similar to: Configuring SIPURA 2002 to work wih Asterisk

Hi, I'm trying to configure Sipura 2000 (behind NAT) which connects to Asterisk (public IP, no NAT) and having interesting results. When Sipura is behind Linux/NAT firewall it works great and no special NAT settings on Sipura are necessary. The issue I'm having is when Sipura is behind Linksys broadband NAT router. Sipura gets registered with Asterisk just fine, but I can't hear

I have been trying to read everything I can find on Sipura 2000 and Asterisk. I am trying to make the Sipura-2000 act as two analog lines off my asterisk. I have followed (what I believe) the example on http://www.voxilla.com/Article39.phtml and I still can't get my Sipura to register with my Asterisk server. I can re-config my Sipura to talk to fwd, or voice-pulse connect and it works

If I have multiple Sipura 3000 device how can I dial out properly? I can receive call without any problem and that's working really well. Caller ID is shown and when someone call he get's the welcome message the same way I have it configure with the X100P card. I don't seem to have any echo problem with the Sipura 3000 (but I do with X100P cards) My main concern is for

I am trying to configure the FXO port on a Sipura-3000 for use with Asterisk. When I connect to the Sipura to dial out on the PSTN line connected to the Sipura's FXO port, it gives me the dialtone of the PSTN line and then I can hear the DTMF for the number I dialled beforehand. It does work but the customer perceives this delayed second DTMF feedback as "unprofessional" and the

This may not be the right place to ask, but I have an annoying issue with a Sipura/SPA1000-2.0.10(e) ATA device connected to an Asterisk box. (The system is remote to me, so I've only been able to observe this by dialling into a VoIP phone on-site, then run commands on the box remotely!) First of all it's all working fine connected to an Asterisk box and the user can make/take calls

Sipura does include STUN as an option. It has for quite some time. We are using it with all of our Sipuras behind NAT'd gateways and it works great! Try upgrading to the latest Sipura firmware rev. Darren Nay > -----Original Message----- > From: John Todd [mailto:jtodd@loligo.com] > Sent: Saturday, May 22, 2004 1:57 PM > To: asterisk-users@lists.digium.com > Subject:

We are using MFC/R2 driver successfully in at least three places in Brazil. I have problem with an Asterisk integrated with MFC/R2 with a Siemens Hicom 300. I can get a good audio quality with Grandstream, Polycom, and X-Lite softfones, but SIPURAS and Linksys get a garbled audio, something like a "Darth Vader" voice. We have tried everything in Sipura. The SIPURA 2000 and the Linksys

I've been beating my head for 5 hours to figure out why my asterisk server or sipura isn't passing my voice over to the caller. It seems i can hear the caller but they can't hear me it seems either the asterisk or the sipura isn't passing this information. Here's my setup specs asterisk server 0.7.1 - X100P Card - Sipura 2000 - Nufone Service - Voicepulse

At 7:36 PM +0200 on 5/22/04, Olle E. Johansson wrote: >>[snip] >Sending NOTIFY to Asterisk is an error, but a workaround. Since Asterisk >can handled the NAT traversal all by itself with Qualify (as John points >out) disabling the NOTIFY will not change anything. > >The NOTIFY will in no way affect the status - unreachable/reachable. > >Another problem with the SIPURA is

With sipura (I tried this with both the 3000 and 841) set to prefer the g726-32 codec, a call from the sipura to asterisk will use g726. Asterisk sip.conf has: disallow=all allow=g726 allow=gsm allow=alaw When the call is from asterisk to the sipura, asterisk will not use g726. It ends up using alaw. I usually use stable but I tried this with head too, and same thing happens. Anybody know how

Hello. Has anyone run into problems accessing voicemail with the Sipura SPA-2002's? Our SPA-2000's work fine (registers fine, able to make and receive calls properly & also able to access voicemail). We've configured the 2002's exactly the same way. However, with the SPA-2002 we're unable to access the voicemail system (though it does register fine and is able to

I recently purchased a Sipura 2000 and connected a phone to it which is connected to my asterisk box via sip. Calls to the Sipura 2000 work fine from another sip device connected through *, from either an fxo or fxs (via adtran channel bank connected to a T400P card) port. However, when a call comes in from the phone company over a T1 with em_w trunks, the phone on the Sipura will ring but I

Hi list, Well I really didn't want to see things get to this point, but Sherman at Sipura along with their President Jan F. leave me no other choice. SIPURA has been provided a letter from our attorney for Breach of Contract and damages. They have yet to respond. A quick background. 1. Sherman (SIPURA's Director of Marketing), stated that we would do a join press release for the Oct

Anyone have any luck RMAing a Sipura phone since the Cisco take over? Sipura only has support via email or fax to end users and I haven't gotten a response to either for over 2 months. Linksys Support will jump you through all their scripted hoops to resolve your problem (they hope if they speak with a thick enough accent and make repeat the same steps over and over again that you will just

Hello list, I have several SPA-2000's and 3000's scattered about the Internet (all behind NATs). Because I do not qualify as an ITSP, Sipura will not license their "Sipura Profile Compiler" so that I can have the units remote upgrade, remote re-configure, etc (via TFTP or HTTP). This is extremely annoying. Right now if I have to make a config change to any of these

Hi all, We have several sipura 3000's working well for outbound calls, however the issue we have is that when calls are sent to the Sipura with Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately and then proceeds with the call "in band" therefore sending dialing sounds back to the caller. Other SIP gateways we have notably the Vegastream and others do not do a SIP

I'm experiencing a problem with a Sipura SPA-941 not available for incoming calls after Asterisk & Freepbx upgrade. I can dial out with the phone gto any other internal or external ext. It is registered with the Asterisk server. When I dial the Sipura directly from any other extension, it goes directly to vm. I have other Sip softphones that are working fine. A sip debug when calling the

Hi folks ! I bought two sipura 841 phones. I used to have GN Netcom headset which I connect instead of the handset. The problem is that I don't have any sound coming out the headset and I can't speak neither ! I'am located in France and I was wondering if the cabling in the sipura and in the headset is the same (I mean the order of the cables) or maybe is there something else to

I would like the ability for a sipura sip device to instantly connect to an asterisk server as soon as the sipura sip device goes offhook and before any digits are pressed. This way asterisk can provide the dialtone and the dialplan. This also allows me to play a greeting to the phone before giving them a dialtone. Is there any way to do this, like possibly having the sipura device dial a

I'm really trying to understand this. I have a Sipura 2000, brother MFC, and SpanDSP set up on asterisk. because asterisk softfax was not working well, i set up faxes to goto line2 on the sipura. this is working fine, i have only tested a few short faxes, but already my completion rate was 100% vs 5-10% that spandsp and asterisk gave me. here's the odd part. using the fax machine, I