similar to: TE406p no interrupts

Hello, Now that we've had our new Digium TE406P card in production for 4 days we have discovered audio drop problems that happen randomly across all channels. Here's more about our setup: P4-3.2GHz 2GB ram Slackware Linux 10.1 with custom kernel 2.4.29 Asterisk 1.2beta1 Digium TE406P quad T1 card with the following attached: - 2 x RBS D4/AMI 24 channel T1s - 1 x RBS B8ZS/ESF 24 channel

Hi all, I am having problems detecting fax on a client site using the TE406P (card with echo cancellation module) under 1.2 and was wondering if anybody was having or has had similar problems? Currently I can not get the system to detect fax for love nor money, in zapata.conf the relevant entries are set to: faxdetect=outgoing and I have a fax extension in the necessary context. I have taken

It works out that name "Unified t4xxp/t2xxp driver" is not accepted anymore by 2.6.13 kernel. Need to remove "/" for it to load properly > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Boris Bakchiev > Sent: Monday, 15 August 2005 18:17 > To:

Hi, Before I report a bug on http://bugs.digium.com, I would like to know if someone is seeing the same error message. Personally I am not using wctdm24xxp but other modules such as wcte12xp and wctdm. The latter modules load fine and are compiled with pci_register_driver as expected. The only module that seems to require the deprecated function pci_module_init is wctdm24xxp. Is this normal?

Hi, I'm unable to load wct4xxp module for TE406P card. I've compiled 2.6.13-rc6, got latest CVS (as of today) of zaptel, but when I try to load the module I get this: kobject_register failed for Unified t4xxp/t2xxp driver (-13) [kobject_register+53/73] kobject_register+0x35/0x49 [bus_add_driver+62/153] bus_add_driver+0x3e/0x99 [driver_register+55/58] driver_register+0x37/0x3a

I am having a problem with asterisk not being stable enough for production use. I have two cards, the digium TE406P, and the TE410P. The TE410P is the primary card that I am using but I would like to move to the TE406P for the echo cancellation and more flexibility of PCI slots available. General config info: 3 PRIs, configured as such: span=1,2,0,esf,b8zs span=2,0,0,esf,b8zs

I received a TE406P card from Digium yesterday and have done several tests on it and cannot get it working reliably with any Stable release or even CVS v1.0. What are other people that are using the TE406P card using for an Asterisk version? I tried 1.2.0 beta1 and it seemed to function well except for an unrelated issue with the beta release where the manager interface chokes under

Hi Guys, I need your recommendation which card to buy?The TE411P or TE406P do they have any difference?I check their brochures they are differ only when it comes to PCI slot voltages.Which card best to use?Btw,Il be using supermicro board with 3.3V and 5.5V?Will il be experiencing problem during the implementation later on if i choose the wrong PCI voltage options?Will it depends on

I just wanted to post here and let everyone know that the TE406P (quadspan T1/E1 with hardware echo can) kicks some serious ass. We've been running a PRI now for over a year with Asterisk (every single call in and out is through two Asterisk boxes, including faxes) and while the software based echo cancellation is more than adequate, we'd get the occassional "edgy" echo and

HI all, Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci

Guys, I'm trying to configure a TE406P with MFC/R2. here goes my zaptel.conf: span=1,0,0,ccs,hdb3,crc4 cas=1-15:1101 dchan=16 cas=17-31:1101 span=2,0,0,ccs,hdb3,crc4 cas=32-46:1101 dchan=47 cas=48-62:1101 The first strange behavior is that the: zap show status shows this: Description Alarms IRQ bpviol CRC4 T4XXP (PCI) Card 0 Span 1

Hi, Does anyone know if it's possible to have 1 port of TE406P to provide T1 PRI to other VoIP gateways? I am trying to provide T1 PRI to one of our old Clarent gateways to integrate it to Asterisk. Can anyone help? Thank you. Andy

I am getting ready to purchase my first Digium card to start experimenting with Asterisk. Before I make my purchase, I wanted to make sure I'm not going to have issues with these cards (need to see what the specs are on my box, 5V or 3.3V PCI ). I will be using Asterisk @ Home, so will be Asterisk v1.0.9. I took a quick poke at the lists, and it appears several people have been having

Hi, My configuration is pri----*(te405p)---iaxclient. My * version is 1.0.7 running on tyan dual opteron board. I have several problems. 1) inbound echo For outbound call(iaxclient-->pri), there is almost no echo. But for inbound(pri-->iaxclient), I can hear distinct echo. Can Sangoma a104 or digium te406p help this problem? 2)Today i received te406p. I know T1/E1 jumper. But how can i

Hello all, It used to work on calling my GTalk ID from another GTalk user. But now that I tried calling it again, the caller hears only a ringtone and disconnected after a few rings. The messages on my Asterisk-1.4.21.2 are the following: [Jan 29 10:37:51] ERROR[1303]: rtp.c:1945 ast_rtp_new_with_bindaddr: Unexpected bind error: Cannot assign requested address [Jan 29 10:37:51] WARNING[1303]:

Hello folks. I've got a strange issue. When I modprobe TE220 I do not see mesages like Launching card: 0 <..> Setting up global serial parameters. You can see how I loaded and unloaded the card for several times - http://asteriskpbx.ru/pastebin/11 lspci can detect the card: 03:08.0 Communication controller: Digium, Inc. Device 0220 (rev 02) dahdi_hardware also: astpbx ~ # dahdi_hardware

Hi: I want to use asterisk1.2 but I don't know which version of asterisk1.2 and zaptel1.2 is best.Please offer me one version of asterisk and zaptel and libpri.How about asterisk1.2.24 and zaptel1.2.20.1 and libpri1.2.5?And do they work togather well? Best regards. --------------------------------- Pinpoint customers who are looking for what you sell. -------------- next part

Nobody has been able to answer this. Not even Digium at this stage, but I'm hoping someone here, smarter than I, will be able to. We are running some TE406P (upgraded 405Ps) cards performing mainly PRI bridged calls. After a server is brought up, calls sound absolutely perfect. Over time, delay (latency) creeps into the calls. What is really weird about that is apparently with the new

Hi Guys, Im planning to purchase Supermicro server but I dont have idea what Motherboard and chipset model will work with TE406P.I read one post here that the chipset should be Intel E7520.Is it true?Is there other recommendation?My requirement by the way is to handle 1000 simultaneous calls. Does dualcore xeon (single cpu) and 2gig memory can handle this w/o

I have an Asterisk sever running with a TE406P card, and 4 pri T1's. I am trying to findout how to send access codes to the switch. After a long distance call is dialed, we get a second dial tone and I need to enter a 4 digit access code, then the switch will place the call. Does anyone know how I can do this? Or does anyone know how to tell asterisk to send to 4 digit code after it is