similar to: "Provisioned, Down, Active", but D-channel seems to be fine

Hi all, I'm sure something similar has been discussed, but one can only wade through the archives for so long. I'm setting up a T1 and my telco has a bunch of questions it wants me to answer. I know much of the TE110p is configurable to do any of this, but I wanted to know if there is an optimal or preferred setup. Any help would be appreciated. Here is the quiz my telco is giving me:

Hi all, I'm sure something similar has been discussed, but one can only wade through the archives for so long. I'm setting up a T1 and my telco has a bunch of questions it wants me to answer. I know much of the TE110p is configurable to do any of this, but I wanted to know if there is an optimal or preferred setup. Any help would be appreciated. Here is the quiz my telco is giving me:

I'm ordering a PRI T1 for use with Asterisk and a Digium Wildcard TE405P. The provider is asking me a number of questions about how I want to configure the line. Here goes: 1. Dial Tone - No, Yes - Precise, Yes - SCC 2. Framing - SF, ESF 3. Line Coding - AMI, B8ZS 4. Signaling Type - Ground Start, E&M, Loop Start w/Ring, Loop Start w/o Ring 5. Pulse Mode - DTMF, MF 6. Outpulse Start -

Hey All, AT&T is installing a PRI in a couple weeks and while I've been doing homework on PRI's for the last few weeks there's something I'm still confused about. After being asked how many digits I wanted them to send us (10) was how many digits will you outpulse to us, 4, 7 or 10? I asked her what that meant and all I got was the question repeated. Do any of you have

We are in the prossess of ordering a ISDN (PRI) line from Verizon. There are a couple of questions on the application that I don't understand. I'm still a newbie here but we're taking the big plunge. If someone could give me some direction here I would be greatly appreciative. The questions on their app that I don't understand are: 1.) The Verizon Co will outpulse 10

Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1

? stato filtrato un testo allegato il cui set di caratteri non era indicato... Nome: non disponibile Url: https://stat.ethz.ch/pipermail/r-help/attachments/20070905/6d1002c1/attachment.pl

Here is the packet trace - ICMP seems to be coming from my SAMBA Server - see frame 3 Does the netstat output look correct in my first request for help? Joel Morrow jiram@aol.com TRACE Frame 1 (92 on wire, 92 captured) Arrival Time: Dec 22, 2001 09:36:08.333676000 Time delta from previous packet: 1.999444000 seconds Time relative to first packet: 2.000088000 seconds Frame

Greetings, Our telco called last week, saying that a lot of channels on our PRIs are blocked. And with blocked they have the following description in the Siemens exchanges: BBAC BLOCKED BACKWARD This status is set when the partner exchange has a blocking set and the signaling of the trunk (non-CCS7) is able to report this blocking in the backward direction. This status can

Hi all, Muppet from the UK asking for help We are just about to have a T1 line installed in our office in Dallas and "Advantex" the supplier has sent a questionnaire asking a number of questions. I have put the question area at the bottom of the email, we will be using Digium's hardware. could anybody help :-) In the UK when I asked for a E1, number of trunks required and the

I've had to set up an iptables filter to drop packets originating from ports 32944, 33169 and 33171 on a samba 3 server as broadcast 'storms' lasting ~3seconds have intermittently been taking down all net communication. Can anyone shed any light on this? The packet capured in ethereal is below. Lee Baker Sorry for not trimming - not sure what's important: No. Time

I am trying to resolve a problem with NetBIOS wildcard broadcast queries being relayed/repeated by around 50 US Robotics wireless access points. The APs only re-broadcast wildcard queries from our samba3 server - our numerous windows 2003 servers do not appear to use wildcard broadcast queries (if they do, they are not causing the same problems). Any help would be appreciate as this problem is

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic", we disabled all the

hello, I have 2 samba serers, a pdc/wins server on 10.0.0.1 for one subnet (/24), and a ldc/winsclient on 192.168.0.1 for it's /24 I start the pdc, and wait for it to win all it's elections, then start the ldc and wait for it to win it's elections, at this boint the lists are synced to whatever the pdc has, however it is unable to complete future browse syncs, this has the effect

I apologize for the terribly long message, but here goes. ------------------------------------------------------------------------------------------------- First, regarding existing tools that I now about. libavcodec and users (e.g. HandBrake): - if there are 6 channels or less, the layout is set by the decoder as per the FLAC specification - if there are more than 6 channels, the layout is

I built the CVS version of the Speex library - v1.2 it calls itself. Asterisk seg faults trying to use codec_speex.so. I'll have a look to try to fix it, but thought I'd just ask if anyone else knows what needs to be done? Steve

Hello! I use NSD 4.7.0 self compiled: Configure line: --build=x86_64-linux-gnu --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking

On 05/04/16 13:48, lingpanda101 at gmail.com wrote: > On 4/5/2016 8:17 AM, mathias dufresne wrote: >> For me: >> - SOA means where updates can be sent. >> - SOA can be one or several. >> - NS is a record to help non-authoritative name servers to find a valid >> name server for the zone they receive a request and they don't know >> anything about that

I can only conclude that Samba is an elaborate hoax and here's why. 1) Setup is more complex than Sendmail (it set the standard for complexity) 2) Even the simplest smb.conf causes trouble 3) You can pass ALL the tests in the DIAGNOSIS procedure, AND Samba will still not let you SHARE FILES or SHARE PRINTERS between Windows and Unix but you WILL be able to BROWSE YOUR SHARES (Just pretend

Hi, I'm stuck on a silly thing. I need to get the "billsec" CDR value after a call. But I'm finding its always 0. Here's my test code: exten => *244*,1,Dial(Local/test@custom-tests/n,,g) exten => *244*,n,Noop(after dial duration is ${CDR(duration)} billsec is ${CDR(billsec)}) exten => *244*,n,Hangup [custom-tests] exten => test,1,Answer exten =>