similar to: Asterisk@home with Eyebeam

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

Hi all, I would like to connect in sip mode an Eyebeam client to a messenger via Asterisk. I want to use video. Nat is not an issue as vpn connections will be used. Is this a difficult tasks, can someone give me some pointers to get started... Have a good week-end, Francois Random Thought: --------------- Wanna buy a duck?

Hi all, I have Asterisk talking to my call manager 4.0 with SIP trunk as mentioned in the wiki. I also have SER talking to Asterisk. I need the SER talking to my Call manager. The reason why CCM cannot talk to SER is because SER is a on a public ip address, and CCM is on a private ip address. The asterisk how ever has 2 nics, which talks to both and external. Is it possible to allow

Lets presume that my both software are open. Xlute and Eyebeam But I want my calls from Asterisk to land only on Eyebeam and Not on xlite. How to set it ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090129/4011be6c/attachment.htm

Hi All, So I've been exploring the use of G.722 encoded wideband audio recently. I have three different SIP devices that allow this: Eyebeam, IP650 and a Siemens S865IP. The Siemens and IP650 seems to work fine together. Calls pass between them in what the Polycom notes as "HD" mode and the audio quality is certainly very good. However, things are not so easy with Eyebeam and the

Hi, I'm trying to find how to configure Asterisk 1.2.7.1 to allow two EyeBeam (3015c) to send Instant Messages between them... But I cannot find anything that explains how to do it! Anybody as a clue? is it possible? Now, when we try to send an Instant Message in the eyeBeam it says: "User not available". In asterisk console appears a message saying: ------ Apr 18 17:13:22

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

Hello All, I am looking for a IAX2 analog telephone adapter, just want to ask your views on which ones are bad, good and the best. Thanks in advance, Dinesh Birlasekaran Network Engineer, ComIT, Institute of Molecular and Cell Biology 61 Biopolis Drive, Singapore 138673 HP : 92962676 DID : 65869804 Fax : 67791117 Email : dinesh@imcb.a-star.edu.sg WWW: www.imcb.a-star.edu.sg

Hello Everyone I just bough my Xten Eyebeam but i don figure out how to make the video works i only see a black screen where de remote video suposse to appear, Any help regarding this matter will be very preciated Thank You

Hello All, I have managed to get my cisco and asterisk able to talk to one another I think. But cannot make a call from a phone behind call manager to the asterisk server. I have followed the cisco asterisk integration on the wiki. I have also setup a number 3000 for dialing for current local time and date on asterisk. I can call from a sip phone behind asterisk, no problems. The problem

Hi, Recently I been using EyeBeam with Asterisk. I can make calls with video, I'm using two PCs with EyeBeam but I noted that I can't enable only one client to stream video, I mean if I start streaming video on one client the other one doesn't receive any video until it starts streaming video itself. So I cannot have unidirectional video calls. I remember this problem with

-----Original Message----- From: Ferguson, Michael Sent: Tuesday, February 01, 2005 11:35 AM To: 'asterisk-users@lists.digium.com' Subject: Messaging with * and eyeBeam G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's

Hi all, Eyebeam has a sip-chat function and it would be nice if I would be able to use it. But the problem is that I can't really find information about it. I can just try to send a message and on the Asterisk console a message like this appears: Jun 13 10:05:25 WARNING[6512]: chan_sip.c:7281 receive_message: Received message to <sip:bla@voiphost> from "Bla

Lately I have been getting many complains that Eyebeam crashes when you dial a number that does not exist. This happens in both R2 and ISDN PRI lines. The softphone stops working and has to be restarted. The response I got from tech support was: the actual issue is that asterisk should not be sending a 503 service unavailable when a particular softphone is not online. The soft phone stops

Hi, I have a very rudimentary kind of question on using unlist(). I am parsing a bunch of JSON text using rjson package. Some data elements in a dictionary happen to be null which rjson parses correctly. > fromJSON(json_str='{"query":{"A":10, "B":null, "C":"hello"}, "query":{"A":20, "B":null,

Sorry, I don't remember who was asking about this, but it seems that if you record a video message that contains the send video start, it will actually fire up the remote receive window. I.E. Previously I was using the recording section of voicemail to create my video IVR's. This meant that when I arrived at the section to record the message, I had already clicked send video in Xten.

Hello all, I want to sniff all these info to test a sip ip phone talking to a asterisk server. I have used tcpdump, but It just shows the UDP, length: 602 Anyway to see the sip uri. Host info? Regards, Dinesh. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi! I use Bria and eyebeam and it seems that asterisk doesn't send RCTP keepalives when a SIP channel is on hold. This is a known issue as is described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+phone+Bria This gets very annoying because very often people are put on hold longer than 30 seconds (the phone's default.) In a company with more than 100 soft phones

What's the status on using eyebeam with Asterisk, does it still require a patch to Asterisk to support the video component? I'm intererested in starting to use Video and audio telephony but wary of anything that requires patches. -- Chris Mason NetConcepts (264) 497-5670 Fax: (264) 497-8463 Int: (305) 704-7249 Fax: (815)301-9759 Cell: 264-235-5670 Yahoo IM:

Hello all, I HAD video working before I upgraded to 1.08 (latest stable with Gentoo) and now it won't work. I just see noise bars and not the video. I know the camera works as I can use it in other programs such as AIM & Yahoo. I have the following setup: sip.conf [general] videosupport = yes port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind