similar to: OT: Sipura SPA 200 Caller ID Problem

Hi, the topic says it all really. Does the Sipura 3000 detect and report UK clid correctly? thanks Mike

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

I found a thread [1] last month about the poor/crappy g729 quality on Sipura units. Anyone noticed an improvement or the quality is still poor? If the Sipura firmware/g729 offers no quality yet, who else is offering a dual channel g729 ATA? I heard about Uniden, but I have no "reports" about their ATA... [1] Sipura g729 call quality to PSTN

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

Hi, I'm using the SPA-2000 with firmware 1.06 on the Asterisk PBX, which works great for taking and placing calls, but for for some reason I can't seem to clear the stutter dialtone by either calling the extension I'm on, or the voicemail system on the Asterisk PBX. If I call my voicemail access extension directly, It tells me I have no messages waiting, yet when I hang up, then

I'm experiencing a problem with a Sipura SPA-941 not available for incoming calls after Asterisk & Freepbx upgrade. I can dial out with the phone gto any other internal or external ext. It is registered with the Asterisk server. When I dial the Sipura directly from any other extension, it goes directly to vm. I have other Sip softphones that are working fine. A sip debug when calling the

Hi, I'm looking for a full list of xml provisioning variables of the SPA-2100/3000. Currently the Sipura website has example XMLs only for the SPA-841 [1] and SPA-941 [2]. I'm mostly interested in the CallerID type selector variables and whatever variables control the PSTN<->VoIP settings. Sipura Configuration website form field names are numeral only. :( [1]

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

Hi All, I'm on of those brave souls who bought into the preproduction beta of the Sipura SPA-3000 FXS/FXO adapter. I've had the unit a few days and am exploring it's workings. I really want it mostly as a straightforward FXO adapter, to replace an X101p. Let me be clear, I'd love to support Digium in every way possibe, and will likely buy a TDM40 card shortly. But, the X101p has

Hi all, Anyone able to remotely reboot their password protected Sipura SPA-3000 from command line. I am trying: Sipura SPA-3000 from command line: # wget http://admin:mypassword@192.168.1.55/admin/reboot The strange thing is it works fine when I go to http://admin:mypassword@192.168.1.55/admin/reboot with my web browser... Thanks....

I had a Grandstream 286 at my home hitting my Asterisk box at the office, all worked well and I received phone calls fine until the device just up and died. I replaced this unit with an SPA-2000 because I have been impressed with the Sipura devices and decided to use them for most of my needs in the future. Problem is that my phone attached to the device rings shortly after power up of the

If I understand correctly the Sipura people are the same guys that made the Cisco ATA (Komodo phone) or what ever. I'm going to get one of the Sipura SPA-2000 to use and abuse with *.... I have seen the web interface.. John over at Chagres was nice enough to let me login to one and look around a few weeks back... I'm impressed .. if you guys care to buy one

<< Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits.>> I have seen exactly this problem. Even IVR failed to work. Got an RMA from the supplier and they exchanged with no questions. Bill Seddon -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On

Hi, I have Sipura SPA-841 with two lines. And I have some little problems with it: 1) How to turn off alerting tone in Sipura, cause when I'm trying to call , I hear two alerting tones (I also have audiocodes product and I don't hear two alerting tones, just tone)? 2)The second problem: How to enable two lines to work with one number. For examle, if I'm talking with

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

All- I'm attempting to set up a Sipura SPA-3000 in Sao Paolo, Brazil. Not being a portuguese speaker, I'm having a rough time of finding the relevant information on how to make the thing pick up the PSTN line and make an outbound call. The sipura in question works fine on a bench connected to a POTS line in the US, but is now plugged in in Sao Paolo. The immediate thing I notice is that

I'm having lots of problems with sipura spa1001's and spa2002's. Asterisk claims they are busy when they aren't. Other times, it claims to be ringing them, but they aren't really ringing. I have done the following to try to resolve the problem: 1) I upgraded all my spa1001's and 2002's to their latest firmware (3.1.5). This lessened, but did not resolve

I've been beating my head for 5 hours to figure out why my asterisk server or sipura isn't passing my voice over to the caller. It seems i can hear the caller but they can't hear me it seems either the asterisk or the sipura isn't passing this information. Here's my setup specs asterisk server 0.7.1 - X100P Card - Sipura 2000 - Nufone Service - Voicepulse

Hello, I'm configured Sipura-3000 to forward IP calls to PSTN number on no answer (In User1 tab Cfwd No Ans Dest: 123456@gw0) IPPhone ---IP---> Sipura-3000 ---PSTN---> PSTN User Generally it works fine, but Sipura sends back SIP OK to IPPhone just prior to dialing to PSTN number. How to configure Sipura to detect that the remote side on PSTN picks up the phone and only then to

Hi there everyone! I've bought a Sipura SPA 3000, and succesfully connected it to my Mac, where I installed Asterisk 1.4.0. Both ports (FXO and FXS) are well configured). However, living in Brazil, I'd like to know if there are optimal settings to my PSTN that I should enter into the config of the device. I experience a little bit of echo on the FXO probably because I raised the gain of