similar to: Caller ID ?

Hello all, Recently I purchased an QuadBRI card from junghanns.net after some playing around, reconfiguring dialplans etc with the exception of 1 thing everything seems to work: I seem to be unable to set the outbound callerid. The dutch telecom operator (KPN) provided me with 4 MSN's on 1 BRI interface. In the past years I'm more then used to setting the MSN without the leading 0, this

Shorewall version 2.2.1 2 Interface setup. eth1: 10.10.1.3 eth0: 192.168.1.2 modem is 192.168.1.1 I need to be able to connect to my adsl modem, but when shorewall is up I get connection rejected. I have added "192.168.1.1 RETURN" above the line "192.168.0.0/16 logdrop # RFC 1918" in "/etc/shorewall/rfc1918" but still getting connection rejected Is there

Hello all, Yesterday I noticed that my system was "leaking" traffic towards the 10/8 network, I have shorewall installed on multiple machines ranging from single interface devices to ones with 10+ interfaces. I tested all the boxes and they are showing the same behavior. All systems are CentOS 3.4, 2.4.21-27.0.2.ELsmp. Shorewall version: 2.2.1 For the host mentioned is a single

Hello all, Recently I migrated all telephony in my house to asterisk thanks to the Asterisk, QuadBRI which works wonderfully well. Some small tweaks to make but that's on the long list. On the short list is the ability to reliable send and receive SMS. For SMS I already built a script email2sms, but sometimes the SMS doesn't get send from some reason, the sms log then reports something

Hello Tom, I am not sure if you can help with this but I am at my wits end. If you hit this site and do a force refresh (ctrl + F5) the site will time out and lose connections. Do the same on port 443 and it does not time out??? The web site I am reffering to is www.tituswill.com I think the only problem is port 80. Do you have any idea how to diagnose this I have sent a dump of just

Bit of a shorewall newbie so if the answer is obvious please be gentle. We have been using version 1.4.2 for a while now and are very happy with how it performs, however we are looking to increase the resilience of our internet connection by providing a second internet feed. The idea being that should the primary connection fail shorewall will transparently (as far as users are concerned) switch

Hi, I have shorewall 2.0.8 installed on a linux box. Recently I moved to a setup with a front/back firewall With shorewall acting as a front firewall and M$ ISA Server 2004 acting as a back firewall. I turned all ''intrusion alerts'' On at the ISA server expecting not to get any since shorewall should block everything. Now to the problem: I am getting quite a few alerts

Hi there, I''m not sure if I can do this with shorewall, but any points on the right direction would be of great help... I need to have a LAN with access only enabled to certain set of computers. I was planning on having the dhcp server just give IPs to certain MAC addresses, but if a smart guy configures his computer manually with a valid IP for the LAN he can get access to the LAN

We have a webserver that is connected to three different networks. Due to our cabling, we have to run two of those networks over the same physical network. When connecting from OS X and Windows we are occasionally blocked because the client is sending to the wrong interface. Linux clients seem to have no problem at all. I have read the docs and understand that the problems exists because of

Hi, I'm running * 1.2.7.1 on Red Hay 9.0 w/ a TDM 400 2 x FXS, 1 x FXO. I'm using a VTech cordless that makes three short beeps when someone another extension is picked up, presumably this lets you know if someone is trying to listen in.. Everything works, except the VTech now makes the three beeps everytime you try to use it, even if another extension is in use. It seems as though the

Can anyone recommend a good cordless user-configurable SIP hardphone that is readily available in the states and doesn't cost $300? There seem to be a plethora of decent and affordable corded phones (like from Grandstream) but the search for a cordless unit seems elusive. I purchased a vtech 8100 online only to discover after receiving it that it is locked to vonage service. Thank you.

Ok, I've done some more research and I don't think I want an FXO box... What I'd like to do is use BroadVoice (with their BYOD plan) and then run Asterisk on my WRT54G router. I'd also like to use my regular home phones without having to use a special "SIP" phone... (eg. I like my Vtech normal cordless phones) What do I need to buy to get this working? It sounds like I

hi, it''d be very useful to add some kind of "log everything" option to shorewall. currently the logging is useful if you know what you would like to log. but if you don''t know than it''s a problem... another problem that currently it''s not possible to log the nat table. at least i can''t find any way (can''t add logging into masq and

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Basically, pretty much all the 2 line cordless systems I've seen come with a built in digital answering system that I'll never use, the main problem with this is that these units don't support VMWI (visual message waiting indicator) with telco supplied voicemail. This is a problem because I'll be setup an Asterisk system in the next month or so to handle my 2 analog and 1

Hi all, I was excited to see the announcement on the list regarding the fix for the echo problems on Digium FXO cards! I have 2 X101P's, TDM400P with 4 FXS modules and couple of XLite softphones. A few months back,I had gone thru the recommendation on the list to remove echo from the SIP phones(I never did have any echo on the TDM400P FXS phones), and had removed about 90% of the echo.

I have Asterisk voice mail setup locally. It works great, I'm impressed! Some details about my system: I'm using a TDM22B card to interface with both the PSTN and a VOIP provider. I'm running 1.2-beta from CVS. I have a regular VTech phone plugged into one of the FXS ports. Asterisk is able to indicate when a local voicemail message is waiting via the LCD display of my analog phone.

Hello I got about 20 different people using 20 different PC''s in my Lan. Five of them should have unrestricted access to the internet any time of the day. Yet the rest of them should only have access at certain timeframes during the day. Two of them should have no access at all. I am well experienced in writing rules (for the rules file) that make all this possible, yet i was

hi all, can someone help explaining what we are seeing? it makes no sense to us. this is a host running centos 7.4 with 3.10.0-693.17.1 kernel, and it has 192GB of ram > [] free -b > total used free shared buff/cache available > Mem: 201402642432 14413479936 75642777600 48586752 111346384896 185689632768 > Swap: 21474832384 31961088

On Tue, Jan 2, 2018 at 10:10 AM, Akemi Yagi <toracat at elrepo.org> wrote: > > On Thu, Dec 7, 2017 at 6:23 AM, Stijn De Weirdt <stijn.deweirdt at ugent.be> wrote: >> latest kmod update 20-15.el7_4.6 is broken on our systems, while >> previous 20-15.el7_4.4 was working fine (and downgrading fixes the issue). >> >> the issue is with modules from mellanox