similar to: SER NAT any additional requirement

Hi all, Hope somebody can help-I really am stumped as to why this won't work. I realise that this isnt an Asterisk problem (Please dont bash me on the list) and I have emailed the SER list but I havent received a reply and maybe someone on this list can help...Once this problem is solved I am going to use Asterisk for voicemail etc with SER (I have it set up) I currently have SER set up and

Hi, We are testing a SIP solution * + ser solution for a large implementation. All the clients are nated. When a client is dialing outside the domain (to a FWD sip account for example) all is perfect ! ;-) But ,when a call is done to a sip account, the client is ringing, then the caller can hear the nated client very well, but the nated client does'nt hear anything. RTP issue no ? I've

Hi guys, I'm new to Asterisk, so I'm hoping someone can guide me :-) Currently, I am having the configuration as follows : PSTN -> Cisco router -> Sip Express Router -> Asterisk Voicemail I'm able to get the part from PSTN to Sip Express Router working, but I can't integrate Asterisk with Sip Express Router (SER). Basically, SER does all the registering and forwarding

Hi guys, I currently have a sip proxy server (sip express router) which registers the sip phones. I need to add voice mail capability, i.e. sip express router will forward all incoming calls to Asterisk if the user does not pick up the call in 15 seconds. The voicemail recording stops when the user hangs up. However, the recording does not end if the user presses the # key, i.e. it is ignoring

Hello all! I googled lists.digium.com and ser mailing list, but did not find any working configuration of asterisk used as voicemail for SER. This is my config if (uri==myself) { if (method=="REGISTER") { save("location"); log (1, "Registered\n"); break; };

Hi Friends, need to help. *I have problem about sip : SIP/2.0 401 Unauthorized* Is it require to nathelper module in kamailio ? *what can i write kamailio.cfg file when kamailio and Asterisk on same network?* Scenario is like as : ----------------------------- 1) kamailio server on 172.18.100.74 kamailio.cfg ( nathelpler module ) ----------------- loadmodule "nathelper.so"

Hi I am a newbie to * and I am having a problem which appears strange as I did not find any mention of it anywhere in my search. Simply speaking, I have an external SIP proxy server which I am trying to configure for incoming and outgoing calls from my asterisk installation. So here is my configuration in sip.conf [general] register =>

Hi Users, I'm Setting UP the Voicemails by integrating with Asterisk and OpenSER, After 32 sec or 6 ring, it has to go the Voicemail server of Asterisk, In openser.cfg ........... is not hiiting the Asterisk server ............. ... any one help me ........ .... .... modparam("tm","fr_timer",6) modparam("tm","fr_inv_timer",24)

Hi, Following advice in voip-info.org, I could successfully send text to a remote SIP endpoint using sipsak and this command : # sipsak -M -v -s sip:7530 at 192.168.100.123 <sip%3A7530 at 192.168.100.123> -B "Lunch time" warning: ignoring -i option when in usrloc mode timeout after 500 ms timeout after 1000 ms timeout after 2000 ms timeout after 4000 ms timeout after 4000 ms

try "sipsak -M -O desktop -B "foo" -s sip:<user>@<registrar> -H <ip of registrar>" the trick is to specify the "-O desktop" parameter + the "-H <ip of registrar>" parameter. Sipsak fakes the host-header of the registrar so that the Snom thinks it is coming from your Asterisk server, then lets the message through to the

Hi, I've sucessfully completed an Openser 1.3.2 + Mediaproxy 1.9.1 + Asterisk 1.4 + CDRTool with freeradius telephony system. Asterisk is used only for voice mail and redirectioning calls. Every calls should pass through mediaproxy so that i can account them. The goal was to create a simple prototype of what could be a VoIP provider. Now i need to dimensioning this system to work

Thanks Alex, some great ideas. I think, however, I'm leaning towards Asterisk at this point- since I have quite a bit of experience there, and very little with SER. At this point, I'm wondering from a dimensioning standpoint, what kind of capacity my machine will have (Dual Core Xeon 2.4GHz 4GB RAM). As I said, I don't plan to do any transcoding. I read the voip-info page on

Hello, I'm currently using OpenSER as REGISTER server and Asterisk for the call routing. Do i need the OpenSER nathelper module if i want to offer (mostly) automatic NAT traversal to my users or does Asterisk have the same functionality? It seems that the nathelper module should be able to automatically traverse any NAT as long as the User-Agents use symmetric RTP. Further it is possible (in

Hello Masters Here i going explain what Iam doing and where i need help .. Iam running Sip Express Router ,Asterisk, on same box (for testing) my Sip express router is working fine and i can accept global register requests with valid account and in front of Sip express router (SER) Iam using Mediaproxy-1.4.2 which is handler to rtp/rtcp streams between nated clients

No, you don't need a sound card. Do you have ztdummy loaded or zaptel device in your system? Regards, Gus ----- Original Message ----- From: "Chris Hariga" <contact@techselesta.com> To: <asterisk-users@lists.digium.com> Sent: Sunday, October 19, 2003 8:19 PM Subject: [Asterisk-Users] Music on hold... > Hi, > > I need a sound card and mpg123 for music on

Hi all, I have been using asterisk to do such kind of thing, But I must admitt, this is not 100 % conveniant (Mainly because Asterisk isn't a SIP Proxy). I just wanted to know if you knew/used some kind of SBC or packages which would deal both with SIP AND RTP ! SER/OpenSER woulc be a good SIP Proxy ... but then how to deal with RTP ? Any tip, info greatly welcome ! Thanks, JM

On Mac OS X 10.5.2 I run rsync to keep a couple of instances of my / usr/local tree in sync. With Apple's rsync I run (e.g.): sudo /usr/bin/rsync --rsync-path=/usr/bin/rsync -E --progress -avu -- delete --dry-run --exclude=TeXLive-working-copy/ --exclude=context- update/ --exclude=.Spotlight-V100/ --exclude=.fseventsd/ \ -e "ssh -i /Users/gerben/.ssh/id_rsync -l root" \

hello to all, I advice you to not use CDRtool from ag-projects : Fisrt ag-projects talk about is product like a gpl software however they don't provide at least some documentation for non commercial users . try to call them !! i'll offer you some money . You can not Call them for some advices ... It's really a bad product don't waste your time to setup it. this enterprise must

OK, here goes my next problem. I have puchased a DID which I can connect to via SIP I have been given the following details: Username: uka1xxxxxx Password: 1000xxxxxx Server: brxxxx.net:5160 My equipment is Asterisk CVS HEAD on Red Hat EL 3.0 (NO NAT) The other end is a Cisco AS5300 (NO NAT) I can register with the Cisco with no problem. When I dial the DID it sends the call to my asterisk

How exactly to use the tag "Obsoletes:" in a spec file ? I need to offer texlive to users on Centos-5.6, so I packaged it (based on a Mandriva src.rpm), and that works. But I want rpm to *replace* tetex by texlive, instead of just adding texlive, when users do a : $ yum install texlive (we have a local repo here). So I added this line in texlive.spec : Obsoletes: tetex and of