similar to: OT: Are you using a Lucent?

we're evaluating the use of a Lucent APX8100 E3/SS7 to SIP gateway for use in conjunction with asterisk, serving something like 4000+ lines. does anyone have experience with the APX8100 and it's integration with SIP on asterisk ? does the APX8100 handle SS7<->SIP signalling well enough to be used ? any anecdotes would be well appreciated. -- Regards,

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

Is anyone using a media gateway with a DS3 for TDM/PSTN access? I am trying to determine the best way to scale Asterisk beyond 4 PRI's. What about the TNT Max? Can it be configured with a DS3 PSTN interface, the appropriate software and hardware, and Ethernet ports to support SIP-PSTN/DS3 media gateway services for multiple * boxes? What about TNT - SER - * ? Is there anyone here with real

I've posted this before but before it was just wishful thinking. But now it has become a real need. Our boss has a 5 year grudge against Lucent. They had a Lucent here that would simply stop processing calls. No alarms. No nothing. I'm sure that in 5 years, new software has been released. I've got another guy running several AS5400HPX's telling me that you can only do about

We have install a DS3 with 28 DS1's we have an Adtran MUX breaking out the DS1's, we are trying to setup the system with 2 dchannels for each 4 DS1's. Everything looks fine when modprobe zaptel and wct4xxp and ztcfg -vvvvvv but when I asterisk asterisk it says: Aug 10 16:33:32 ERROR[8954]: chan_zap.c:6750 mkintf: Channel 24 is reserved for D-channel. Aug 10 16:33:32 ERROR[8954]:

I'm running SIP between my Lucent TNT acting as a gateway, and an asterisk server. We have a PRI coming into the Lucent. Basically the problem I'm having is mostly on inbound calls but some outbound calls as well. I hear echo and sometimes some weird artifacting on calls coming in from the lucent. Everything routed over IAX to VoIP Jet or Nufone sounds fine. It seems like every 3

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

I'm looking for someone familiar with setting up some of the more advanced features of the Lucent TNT, preferably someone with knowledge of Trunk Groups and choosing outgoing PRI channels based on call type and perhaps NPA-NXX We currently have 8 PRI's. 7 of them are for our dialup pool, the 8th is for our voip. We currently run the dialup PRI's to a seperate TNT We want to

Yep anything over $7k makes it more feasible/reliable to go for multiple server multi-card solution. Cheers, Dean > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of izo > Sent: Thursday, 2 June 2005 8:21 PM > To: Andrew Latham; Asterisk Users Mailing List - Non-Commercial Discussion >

Hello folks, I've been trying to get T.38 over SIP working with calls terminated by a MAX/Lucent/Ascent TNT. As far as I can tell, SIP and T.38 are actually working perfectly; however, I can't get the TNT to properly terminate a FAX call. Does anyone have a working configuration for SIP and T.38 for calls from a TNT or APX? Here's a brief description/diagram of my test setup:

I have a customer installation with an Adtran DS3 mux. The DS1's go into my Asterisk servers that run IVR/Call recorders. The DS3 provider is Qwest, and they tell me that they routinely drop the DS3 service to redundant back-up's and that this is a common practice that happens thousands of times to DS3 lines daily across the US without any service interruptions. They say that the

In reference to an old post from 2002: http://www.marko.net/asterisk/archives/0203/0103.html How does one go about doing this? Also, what is the present status of the OpenSS7 stack in Asterisk? What can it do now? And is there any possibility in the future of developing a DS3 card for it, if only for the purpose of mostly DACSing? Which is still a level of intelligent call control on the

Hi everyone, We have been working with Asterisk for a while now and would really like to expand its capabilities by fully integrating it with our Definity g3si and are wondering about other peoples experiences with similar setups. Thus far we have only been able to achieve a partial 1 way integration, but ultimately would love to route inbound voip calls to the asterisk out of the lucent.

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

Hi list, Ive got a server with 6 ports on it (4+2 port card) we have a DS3 delivering all voice DS1's to us. Carrier has a trunkgroup for the first 8 span (we only have the first 6 plugged in right now). Everything works fine until we fail the primary D channel (D's are on 24,48) the secondary then picks up and outbound calls do not work, if we reboot Asterisk the D on 48 comes up and it

Any know what Digium hasn't released the DS3 card? It was supposed to be out a while ago. -Matt

Hi All, We are trying to implement a DS3 capacity calls (672 concurrent calls) using asterisk server. I wanted to ask are there any compatible DS3 cards with asterisk? I tried searching a lot but could find DS3000P from digium but unable to get this product. Does anybody have any idea of having any DS3 card in asterisk box so as to handle around 600 calls? Thanks Sandesh -------------- next part

I have a T3 coming from my carrier. From there I want to use an Adtran mx2800 T1 Mux to break the T3 into 28 T1/PRI which feed into seven quad T1/PRI equipped servers. Everything seems very straight forward with the exception of the D channels for the T1/PRI. I am not very familiar with large circuits such as T3s. I know that I can use one D channel per set of quad port on each server. So if

I've read the wiki and other resources on how to connect Vonage / Voicepulse and all these other services to Asterisk... We are attempting a connection to a Lucent iMerge. Lucent has told us that it won't work - but we feel confident that it will. Has anyone worked with the Lucent iMerge - or would be willing to help lend a hand? It is capable of H323 / MGCP. Even if I could make the

Obviously, there are no DS3 TDM cards that are currently compatible with Zap channels. (or are there?) Does anyone know of an inexpensive DS3 card that could perhaps be used with Asterisk if one were to try to port the Zap drivers to such a card? PCI, of course, would be the bus of choice. I think there are quite a few discouraging comments to be made on that question. Firstly, most