similar to: CallerID Num and Name setting to Asterisk.. Problem

I am pretty sure that there are no IAX providers that offer CallerID name but wanted to double check with the list in case something has changed recently. Is anyone aware of an IAX provider that offers incoming CallerID name? Is there a technical limitation within IAX which is preventing IAX providers from offering CallerID Name? Why is no one offering this? -------------- next part

HI There is a question about the fxo of the zaptel card which is set a number to use as common analog phone. When I use ${CALLERID(num)}to get it's number, it could'n be done. But ${CALLERID(num)} could get the other number of the SIP or IAX . Could you tell me the reason, and how I could get the number of the fxo which is used as a common analog phone? Thanks

Is it possible to show CallerID names for dialplan applications? When I call from phone-to-phone, it shows the CallerID from sip.conf or iax.conf, but I don't know of any way to show CallerID Name when I call the extension for an application (voicemail for example): exten => 1000,1,Answer exten => 1000,n,VoicemailMain I'd like the display to read "VOICE MAIL" when I

Hi all, My VoIP provider (race.com) doesn't send name info with CallerID, so I wrote an AGI script that does the following: 1) If it's a toll free number (800|888|877|866), set the CallerID name to "TollFree Caller" 2) Use curl to look up the number in Google phonebook 3) If a business listing, set the CallerID name to business name, as is. 4) If it's a residential

I have a question for those of you out there using VoicePulseConnect for incoming did I have in my Realtime extensions Database (the x's are replaced with my phone number) context = voicepulse-in-01 exten = xxxxxxxxxx/ Priority=1 app=NoOp appdata = Incoming call with no callerid on xxxxxxxxxx However it never triggers I also tried using one of my other providers (voipjet for outbound) and

If you asked this question on the biz list you would get a lot of people that will tell you that they offer services where you can set the caller ID to what ever you want. To name a few:: Nufone Teliax Voipjet ----- Original Message ----- From: "Doug Crompton" <doug@crompton.com> To: "Asterisk Users Mailing List - Non-Commercial Discussion"

We are receiving phone-calls at one Asterisk box, it forwards them to a different location over IAX. Calls are answered on the other end of this connection. However, the callerID seems to be lost in the process. The 1st box shows the original callerID, on the 2nd box callerID shows the callerID of the 1st box. Apparently the 1st Asterisk box replaces the original callerID with its own. Is

Hi, I have two * box. One is box1 and the other is box2. And I have two iax clients A and B. A is registed with box1 and B is registed with box2. If I make a call from A to B using the following method: IAX/[<user>[:<secret>]@]<peer>[:<portno>][/<exten>[@<context>][/<options>]] The CalledID that B got is <user> but not A's CallerID. I

Is there some concensus on where to set callerid when making outgoing calls via an ITSP over IAX? Is this best accomplished in IAX.CONF or EXTENSIONS.CONF? Also, tech support at one ITSP told me that the SetCIDName command doesn't do anything. Is this something that might be unique to their server? Or a general statement of fact? Thanks, Michael -- Michael Graves

Hello. I'm having trouble with callerid on outgoing calls. The recipient of the call only sees "unknown" rather than the number I'm specifying. If I set callerid info when calling an internal extension then I see the callerid name and number when I call that extension. I did that thusly: exten => 101,1,Set(CALLERID(number)=1112223333) exten =>

Hi All Apologises if this has been disussed and I missed it. My SetUp I have a sip phone registered to an asterisk box (a1) in one location 1. This phone dials an extension which is in another location, so a1 passes the call via IAX to the other asterisk (a2) in location 2 which then dials the local phone. My Problem The caller ID setup in the sip.conf for the phone registered to a1 is not

If you define a sip peer, wheather or not you put an entry in the field OUTBOUND CID, if you dial an external extension (let's say an extension on another asterisk server, connected via IAX2 connection) the callerid received by the foreign asterisk is device <YOURNUMBER>: i.e device <567> If you take a look at etc/asterisk/sip_additional.conf, you can see under the SIP extension

I'm testing GotoIf($["${CALLERID(num) but I'm missing something as it is not working: [office-open] exten => s,1,Wait(1) exten => s,2,Answer() ; for Caller ID is 471-5665, always signal congestion: exten => s,3,GotoIf($["${CALLERID(num)}" = "4715665"]?4:6) exten => s,4,Playtones(congestion) exten => s,5,Congestion(5) exten =>

Im trying to figure out the base way to check the callerID being sent to my Asterisk box and use it if it is a valid NANP number, but replace it with a static NANP number if it is not. (Why? I have a few carriers that require this, and a few international users - if it happens to take one of the carriers that require it, I want it to set a static number that is valid). I'm playing

Heres a weird one... Call comes in on mISDN channel. Little bit of dialcode (in a macro) looks up the number in the astdb and puts an name to it. No real magic there, and it works well. Same macro also has parameter passed in to put a prefix on the name - this is set in the DDI handling and is dependent on the number called and allows phone users to see which number was called (company

I'm having trouble setting callerid with teliax. I use a simple dial-out subroutine to set the callerid depending on the calling extension, and then dial out. Teliax is saying they're not seeing any callerid info. [DialOut] ; subroutine for dialing out. exten => s,1,NoOp(Context: DialOut called with outgoing number ${ARG1} ) exten => s,n,NoOp(${CALLERID(num)}XXXX) exten =>

I cannot find any means of passing my own Callerid using Voxee. It always comes across as NO ID, or nothing, or unknown. I could not find anything on their website about setting your own caller id in the system either. (their web account pages). Is anyone here using their own Callerid information through Voxee? thanks

I've tried to create a subroutine that sets callerid name based on number. extensions.conf: ........... exten => s,1,Answer() exten => s,n,GoSub(set-callerid-name,0${CALLERID(num)},1) exten => s,n,Dial(${mainline},60) ....... [set-callerid-name] exten => 0,1,NoOp( no CALLERID num set) exten => 02025462677,1,Set(CALLERID(name) = "Fred" ) ................ exten =>

The asterisk wiki states that it needs SIP, IAX2, IAX and RTP open to the world to work. Is this necessarily true, or does it only need some of these outgoing? I'm concerned as anyone that could guess an extension number&password could use my server to make outgoing calls. It would help if the extensions had a netmask/allowable IP setting like the iax.conf file uses, but there

Hello, I am running Asterisk 1.6 with Realtime enabled for my SIP users and peers. The backend is a MySQL database running through the ODBC backend in Asterisk. At this point everything works in terms of phones registering, placing calls between them, etc. However, I am having a problem setting the Caller ID number whenever I am using the Realtime database for the SIP users/peers. If I use a