similar to: TE110p and E1

Hi, Digium's E400P has RJ45 conector and my E1 link has BNC concetor. Could someone tell me the cable pinouts to make this conection? thanks Eduardo

Hello Im from Denmark and i've just got my Digium TE405P. But i have some problems when i connect it to my E1 connection (ISDN30). My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a serial to rj45) and a 75ohm coax connection. I've tried to connect using the 120ohm with rj45 and a ordinary utp cable. But it dosent seem to work. I've tried several zaptel.conf

Hi, I am new with asterisk. I am setting a Wildcard TE405P. E1s in Italy come in on a pair of RG-59 coax cables with BNC connectors. So I need an adapter/balun http://www.allcomtlc.com/al_g703n3.htm . I have It but I am not sure that It works. I have configured my asterisk in this way: zaptel.conf span=1,1,0,ccs,hdb3,crc4 dchan=16 bchan=1-15,17-31 loadzone=it defaultzone=it zapata.conf

Has anyone implemented an outcall notification when there is a voice message waiting? I would like to have the system notify me of awaiting voice messages by a telephone call rather than an email notification. I would imagine that a call could be dumped into the asterisk spool directory, but I'm not sure how I would monitor for messages waiting. Has anyone implemented such a feature for

I have used 3Com 3c509 nic width bnc coax. I have experienced that these cards used width FreeBSD and Samba is unusable due to speed. I tried to change the 3com card with a NE2000 compatible card, and there was a major change in speed. Has anyone else experienced such problem. Asgeir Stangeland

John R Pierce wrote: > On 3/16/2017 11:12 AM, m.roth at 5-cent.us wrote: >> I'm still trying to find a video capture card that won't crash Dell >> servers, and ran across a Blackmagic BDLKDUO2 DeckLink Duo 2. It claims >> to support Linux. I'm also seeing, in the few non-Blabkmagic or sales >> pages I can find, that they like "binary blobs". I

On Wed, May 23, 2001 at 10:49:54PM -0400, mugz wrote: > > I'm always a bit slow to report bugs i see, figuing someone else will > report it and that it will eventually get fixed. This one has been > somewhat of a problem for a while now. I run Linux Slackware -current and > just upgraded to OpenSSH 2.9p1, but I have noticed this same bug on every > platform and OS running

Currently I am creating .wav files and then converting them via SOX to .au file format, then running them through a gsm codec convertor which all works fine except that it sounds like the recording was made with a sock in my mouth !! Could someone in * land help me to get a good sound quality with gsm format. Thanks in advance. -------------- next part -------------- An HTML attachment

Hello, I have been trying to playback a video file via Playback() in Asterisk 1.8.7.1 but the file format seems to fail. [2011-12-02 18:46:24] WARNING[7665]: file.c:653 ast_openstream_full: File /etc/asterisk/cp-10fps-QCIF-20Kbps.h263 does not exist in any format [2011-12-02 18:46:24] WARNING[7665]: file.c:959 ast_streamfile: Unable to open /etc/asterisk/cp-10fps-QCIF-20Kbps.h263 (format 0x4

Hi, I'm trying to create a clone of a physical Window VM using p2v. My goal is to create a cloning tools VM that has libguestfs tools installed and acts as the convertor. VM conversion works just fine but the conversion rate is significantly slow(1/3) when running inside the VM compared to when the v2v is run on the same bare-metal host. On the host:

********************************************************************** Este email assim como os ficheiros que possa ter em anexo s?o confidenciais e para uso exclusivo da pessoa ou organiza??o para o qual foi enviado. Se recebeu este email por engano por favor notifique Redes@bnc.pt Esta nota confirma que esta mensagem foi verificada pelo MIMEsweeper n?o tendo sido encontrados virus.

A few weeks back I had tried to install CentOS on my old AMD 5x6x (equiv to P75 performance) with plans to use it as my firewall and router. Because there were some problems relating to RPM compile architecture (apparently), I posted and Bryan suggested IPCop, even at peril to his life on these lists ;-) according to him. ;-) ;-) Just wanted to tell him thanks, it's worked out well. Had

Hi, I hope you can help, I am in need of some assistance with the DirectShow filters for Theora. I have successfully created a working capture graph using OGG / Vorbis / Theora, however, when I add a Sample Grabber Directshow filter between the FFDShow decoder and Theora Encoder, this results in the video file being mirrored vertically. I have noticed that the original CaptureGraph was using

Hi Patrick, 2006/4/2, Patrick Beard <p.beard@blueyonder.co.uk>: > Hi Arnaud, > > Just wanted to let you know the the Belkin F6H500ukUNV is working for me > with the fentonups driver. > > http://catalog.belkin.com/IWCatSectionView.process?IWAction=Load&Merchant_Id=&Section_Id=202840 > > I originally tried it with the genericups driver with upstype=7 but this

This is a REAL problem on the way to world domination ;-) PROBLEM: since we moved a MS-Access MDB (16 Meg) to samba, it ist killing queries more than twice a day, loosing records, ... It seems the application has no chance to recognice locked records and inform the user. with smbstatus I get one locking entry for the first user accessing the database (like: DENY_NONE RDWR), the second is not

Hello, i have set up an asterisk sip to h.323 convertor, it is working OK. The only problem i have is this : For example when my identity is 12345@some.domain , and i call a sip number from a sip phone, the called party sees my identity (caller identity) as 12345@some.domain, which is the way it has to be. But when i call from the same phone with the same identity a h.323 endpoint (asterisk

Hi all. I would really like to use Theora for the commercial product I work on... It's a Linux based DVR. Actually we use ffmpeg to produce MPeg4 short clips from 4 BNC channels in CIF resolution. I made a small module for our project that uses Theora... but I see that it gets a lot of CPU :( So I'm here to ask for any kind tips to reduce the CPU usage. - Hardware... do you think there

Hi, I'm trying to build a bridge using a 486DX2/66 with two 10 Mbit Ethernet NICs. The machine (tsushima) is running Debian stable and kernel 2.4.26. Previously I used it as a router, so I know the hardware (NICs) is working. The NICs are as follows: eth0: WD80x3 at 0x280, 00 00 C0 0A 2C 2F WD8003-old, IRQ 10, shared memory at 0xd0000-0xd1fff. eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala

Hey everyone, I like to get the AUTHORS file updated before the next release. I suggest that we add the name and email of anyone who contributed some piece of code to compiz. For people who have contributed such a significant piece of code that it can be considered an algorithm or some functionality (e.g. Mirco's sky dome support in the cube plugin or S?ren's plane plugin), that should

Hi all, as good? I am trying to go up a board TE110P with link E1 ISDN PRI to establish connection with a central office Siemens HiPath 4000. But I am having the following errors: Server1:~ # asterisk -r Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'