similar to: static noise with this hardware any advice

Dear all, I have some troubles using the stemming algorithm provided by the tm (text mining) + Snowball packages. Here is my config: MacOS 10.5 R 2.12.0 / R 2.13.1 / R 2.14.1 (I have tried several versions) I have installed all the needed packages (tm, rJava, rWeka, Snowball) + dependencies. I have desactivated AWT (like written in

I have been hearing a lot about the new Gnet SIP phones. Is anyone using them? How do they perform? Sean

I am having a problem with and Asterisk installation where two ports connected to a TDM400 card will have a very loud noise when you try to dial. The server has an OpenVox D110P, a TDM04B and a Xorcom Astribank 8 fxs. It is running Zaptel 1.4.11 and Asterisk 1.4.18. The problem always happens with two ports (34 and 35) which are connected to two GSM gateways. They will work fine for a week

Hi: I have one TDM40B and one TDM04B on my Asterisk box. Both were working fine. Then, all of the FXS ports started to make echo sounds when I make FXS to IAX or SIP connection. All of the FXS ports fail to make bridging to the FXO channels. And when I try to make a call from the console to the FXO ports, I only hear static noise. Any suggestions about the source of the sudden change in

FYI... Just installed one of the new Sangoma A200D analog pstn cards with the hardware echo canceller on a trial basis. The card has four fxo interfaces. Excellent audio quality, excellent echo cancelling, and excellent audio levels. The four pstn lines at this location are rather long analog loops that have rather long echo trails. I started with a pair of x100p's a couple of years ago,

Resent! Rgds, Nick CHI Regional Technology Team, Regional I.T., I.T. Asia, Manulife International Limited Tel: (852) 2510 3273 Fax: (852) 2510 0244 Email: Nick_Chi at manulife.com ----- Forwarded by Nick Chi/Asia Division/Manulife on 10/31/2003 09:56 AM -----

Hello, I''m porting one project to centos where we use gnet and gio libraries. Will be these libraries part of centos in future? I''m not sure what relationship is between these libraries and glib. Regards Ondrej Filip

Hi; One of our OSTs filled up. Once we realized this, we executed lctl --device 9 deactivate on our fs''s combo MDS/MGS machine. We saw in the syslog that the OST in question was deactivated: Lustre: setting import ufhpc-OST0008_UUID INACTIVE by administrator request However, ''lfs df'' on the clients does not show that the OST is deactivated there, unless we *also*

Hi! I'm sorry for the slow response on this, hopefully someone else was able to help out with this? If not let me know and I'll look into re-activating it. I certainly think I would have remembered de-activating you myself if you had done something wrong, so I have no idea what happened here. On Fri, 2023-02-24 at 17:58 -0800, Michael de Gans wrote: > My freedesktop gitlab account?was

Hi, I'm in the process of adding support for Markdown to a minimal CMS in Rails, [Railfrog][railfrog], which uses mime types to select appropriate processing. I have had a look through the archives but have not been able to see that a consensus has emerged as to what such a mime type for Markdown should look like. My reading of the RFCs suggests that it should be within the "text/*"

Hi, A week or so ago I wrote about the problems I was having using a Digium TDM04B card in a Dell PowerEdge 750 IU running Fedora Core 1. Digium steadfastly indicates their card won't work in any PowerEdge 650, 700 and 750 series machines "do (sic) to a failure in interrupt handling between the pci bus and the card." My question to the list is: for those of you using a TDM04B

Hello all, I've began writing the parsing section of the spec, and I though I'd let you know about where I'm heading with all this. Basically, parsing is defined as three consecutive passes: parsing document elements, parsing block elements and parsing span elements. Each pass is going to contain a set of rules the parser should attempt to match while parsing the input. Rules

I am having a problem with a couple servers. They both have a Digium TE110P and a TDM04B card. I have setup the system so the TE110P uses channels 1-31 and the TDM04B 32-35. The problem is that when we reboot the server sometimes the TDM04B is recognized first and the TE110P second so the configuration fails. I do not know why this happens and to solve this I have to do a "service

I would like to install a TDM04B with Asterisk@Home 2.4 and Asterisk@Home 1.5 but I didn't find documentation about this installation. Thanks in advance, Nelson -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060206/85ff5252/attachment.htm

Hi, I recently got a TDM04B and after installing and getting asterisk up and running I connected a handset to one of the ports. Unfortunately I don't get a dial tone when I lift the handset. What could be the cause of this? Could someone point me in the direction of a proper config for a TDM04B? Thanks.

Hello All, I got my TDM04B card installed and configured. Everything works fine I can receive calls and route to appropriate extensions. The only problem I am facing is Slowness. When I dial the PSTN number which is connected to Zap 1-1 after two ring it answers and then run the AGI script. What I did was assign it to a specific extension. So all inbound call on that PSTN number should

I have a client who wants a Meetme box with 12 FXO ports, to connect to Analogue lines coming from an Ericsson PBX. It looks like I could do this with four different hardware configurations: a) three TDM04B cards (based on TDM400P) b) one TDM04B and one TDM808B c) one TDM804B (or TDM854B?) and one TDP808B d) one TDM2403B (half filled TDM2400P) Apart from considerations of cost and PCI slot

On Wed, 27 Mar 2019 13:00:42 +0100 Franta Hanzlík <franta at hanzlici.cz> wrote: > Yes, is no difference between '-UAdministrator' and '-U > Administrator'. But it seems, as ldbsearch in 4.9.5 is different than > 4.9.4-. (I was furious with that, because I found lot articles on > net, where -U _username_ was stated. > > My ldbsearch is from pure

Hi all, I've struggled for several days trying to get a Digium TDM04B 4-port wxfco card working on a Dell 1U PowerEdge 750 machine running Fedora Core 1. I finally got a call back from Digium who indicated that there is a fundamental conflict between the card and the PowerEdge having to do with PCI interrupts. Asterisk version is stable v1-0 12/29/04. The symptoms of the problem were as

Hi, I want to use four independent variables to predict the output of one dependent variable using a linear model lm. I want to compare all possible combinations of the 4 independent variables, including singles, pairs and triples. I was thinking of using the AIC test to compare all models and pick the best one. The model looks like this : lm(Y ~ X1 + X2 + X3 + X4) Thanks for your help