define a section for each (group of) MSN with a different "deflect". Is that correct? [DIVA1]

Dear asterisk users! I want to control a hardware pbx with asterisk. What I need to do this is being able to press "hold" which can be done with capicommand(hold) and then send digits on a bri card which connects to my asterisk computer. So far I use Dial(CAPI/ISDN1/27:<<digits>>/bo,15) to do this. Are there better ways? Note that these are not dtmf, I'm afraid. I use

Ok I know this may have been covered and I did have a look back in the archives but didn't find anthing so I am asking it now.. Many moons ago the MySQL CDR functions and MySQL Voicemail functions had to be removed from the main asterisk code because of licensing issues.. Now there is new MySQL stuff like MySQL FRIENDS for SIP and IAX definitions.. So how is it that these options

Hello, These are error messages I get when I try to call a number over CAPI channel. -- Executing SetCallerID("SIP/xlite1-3b80", "0") in new stack -- Executing Dial("SIP/xlite1-3b80", "CAPI/hfcpci/b17") in new stack > data = hfcpci/b17 > capi request for interface 'hfcpci' == hfcpci: Call CAPI/hfcpci/b17-1 (pres=0x00,

Hi, Since Carl has kindly provided us with fax support for CAPI based cards, we have been using it with much success. Today I have modified app_capiFax so that it now supports a dynamic CSID. The following example uses the DNID created by chan_capi on an AVM Fritz! card. * Receive a fax with CAPI API. * Usage : capiAnswerFax2(path_output_file.SFF|stationID) * * This function can be

Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to

I have a problem receving calls via the ISDN line, using the followin components Asterisk 1.0.9 with asterisk@home chan_capi-cm-0.6 AVM Fritz card datalink protocol = point to multimode I can make calls out with no problems so the issue is only incoming calls. When I make the call from an external line to the ISDN line connected to asterisk, I get a busy signal after about 5 seconds. I have

I had unexpected hangups from my asterix box using the i4l driver. (SIP <-> SIP calls worked execellent, but SIP<->ISDN didn't.) Then I changed the i4l driver in modem.conf with the chan_capi from jungham. (http://www.junghanns.net/asterisk) I followed his instructions in the INSTALL file, and first encountered some errors compiling it. It help by deinstalling several

Hello, I'm trying to use the version 0.6 of chan_capi-cm for outgoing calls it works perfectly but for incoming calls it doesn't work. I tried to set an extension to dial my from-pstn context and it works. So I think there's a problem with my capi.conf or something... Here's a debug when calling -- CONNECT_IND (PLCI=0x101,DID=9100,CID=46720XXXX,CIP=0x4,CONTROLLER=0x1)

Hi all, on sourceforge.net I added the fixup release 0.5.4 of chan_capi-cm driver. The changes from 0.5.3 to 0.5.4 are: - fixed 'group' setting according to Asterisk defaults. - use SetCallerPres(prohib_not_screened) instead of CallingPres(32) for CLIR. - full CallingPres support added. - use mutex when debug/verbose messages are printed. - set dnid on incoming call. - catch errors in

Hello all, i am using * 1.0.9 and chan_capi-cm 0.5.4. So far everything works good. But if i want to initiate an call over an capi channel either from the manager api or from an call file * quits with an segfault. If i do the same thing over sip channels everything works perfectly. Had anyone the same problem? I am using Linux Kernel 2.4.27 and an Fritz!PCI v2.0 Card. Thx in advance :)