similar to: Fw: IAX2 Softphone Quality & Network Cards

And if you want to use it with windows telephony software, such as answering machine or modem communications software, you can probably take the drivers for the Intel MD3200 based modem, modify the .inf for the Digium vendor and device ID. I have not tried this, but since the MD3200 modem works that way in Linux, the X100P may work that way in Windows. Then you would have a $100 winmodem! Let

Hi all, I have a question that I was hoping someone could answer for me. I would like to find a USB phone that works with Asterisk... preferably one that does not have any issues with NAT. Can anyone point me to something suitable ? We are essentially planning to do a beta for a few hundred customers on our network and would like them to be able to call one another @ no charge. Because

101's for 68.00 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042066051&category=11175 102's for 79.95 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042066389&category=11175 Just passing what I find along.... bkw

Not to sound like a broken record but...... Is there any word on the availability of the FXO cards for the TDM400P? I have an application that would benefit. If it has been dropped please let me know. Thanks Gene Kochanowsky

Digium X100P / new cards are is available on ebay for $43. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309 <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309 > Hope this helps to who want to play with X100P! Are these being sold by Digium ? I don't know ?? - SamW -------------- next part -------------- An HTML

Is this an acceptable machine or does it have to be "rackmount" ? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250111166910 - rh -- Abba Communications Spokane, WA www.abbacomm.net

Did CentOS get an alpha yet How does this one look? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160115818814 will it do the job or not? - rh -- Abba Communications Spokane, WA www.abbacomm.net

Since i'm sure there are others out there in the same position as me, being disappointed that the original T400P and E400P cards are no longer available from Digium, I thought I would pass on a place I found to get them. I needed the older card, since I didn't want to have to get a motherboard with 3.3v pci slots on it.

If anyone is looking, I just ran accross an ebay auction for X100P Cards at what I thought was a very reasonable price. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3046843672&category=48483&rd=1 --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software -------------- next part -------------- An HTML attachment was

http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1284608357

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230492577678#ht_500wt_1076

Hi list... I have to questions. The first i have to mount a medium PBX so i'm looking arround some channel banks at ebay.. So i have some questiones: ? Is ebay a good place for serch? I found one "T1 to 8 FXO and 16 FXS Channel Bank/Multiplexer from Carrier Access" (

This is off-topic for Asterisk, but since echo problems with the X100P cards seems to be a common issue and one which people blame on telco loops, I'd suggest getting the following gear: a 3M Dynatel subscriber loop test unit. The 745 is the one I have experience with, and if you have a fairly decent clue of what you're doing, you can test line silence, resistance, voltages,

Hi, I'm selling a E100P card. (32 channel ISDN PCI interface card. Works great with asterisk). http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5776112128 Michael

Hello all asterisk users! Question: Does anybody know about any good USB handset that would understand SIP and Asterisk and will run with Linux? I have found tons of them, but they are mainly only supported in Windows environment. I would like to set up new phone system in our company that would be based on asterisk acting as PBX and SIP. If you have any suggestions, please let me know. Any

http://www.pcphoneline.com/skype "The VPT1000 is NOT a simple last generation USB phone audio device but is rather a next generation integrated gateway and USB phoneset with simultaneous dual mode Skype and SIP calling support. Skype is not forecast to have "SkypeIn" available until June 2005 but you can have the capability now via its built in SIP capabilities." Is this a

Folks: I'd like to install Asterisk for use in my home. However, I'd like to continue using wireless phones in a couple of locations. The cheapest way to do this is to continue to use analog phone devices via an FXO/FXS box. However, I am not clear on whether I can expect these devices to provide "call waiting" features and caller ID features to the connected analog phone.

Hi all, I've been playing about with Asterisk for years now on and off, just SIP to SIP calls, using FWD and suchlike. I'm moving house at the beginning of September and have decided to build an Asterisk based system for my home office. I'm in the UK and wonder if anyone can give me advice on lines and hardware to use. Had planned to go with an ISDN2e line coupled with a BT

I was looking for something to connect a couple of POTS handsets to my asterisk server and found this on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=162&item=5162868118 &rd=1 The documentation says that it does SIP - therefore will it work in an asterisk environment. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus

I'm looking for an ISDN card that will work for me using either the i4l or capi with asterisk under Linux. I'm in the US, so I need an ISDN-U interface. Can anyone tell me if this card will work for me? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14922&item=6700879965&rd=1&ssPageName=WDVW There are a lot available, and for what seems to be a good price, if