Displaying 20 results from an estimated 3000 matches similar to: "MAX PRI for single server (was:Not enoughlinesavailable for Asterisk implemetation)"
2005 Sep 08
1
MAX PRI for single server (was: Not enoughlinesavailable for Asterisk implemetation)
If you are looking for real high density VOIP termination I would look
at
> something like a Lucent APX 8000, configure correctly it can pass
2500+
> g.729 calls to the PSTN course we paid lots of $ for ours.
>
> Chris
>
Chris,
My experience has been that the APX and TNT products require a single
SIP proxy, how are you load balancing 2500 calls?
If all of the traffic is
2005 Jun 22
1
OT: MAX TNT and PRI calling name (CNAM) facility message
Does anyone have a MAX/APX with working ingress PRI calling name?
I recently acquired a MAX TNT on the cheap and it's integrating fine
except for one thing. In the 11.0.0 release notes, it is stated that
ISDN calling name will, if present and permitted by presentation
flags, be added to the From: and Remote-Party-ID: headers of the
INVITE. I'm not able to make this happen. Pcap
2005 Aug 19
4
any ISDN/PRI signaling experts out there?
I have officially engaged in a pissing contest with the local Telco over
PRI calling name delivery.
The telco publishes their calling name delivery over PRI feature as
being bellcore gr-1367-core compliant.
The gr-1367-core spec states that the calling name is to be included as
a facility IE in the setup message, or sent in a subsequent facility IE
message with an indicator in the setup message
2010 Jun 24
2
T.38 on a MAX/Lucent/Ascend TNT
Hello folks,
I've been trying to get T.38 over SIP working with calls terminated by a
MAX/Lucent/Ascent TNT. As far as I can tell, SIP and T.38 are actually
working perfectly; however, I can't get the TNT to properly terminate a
FAX call. Does anyone have a working configuration for SIP and T.38 for
calls from a TNT or APX?
Here's a brief description/diagram of my test setup:
2003 Aug 14
0
Twisted Idea
Ok, this is probably an incomplete thought, but over the last few weeks of
reading this list, I think I'm ready to start designing my system, and would
like to solicit input.
Currently, I have 2 POPs, one each in 2 different states. Each has a Lucent
TNT w/~400 trunks. Each TNT has the capability to provision a PRI that can
be piped into an * system.
So, my interface to the PSTN is
2005 Sep 08
6
Not enough lines available for Asterisk implemetation
Hi all
I am looking at implementing asterisk at a company with two ISDN bricks (60
lines). I know that the VoIP will absorb at least on brick worth of lines but
that still leaves me with a need for 30 ISDN lines. As far as I can tell most
of the Digicom cards have 4 FXS ports and I've read on this list that at most
two could coincide in a box simultaneously without causing an interupt
2006 May 01
12
CallerID Name problem
I'm having trouble getting callerid name to show up on my phones (Cisco
7960 and a few softphones)
When I look in the CDR database I see the name but not on any phone when
being called.
I'm running
Asterisk SVN-trunk-r7498 built on 2006-04-30 15:11:39 UTC
Any help would be great !
2004 Dec 25
1
Asterisk and Lucent APX8100 Universal Gateway
we're evaluating the use of a Lucent APX8100 E3/SS7 to SIP gateway for use
in conjunction with asterisk, serving something like 4000+ lines. does
anyone have experience with the APX8100 and it's integration with SIP on
asterisk ? does the APX8100 handle SS7<->SIP signalling well enough to be
used ? any anecdotes would be well appreciated.
--
Regards,
2006 Nov 02
1
Lucent TNT Help
I'm looking for someone familiar with setting up some of the more
advanced features of the Lucent TNT, preferably someone with knowledge
of Trunk Groups and choosing outgoing PRI channels based on call type
and perhaps NPA-NXX
We currently have 8 PRI's. 7 of them are for our dialup pool, the 8th
is for our voip. We currently run the dialup PRI's to a seperate TNT
We want to
2005 Jun 28
3
Asterisk with Lucent TNT echo
I'm running SIP between my Lucent TNT acting as a gateway, and an
asterisk server. We have a PRI coming into the Lucent. Basically the
problem I'm having is mostly on inbound calls but some outbound calls as
well. I hear echo and sometimes some weird artifacting on calls coming
in from the lucent. Everything routed over IAX to VoIP Jet or Nufone
sounds fine. It seems like every 3
2006 Feb 14
3
Fax to Email with Asterisk and Lucent TNT
Hello,
I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like
to be able to direct an inbound fax call into my TNT, have it answer
the fax and send the image file over to Asterisk, or some other
system to deliver to an e-mail address(s). I'm not sure if I need
Asterisk to any of the call control or not. I'd also like to setup a
print queue and have outbound
2006 Nov 07
3
Asterisk and Max TNT Passing calls SIP to PRI, not PRI to SIP Authentication Issue
Hi All,
I have a lab setup with two asterisk servers and a MAX TNT in the
middle like this:
asterisk sip >< sip TNT pri >< pri asterisk
The TNT is running 11.0.6 and the asterisk servers are running
1.2.9.1. I can get calls to pass from asterisk sip to tnt to pri to
asterisk but not the other way. The call from asterisk to pri to tnt
is good, the TNT is passing SIP invite to the
2007 Mar 30
0
Re: Lucent TNT - ring timer
> I've got a Lucent TNT that I'm using for a gateway. Its working fine, but I
> have one problem. I cannot find any place to set a ring timer, or number of
> rings. The calls seem to timeout (Goes to all circuits busy) after about 15
> seconds - which isn't enough time for some voicemail boxes to pickup. I
> found a setting called ringing-timer under sip-options, but
2004 Nov 24
0
H323-Asterisk-SIP-TNT consultant needed
We are in urgent need of some help getting Asterisk to gateway between an
incoming H323 connection and SIP to a Lucent TNT. We have the incoming
H323 already set up and the SIP going to the TNT but the media stream is
getting lost somewhere as no audio is heard. We are willing to pay $$$ for
an extra set of eyes to get this resolved fast. It's probably something
quick and easy and we are just
2005 Aug 09
1
inbound caller id name pri - tnt - asterisk
Anyone out there have success getting caller id name from a pri, through
a lucent tnt, to asterisk?
What about from other media gateways?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050809/d3f02c3d/attachment.htm
2004 Dec 13
1
DS3 Media Gateway
Is anyone using a media gateway with a DS3 for TDM/PSTN access? I am
trying to determine the best way to scale Asterisk beyond 4 PRI's.
What about the TNT Max? Can it be configured with a DS3 PSTN interface,
the appropriate software and hardware, and Ethernet ports to support
SIP-PSTN/DS3 media gateway services for multiple * boxes?
What about TNT - SER - * ?
Is there anyone here with real
2005 Aug 30
2
Wierd Problem
Hi All
I have posted this problem many times on the list but
no reply, trying one more time may be someone will
response this time
When I call from 1 RTC Client to another without
Asterisk everything use to be fine but when asterisk
is there as a Registrar a problem use to occur in more
than 90% calls, Caller can hear the voice of the
receiving side
but the receiver cant be able to hear the
2007 Oct 23
2
Data calls through TDM2400E
Hello. Has anyone been able to successfully make data (dialup modem) calls
through a TDM2400E? We're able to make fax and credit card calls fine, but
cannot successfully make modem calls using a 56K modem connected to a patch
panel connected to an FXS port which then gets bridged to an FXO port
connected directly to a phone line. We have 'echocancelwhenbridged=no' set
in
2003 Nov 19
2
PSTN intercepted announcement
Hi,
I have asterisk functioning as SIP to H.323 gateway for local SIP endpoints and I have H.323 to PSTN
gateway (Lucent MAX TNT) connecting my LAN VOIP to PSTN via PRI.
Everything works fine with one exception. I seem to be unable to figure out why I cannot hear
PSTN intercepted announcement ("number is not in service" etc.) when I'm calling
a disconnected number through
2005 Aug 25
1
OT: Are you using a Lucent?
Is anyone out there using Lucent brand equipment to handle an incomming
DS3, converting all 672 calls to SIP (as G729) and sending those to
Asterisk/SER over ethernet?
If you are and are willing to speak to my boss about your experiences
(over the phone) with it, please contact me off list.
We have a possible contract with a local CLEC to handle their long
distance, and they want to send to