similar to: Sipura 2k voice quality

Hi. I'm using Debian's 1.6.2.0 version of asterisk and trying to get an understanding of bridging two lines together. I've seen the documentian on the bridge command but a good example would probably help me more. At the moment we have a number of SIP lines, one DAHDI line, and an IAX2 line that incoming calls can originate from. All the local phones are SIP. What I would like

Hi. I've got a working dial plan on my home system but there are problems with it and I was hoping someone more comfortable with dial plans might be able to help. In a nutshell here's what I'm currently doing on an incoming outside phone call [default] Set(TIMEOUT(digit)=3 Set(TIMEOUT(response)=60 exten => s,1,NoOp(Answering in default context) exten =>

I have two asterisk servers. One is at location 1 and the other is at location 2. What I am trying to do seems straightforward. I want the Asterisk server at location 2 to send all it outbound calls to the Asterisk Server at location 1. Both asterisk servers can dial each other using extensions without a problem, but when users on Asterisk server 2, dial 9XXX-XXX-XXXX the call never reaches

Hi, Where can I find doc related to IMAP storage. Usually, config options can be found either in voicemail.conf or voip-info.org but almost none relates to IMAP configuration. At the moment, I'm looking for data related to imapflags possible values. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Greetings, I have a Sipura SPA-1001. When I make outgoing calls, I have very jittery sound. Incoming calls work fine. This wasn't the case a few months ago, I am running head as of yesterday. Any suggestions? Thanks, Erik

Hi list, Well I really didn't want to see things get to this point, but Sherman at Sipura along with their President Jan F. leave me no other choice. SIPURA has been provided a letter from our attorney for Breach of Contract and damages. They have yet to respond. A quick background. 1. Sherman (SIPURA's Director of Marketing), stated that we would do a join press release for the Oct

Hello List, I've spent the last day trying to find information on how to call multiple sip phones and have them all answer so I page everbody. When I use Dial( ext&ext&ext... ) the first phone that answers gets the page, but none of the others do. Is there a way to get around this? TIA, Steve

If this has been covered before - I appologize. We use some Sipura SPA-2000's with the g711 codec and all seems fine (except for the occasional failure to register errors in my asterisk logs - but I will save that for another post). g711 call quality is on par with our Cisco 7960's. However, when using the g729 codec, the call quality on the Sipura device goes downhill on the PSTN side

Back in January I started having a problem with my Sipura (and there was at least one other on the list with the same problem) that if I answer an incoming call (via X100P) on line 1 of my Sipura, the caller cannot hear any voice from the internal extension. If the internal user puts the external user on hold (via flash hook) and returns, both directions of audio are fine. Line 2 never has

Hi, I am unable to log into samba anymore since I upgraded to 2.0.3. I've attached my smb.conf below and I've even gone to trying the CVS releases to see if one of them will help. First of all, I get soemthing like {33}: smbclient -L vilnius -U mharrell Added interface ip=207.97.105.146 bcast=207.97.105.255 nmask=255.255.255.128 Password: session setup failed: ERRSRV

I'm struggling to get my VOIP installation to be acceptable. I'm looking for advice on what else I can look for. My system: o Teliax VOIP service, voip-ny1 proxy o RCN Cable Internet Service (3Mbps download, 500kbps upload, 6ms average jitter) o 3.2 GHZ P4 Server (runs asterisk, firewall, other stuff) o server lightly loaded o Linux kernel 2.6.19.2 o Shorewall Firewall software with

Anyone have experience with Sipura's? Anyone know if they offer a warranty? Would like opinions on these, good or flame. We bought *one* to test with and it died, can't even get a response from Sipura "support". Could anyone recommend another device to replace these? Prefer 1 or 2 port design. Ty :-)

In our experience, the total cost of softphones(money, reduced sound quality and lower reliability) in a large call center environment is actually greater over time than the cost of a channelbank and cheap analog headphones. We've tried 2 softphones, 2 kinds of SIP VOIP hardphones, 2 kinds of SIP analog adapters and we've tried channelbanks over the last 3 years. Right now we are half done

On Tuesday 10 May 2005 9:45 am, David Masure wrote: > Hi folks ! > > I bought two sipura 841 phones. I used to have GN Netcom headset which > I connect instead of the handset. The problem is that I don't have any > sound coming out the headset and I can't speak neither ! > ... > > Or....can anyone advise me on headset working with the sipura 841 ? I just use a

Hi all, The problem is on the volume of the voice sent by the SPA-841. I think the echo cancel algorithm sets a limit to the microphone when detects sounds or noise from the earphone. This problem generates an oscillation on the voice volume sent by the phone and even turns it off completely for very little lapses of time making the communication very uncomfortable. I manage three different

Group, Just want to share with the group my recent findings regarding CODECs/Vocoders and the effect it has had on voice quality and the intermittent noise and breakup problem I have which I mentioned in a previous emailing with the u-law CODEC. Calls again are placed through a SIP phone to a TDM400P to the PSTN. A good reference on the reasoning behind the selection of a CODEC was found in the

Why is www.secnet.com down ? i'm looking for the samba-audit-tool and didn't find any mirror. Thomas On Fri, 30 Apr 1999 samba@samba.org wrote: > SAMBA Digest 2073 > > For information on unsubscribing see http://samba.org/listproc/ > Topics covered in this issue include: > > 1) Group-Shares > by Johannes Scherbaum <scherj@funkhaus.de> >

Except that mixmonitor still has a bug in it. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin P. Fleming Sent: Wednesday, April 12, 2006 11:45 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] call center running Asterisk -sound quality-critical! Matt Roth

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able to pick IVR items with DTMF reliably. The

Hi, I am using Debian OS kernel 2.6.22-3-amd64 and zaptel driver 1.4 with ztdummy module for meetme application. I use meetme with SIP channels. I have such problem that when one connects to the conference voice is "cut". Each voice sequence is disturbed. Does any one have similar issue and could give me some advice?? my extension.conf for meetme: ;switch =>