similar to: SIP trunk rollover problem

Same thing here. I had this problem awhile ago and made this workaround. Going to another trunk does not work because they are answering and not sending a error code. If you are using AAH code then this waits 10 seconds on your Voip then times out and goes to PSTN. You can modify for your needs The pertinent line is 14 in macro-dialout-trunk I am going to clean it up and repost under my

I want to say thanks to everyone for the help so far. I figured out a way to modify some AAH code that worked for me (well sort of). The line I modified is s,14 in macro-dialout-trunk. Then I just added a variable and passed it from 9_outside. I just have one last problem. This waits for an answer not ringing. So if the called party has a long ring to voice mail the call is dropped and goes

I'm having trouble getting outbound calls going with aah 1.3 and a tdm400p w/ 4 FXO. Incoming calls work fine, outbound I get this: -- Executing SetVar("SIP/231-af2b", "OUTNUM=6643955") in new stack -- Executing Cut("SIP/231-af2b", "custom=OUT_1|:|1") in new stack -- Executing GotoIf("SIP/231-af2b", "0?19") in new stack

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

I currently have: Telco-PRI ---- Panasonic DBS576 PBX ---- E&M wink T1 ---- Asterisk. I have configured the Panasonic to forward my Asterisk DIDs to the Asterisk extensions over the T1. I do not get DID nor CID on the Asterisk, so I want to use PRI between the PBXs. I do not want to pay for another PRI card for the Panasonic. (T1 and PRI are different cards) I see this as my least

How many times do you ask for help here before getting a respone? Every single thing I do No matter what I get busy extensions. I am willing to pay someone to help here. Anybody got a clue? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d0d1326c/attachment.htm

Hi All, in regards to my previous queries about call transfers not working from inside, several days of searching turned up this posting: I got this to work by editing the line exten => s,14,Dial(${OUT_${ARG1}}/${OUTNUM}) to say exten => s,14,Dial(${OUT_${ARG1}}/${OUTNUM},,Tt) in extensions.conf seems like many people have had this issue in the past, I guess it's AMP related, as

Hello, I have a TDM400 and currently have 2 of the ZAP Trunks configured on it. Zap/1-1 and Zap/2-1. I am Running Asterisk@home Version 2.4 with AMP version 1.10.010 In my Outbound Routing I have the Trunk Sequence set up so that 0 is Zap/1-1 and 1 is ZAP/2-1 What I see is that when Trunk Sequence 0 is full, it does not open Trunk Sequence 1. I have found that this is true even if I

Hi Guys, I'm having sound problems when diverting a call using asterisk@home 1.5. I am using the following configuration in extensions_custom.conf, extensions_additional.conf and extensions.conf [custom-Sales] exten => s,1,SetVar(DivertNumber=02XXXXXXXX) exten => s,2,Dial(SIP/116, 15) exten => s,3,Goto(outrt-010-outside3,9${DivertNumber},1) (i have replaced the diverted phone

Dear All, I have an asterisk server version 1.2.12.1 along with trixbox and I am having this nasty problem, I have a TE200P and have an E1 pri attached to it and zttool says it's OK, I have configured the whole 31 channels into one group as follow: Zapata-auto.conf: callerid=asreceived signalling=pri_cpe switchtype=euroisdn context=from-zaptel group=0 channel=>1-15,17-31

Hi! I have configured a SIP trunk with a dialing rule. The trunk behaves normally for incoming calls but when in used for outgoing call a strange thing happens. When I place a call I cannot hear the tone confirming that the remote phone is ringing. I simply hear the voice as soon as the party picks up. When the remote phone start ringing Asterisk receives a SIP packet stating that the call is

Hello, I have *@Home 1.5 installed and all is working fine for incoming calls and sometimes outgoing calls. Installed in the box is a digium TDM04B (4xFXO Ports) setup as ZAP1 to ZAP4. I have incoming calls coming in on lines 1-4 in that order and outgoing calls prefering ZAP4 then ZAP3 then ZAP2. When i try to dial out to the PSTN from a SIP phone it sometimes works (normally after a reboot)

I've a call center using IAX softphones provided by a third party. We've observed problems where the IAX phones seem unable to use our PRI trunks. A sample anonymized call is provided below with the PRI debug calls embedded. Any thoughts, comments or suggestions would be welcome. In anonymizing it, I preseved the format and number of digits sent. -- Accepting AUTHENTICATED

Hello everybody, and first of all sorry for my poor English. I'm having trouble with Quadbri installed on Asterisk 1.2.17-BRIstuffed-0.3.0-PRE-1y-e. Everything is working fine, except calling to switched off or "out of coverage" cell phones. In this case I have to wait 40 seconds until Asterisk tell me that "all circuits are busy now" instead of receive cell phone

Hi, I use: Trixbox-2.2.4 FreePBX-2.3.1.0 Asterisk-1.2.17 BRIstuffed-0.3.0-PRE-1y-e Zaptel-1.2.19 ..with two ISDN cards, often but occasionally the dial out failed but is possible to receive external call. My zapata.conf conf is: [trunkgroups] [channels] language=it context=from-pstn signalling=bri_cpe_ptmp rxwink=300 pridialplan=unknown prilocaldialplan=local switchtype=euroisdn

I have call center PCs that switch between an IBEAM SIP softphone and a NEBU IAX softphone (for reasons that aren't germane here). The SIP softphones work fine, but the IAX softphones get a fast busy unless I give them an IAX trunk to use, instead of the PRI trunks that all the other phones are using. I am using Asterisk 1.2.3. svn rev 47264. I've appended a sample call trace. The

Hi, We are using VOIP-SIP gateway to route outbound PSTN calls. Recently, I am getting == No one is available to answer at this time message, after making 5 SIP attempts (Retransmitting #5 (no NAT):), and the calls are going out through alternate Zap-trunk. I do not see any hit (sip-debug traffic) on the voip-gateway for the failed calls. Strange thing is that this is happening randomly,

Hi, I have some problem to get this setup working. I have a CAC Channel Banl I, with FXO and an Asterisk box ( I am using Asterisk@Home 1.2) and I have a TE110p installed in this box. What I want to do is, just to be able to dial one of those lines that already are connected to the channel bank, and transfer that call through TE110p and Asterisk to a user agent somewhere through Internet.

Hi, sorry for the long debug output below. I configured Asterisk with AMP to send the whole number including the extensions of the callers to the called party. Whatever I configure in AMP it looks like it is used, In my eyes it is ok, but doesn't seem to work. 033811234451 is the call id i configured, and it seems to use them, but the caller will only see a 0338189040 instead of my

Hello, Sometimes the call gets answered for 1 second, but actually the phone has not rang, it?s just the CDR, and asterisk hangup automatically, I cought the log of 1 call like this, I hope you can help me with this. My setup is : <vendor> ----SIP--? <Asterisk> ?----IAX2---? <Asterisk with Dhadi channels> Here: -- Executing [966505103150 at from-internal:1]