similar to: Orinoco Injectors

I'm trying to spec out hardware for a new office, and I'd like to include power over Ethernet as an option. I've seen a handful of PoE injectors around $1000 for 24 ports and a couple switches up around $2500 for 24 ports. Are there any cheaper options, short of buying a boatload of 1-port injectors off of ebay? I don't really need more then 24 ports of PoE out of 48 total

Hi, Do you need a special cable and power for that unit or you can run it of PoE Switch? Thanks. robert

Hi I have a fresh install or Centos 4.2 with a orinoco silver pcmicia wireless card with a Yenta socket pci-pcmcia bridge. Cent0S no found any device. How I configure it ? If I type: modprobe yenta_socke modprobe orinoco These modules loads but not works. (This card works with Slackware and Ubuntu with a default install) Any help ? roberto -- Ing. Roberto Pereyra ContenidosOnline

I have a 501 with traditional power and a 301 with PoE. I rightfully assumed that the traditional power from the 501 would work on the 301. How do I get the PoE to work? Do I use the Polycom PoE cable in addition to whatever PoE injection method I use? I have a Cisco PoE injector that works on my Cisco AP350 and my 7960. No combination of this injector, the Polycom cable, and the phone result in

I need to connect up to sixteen phones per building, I can use a cheap hub, but POE would be useful. Is there a cheap POE hub available? Everything I have seen has been expensive. Chris Mason

Hi there, In Cisco web site http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008884a.html It says that regardless of the technology used you have to buy a licencse. Does the license apply to use the phone with asterisk, or, can i just buy the phone? Also, the phone does not requiere to use an AC adapter if used with PoE injectors/switches. Can non-Cisco PoE

Based on several threads I've read on this list, I assume that it would be handy to supply POE (power over ethernet) in an environment without having to purchase POE switches (assumed expensive) and abandon one's existing (familiar/custom/not-yet-expensed/etc.) switches/hubs. Assume I have a non-POE switch with 24 RJ-45 (ethernet) ports. I design a 1U box that can be mounted just

Hello; We have a cisco switches but they are not PoE and we need only to have PoE device so the cables come for it first to provide the power and then goes to the switch (to be like batch panel), is there something like this that can be used for the IP Phones? Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL:

Sorry I dont have any answers, however I do have a question. I was told that ISDN-30 lines do not work during power failure. Can anyone with some better knowledge confirm or deny this? Is this because the ISDN-30 box on the wall requires power (and Telco providers just dont hook them into UPS as standard)? Or do they mean if your local circuit has lost power so will the local digital exchange

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

I've tried to use a Cisco power injector to supply power over Ethernet to a GXP2000 phone without success. Although when I plugged these phone to a PoE capable Cisco Switch it worked without a problem! Knowing that all these three equipments implement IEEE 802.3af protocol, why doesn't it work with the Cisco power injector? Anyone also had this problem before? Thanks, Ricardo Carvalho.

I'm looking for 24 or 48 port IEEE802.3af POE injector. Any recommendation? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/3886655b/attachment.htm

Is anyone using a 3com 3CNJPSE to power a 7960G? I have a couple of 7960Gs and 3CNJPSEs but no combination appears to work. Both phones work fine with a cisco power cube. I get a 47.6V reading across pins 5 and 8 on the patch cable coming from the 3CNJPSE. The network still works through the 3CNJPSE, just no power to the phone until I connect the power cube. Using two straight through wired

I am looking at phones for my asterisk system and seem to have a problem. The only Power over Ethernet phones I can find that support the IEEE standard are 3com. Cisco uses its own proprietary ( and is expensive to boot ), snom has a different but equally non-IEEE method, and i'm havent found another phone that I'm confident can do the job for our office. Whats a good high quality ip

Hi, folks: I just took delivery of new PoE cables (PN 2200-11077-002) for our Polycom phones here in the office. I have the following to report, for the erudition of existing Polycom users and those considering purchasing Polycom sets from the set of models noted in the subject: 1. The cables do indeed work (hooray). 2. The cable has a module on it about a third of the way from a female end.

Hello All, I have a Dell C800 laptop which boots and runs wonderfully with centos 4.4 except for the wireless card.. The card works fine with other OS'es but not centos.. I have read a ton of postings in various places about conflicts with orinoco_cs and host_ap, etc etc.. I have tried to add blacklist entries to /etc/hotplug/blacklist, I have tried changing the alias in

Hello guys, I try to install this card in linux redhat 6.2 (kernel 2.2.14), in a new Compaq PC. In win98 it work nice, in linux, the drivers (and pcmcia) compile and install well , but when redhat boot, and start "pcmcia", the pc hang... What happened? sorry for my english. -- Best regards, fabian mailto:fabian@catamarca.rffdc.edu.ar

Ok, not exactly an Asterisk problem, but... I picked up some SNOM 200 phones because SNOM's have been recommended for use with Asterisk and they have line buttons that can subscribe to presence. However, they don't appear to power up when connected to my Negear FS108P, which is an 802.3af Power-over-ethernet capable hub. I am pretty sure these are the SNOM 200b, in that the ethernet

Hello, I am trying to set up some Cisco 7940G phones with the 3com POE injectors. I have the 3CNJPSE24 power injector, this is the rackmountable 24 port injector. My question is does anyone know how to serial console into these things? I have tried just about every cable setup I can think of and baud rates but I can't seem to get anything out of it. I want to check to see what certain

Hey guys, I was wondering what POE solutions are being used ? Ive done some searching on google and found that PowerDsine seems to be good brand. Any comments,suggestions, and experiences on POE hubs other POE products would be greatly appreciated. Thank you, Steve Maroney