similar to: extensions.conf for VOXEE using SIP!!

Hi, I have just signed up with Voxee.com and have attached my Asterisk server to dial them via IAX2. Below is the start of the log which dials the number and promply hangs up when the call is answered, with the logs saying that the channel is not compatiable. I have traced this down to the g.729 codec which I don't have installed. Any ideas on how to force that the codec not be used?

I'm having a problem with sound output to the console. My basic dial plan is as follows: exten => _1NXXNXXXXXX,1,Dial(IAX2/####@voxee/${EXTEN},30,A(beep)) exten => _1NXXNXXXXXX,2,Playtones(info) exten => _1NXXNXXXXXX,3,Hangup I get the following output in the console: ___*CLI> dial 1#######@voxee -- Executing Dial("ALSA/default",

I've got a problem with audio output from the Asterisk console. I'd really appreciate any help. I'm simply trying to dial out to a phone on PSTN. My extensions.conf entry is as follows: exten => _1NXXNXXXXXX,1,Dial(IAX2/####@voxee/${EXTEN}) exten => _1NXXNXXXXXX,2,Hangup After starting asterisk and dialing, I hear a ringback tone through the console speaker, and the PSTN

I cannot find any means of passing my own Callerid using Voxee. It always comes across as NO ID, or nothing, or unknown. I could not find anything on their website about setting your own caller id in the system either. (their web account pages). Is anyone here using their own Callerid information through Voxee? thanks

Hello all, I am using a headset and the X-lite softphone (sometimes I use IAXComm, but I'm having difficulties using OSS emulation with it) to connect via uLaw to my internal Asterisk server, which is a Pentium II 400 with 128 megs of RAM. After getting this headset, most or all of the echo people on the other line were complaining about is now gone, according to them. However, every

Anyone having problems with voxee since last few days or is it just me ? In peek hours i get LAGGED when i do a iax2 show peers or even 1000 ms latency . Most of time it is 20 ms or so but when i start sending traffic to them latency increases to 1000 ms or even LAGGED ( also shows high in peak time even when no high latency ). No problems with any other provider . Anyone else having same problem

I have incoming PSTN lines on an Adtran 750 channel bank. Calls are evaluated by an agi script based on callerid and forwarded to an international DID through Voxee. There is an IVR at that number that asked to user to enter a selection. When the user presses a key, my pbx puts the call on hold and tries to start music on hold. What's doing this? I have no backgrounds, no listen, the call

I have several DIDs (working well) with LiveVoip and I just signed up for some outbound minutes. Unfortunately they did not send connection instructions. I tried: exten => _1NXXNXXXXXX,2,Dial(IAX2/userid:password@217.160.244.186/${EXTEN}|60|s) but I get the error Feb 19 15:14:09 WARNING[21453]: chan_iax2.c:5546 socket_read: Call rejected by 217.160.244.186: No authority found --

I am trouble finding a configuration that works for ChanIsAvail and SIP. My two providers are Voxee and Teliax. I have these lines in a macro exten => s,n,ChanIsAvail(SIP/teliax&SIP/voxee) exten => s,n,Cut(CH=AVAILCHAN,-,1) exten => s,n,NoOp(AVAILCHAN= ${CH}) ; Dial the available Channel exten => s,n,Dial(${CH}/${ARG1},60,t) Looking at the execution, I can see what the AVAILCHAN

I am trying to construct a macro for long distance dialling. I have two internet feeds, I have all routes including Teliax on Internet A and a static route to Voxee on Internet B. I thought I could use the dialplan entry below which uses the ChanIsAvail() command to check the connection, but this returns the provider but not the username, so I don't understand how to use this for real

Hello all, I am trying to find out if anyone has a provider that is good with dtmf playback using a Sipura 2100? I've just dialed with voxee and the call goes through but when I press 1 my dialer does not " hear" it. My dialer is making the call using a Dialogic d/4PCI connected to the Sipura 2100 through voxee and I am calling my landline. When I pick up the landline

hi all i am using CVS with Realtime mysql on backend. Dial application is invoked again and again what is the reason. I have tested it by printing some message to debug. this application is invoked again and again here is debug you can see lot of messages from app_dial.c at the end. Any one tell me what is the reason. Is this a bug or what Kamran Ahmad

I would like to create a simple menu that would allow a caller to decide whether they want to leave a message or be forwarded to another number (i.e cell phone). Thanks in advance for any insight. Here's my current extension.conf [general] static=yes writeprotect=yes [globals] [default] exten => 101,1,Dial(SIP/101,20) exten => 101,n,Voicemail(101 at default) ;This automatically

Hi everybody, I've got a very strange problem: As far as I remember I didn't change anything on my Asterisk side. I have 2 SIP providers to which I can place outbound calls. Today I noticed that outbound calls to provider "inode" fail (and inbound from this provider too). On the CLI I get every 20 seconds following messages: Nov 9 20:01:07 NOTICE[952]: chan_sip.c:5422

As I got to compile 1.0.6 and got it to run but having the same problem as before I thought of creating a new mail thread about this instead of continuing with one where topic is about something else. (Sorry) So, I can't do register anymore. It worked just a couple of days before and I haven't done anything special as far as I remember. *CLI outputs: Feb 28 22:16:55 NOTICE[53475]:

Dear all i'm trying to originate an outgoing call with the command originate, from Asterisk's CLI i'm typing: CLI> originate IAX2/my-iax-provider/number2call application wait 10 [Apr 18 19:31:12] DEBUG[32331]: chan_iax2.c:4000 create_addr: prepending 40 to prefs -- Call accepted by 62.149.202.150 (format ilbc) -- Format for call is ilbc -- Hungup

For outbound only, I have traditionally recommended VoipJet. They just recently has a spat of issues that seem to have resolved though. I am still using them via their east coast server and it seems to work quite well again. Cost is around 1.3 cents minute I believe. Use IAX and g711 for best quality to VoipJet. Thanks, Wiley -----Original Message----- From:

I am trying to use ChanIsAvail to detect the best route for a call. I am testing by dialing an extension that is then forwarded to the DID. Normally it will be an incoming PSTN call that is forwarded. When I try it, I get put on hold for a few seconds and miss the beginning of the recorded message. Any ideas what is going on? -- Executing ChanIsAvail("SIP/501-304d",

Hi, I'm having a problem with the queue behaviour in my place: I have two ISDN channels to the outside (Zap/1) and two channels two a Siemens Gigaset (Zap/4). I also use a SIP gateway to call outside and have a couple of IP phones around as well (SIP). The Gigaset has about 5 phones connected to it (+base station). Whenever two people are using those, I always am blocking two internal

I've already sunk several hours into this without any real progress, so I'd really appreciate any help My task is simple -- establish a connection between a softphone on XP ProSP2 to a Asterisk server on Linux FC4 over a LAN through a Netgear router. The server will then go out to a PSTN termination service. Thus far, the PSTN termination connection works fine -- I've opened up 4569