similar to: spandsp txfax multi page problem

the attached log with verbose=6 and debug=6 refers. we've got a sangoma A104 (no hwec) with PRI ports 1 & 3 loopbacked to each other. we're trying to have txfax send out on one of those pri ports with rxfax listening on the other side, hence having asterisk send a fax to itself. we however have bad, and i mean really bad (<10%) success rates. we're currently using asterisk

Hi, We have no problems sending to HP and Panasonic fax machines in the office. We do have problems when we try to send faxes to services supporting fax, i.e. J2 or our UC platform. The receiving side doesn't recognize fax. To send a fax we drop into /var/spool/asterisk/outgoing: Channel: Zap/g1/<fax number> MaxRetries: 0 WaitTime: 20 Context: webley_txfax Extension: txfax_ext

Hi Steve and all, 1. Faxing from asterisk back to the same asterisk (from one Zap channel to another) doesn't work for us. Txfax called with the 'caller' parameter issues CED, while the receiving side needs CNG in order to switch to fax extension with rxfax. 2. This is probably the reason why J2 and our UC don't recognize incoming fax. Thank you. Alex Zarubin Webley Systems

Hi, I tried to use txfax to send several faxes at the same time. It seams, that one can't send more than 3 faxes at once, or one risks to get 50% and more aborted faxes due to errors. The CPU usage is below 97%. I tried with Opteron and IntelP4: same result. Ok, I know, that faxing via a digital line is complicate, and I shouldn't complain, but I would like to know, whether these are

Hi everyone ! I have some aditional info on problem with TXFax and sending multi-page TIFFs. I have made 6 different multi-page TIFFs (Group3 1D with fillbits EOL aligned - 3 pages one TIFF in lowres and one in hires, Group3 2D -3 pages againg in both resolutions , and Group 4 - 3pages in both resolutions), and then tried to send them to Panasonic KX-F1100, Panasonic KX-F500 and SpanDSP

Hi List, I wonder that how I can check that FAX is delivered successfully or not, in my dialplan while using TxFAX. Which variable contain fax status? as PHASEESTATUS and PHASEESTRING in Callweaver. Regards Nasir Iqbal

I followed the instructions at http://www.opencall.org/instructions.html and http://lists.digium.com/pipermail/asterisk-users/2003-October/025094.html I was able to compile spandsp (./configure ; make ; make install), "manually" patched asterisk apps/Makefile (/usr/src/asterisk/apps), as the supplied patch does not fit the actual CVS apps/Makefile After make clean ; make install, I

Thanks for the information Lee ! Still, something is still strange to me, since this two Panasonic Fax machines are receiving at least 20 multi-paged faxes a day (they are in same office as both Asterisk boxes, and me :) ). Beside that, POTS lines in those two faxes are from same PSTN switch as line in X100P in one of Asterisk boxes, and the ISDN PRI lines in other Asterisk box is from same PSTN

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, anyone else seen RX/TXFax crashing Asterisk on latest Asterisk SVN? I've now seen it on two machines I tried to set up - one it seems because the tiff file was malformed, but the other is doing: tiff -> tx fax -> zaptel -> pstn -> ddi -> zaptel -> rx fax -> tiff The above crashes every time. If no one else has

I've been using spandsp and rxfax to receive faxes for a while now and over the past few days I've looked into the other side of things - txfax. I can't seem to get it working properly. I've included debug logs below of both the tx and rx side of things. I've tried three different servers, asterisk v1.0.6, 1.0.9 and CVS, FC2 and FC4, libtiff 3.5.7 and 3.7.1, TE405P and

OK I see the ponit (although I never said that second page is interrupted - I said that in some combinations of resolutions and TIFF options receiving fax "spits" another blank sheet of paper beside the clearly received first page). I have read someware (some faxing tutuorial) that there is some kind of control code (6 EOLs I belive) that should be in TIFFs between pages and that

Hello folks! I'm trying yo set up a email2fax and fax2email on my asterisk box. The rxfax works fine in my setup. The problem is with the txfax. I have tryed all snadsp version (0.0.2x and 0.0.3x) but I get this errors. Because I can't find anything on Internet I'm hoping u can give me a hand. here are my logs: -- Attempting call on SIP/sip_provider/1234 for application

I'm getting the following when sending to a specific fax machine. Any ideas? File name is '/var/spool/asterisk/email2fax/7F2SOeYJiU.tif' Changed from phase 0 to 2 Slow carrier up Slow carrier down Slow carrier up <<< NSF: 20 00 00 11 80 00 8a 49 10 53 54 49 52 4c 49 4e 47 20 43 4f 56 49 4e 47 54 00 67 00 80 80 80 0c 01 02 NSF without final frame tag The remote is made by

Hi, I've been trying to get fax going for the last few days. I can receive fax with Spandsp 0.0.2pre19 on Asterisk 1.0.9 with rxfax, but when I tried sending the received fax file to a fax machine, I either get "line error" or just a blank page. Is anyone using Spandsp to send fax to fax machines on PSTN? I've run out of things to try now, and I'd really appreciate if

Hi ! Does anyone managed to send multipage faxes (in single TIFF file) with app_txfax from spandsp package (i'm using 0.0.2pre18, libtiff 3.7.1)? If so, I'm interested in format of TIFF file that has been sent sent succesfully (tiffinfo <fax-filename>). I'm having problems with app_txfax, sending first page successfuly 99 % of the time, but never managed to send second or

Anyone know how to fix this? gcc -shared -Xlinker -x -o app_rxfax.so app_rxfax.c -lspandsp -ltiff In file included from app_rxfax.c:14: /usr/include/asterisk/lock.h: In function `ast_mutex_init': /usr/include/asterisk/lock.h:302: error: `PTHREAD_MUTEX_RECURSIVE' undeclared (first use in this function) /usr/include/asterisk/lock.h:302: error: (Each undeclared identifier is reported

I'm trying to put together a package of asterisk-head, spandsp, and app_rx,tx fax. I can get everything to compile: spandsp-0.0.2pre20 asterisk-head (cvs co -r HEAD asterisk) the app_rx/tx from soft-switch.org in the 1.1 folder However, asterisk complains that there is unused symbols when running /usr/sbin/asterisk -vvvvvvvgc ARGH.. Does someone have a package with files that I could try?

Hi, I?ve been having a lot of trouble extending the schema on our DC. After a few failed attempts and a few hours of researching the issue, I decided to seek help here. For context, I am trying to extend the schema to add a custom attribute to the Person class that would contain an IMAP login name. It didn?t seem reasonable to use any of the existing attributes of this class for this purpose

Rowland [2020-10-24 12:38:36 +0000]: >I take it your imap login is probably something like fred at example.org, >if so, what is wrong with using the 'otherMailbox' attribute? The IMAP logins are not email addresses, but rather simple login names, such as ?fred?. Otherwise we would just use the mail attribute. >You used [command] twice, unless it was typo. Typo, sorry.

Hello All ~ Having problems sending and receiving faxes with SpanDSP. I am testing on a simple 2 analog POTS to 2x X100p set up, connecting one line to a Konica 720 fax machine to test, or with other remote fax machines. Voice calls are working pretty well now. Platform is P3/800MHz/256MB/FC1. * recognizes faxes, and passes calls to RxFax and TxFax OK, but 99.9% of the time no fax content is sent