similar to: SIP "agent" phone w/ headset

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them

I've done a bit of searching and haven't found any good reference for this, so I figured I would ask the group next. Being new to Asterisk, we've been sucessful in figuring out most configuration items, however we're stuck on one thing... Using recent Asterisk stable, we have a situation where I have an analog door phone which, when the button is pushed, simply off hooks the line

Hi there, Do anyone have any experience with SIP phone that support a headset ? We have Budgetone phones but we need headsets. What would you advise ? Thanks Thibault

Hi, I've been asked for a headset recommandation for Polycom SoundPoint IP phones. Since I believe they use a pretty standard headset jack (correct me if I am wrong) it's really a general recommandation on headset. Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi folks ! I bought two sipura 841 phones. I used to have GN Netcom headset which I connect instead of the handset. The problem is that I don't have any sound coming out the headset and I can't speak neither ! I'am located in France and I was wondering if the cabling in the sipura and in the headset is the same (I mean the order of the cables) or maybe is there something else to

All, I have AAH 1.0 installed using Digium TDM04B and Grandstream GXP2000 phones. All seems well other than the phones have to be reset up to 5 times per day. It is like they lose thier ip connection or maybe thier SIP connection. Has anyone else experienced this issue? I have the phones set for static IP addresses and that doesnt seem to help either. Any help would be greatly

I'd like to get some feedback from users of USB headsets as to what they like/dislike about the unit they own (manufacturer/model number). I'm looking to buy some. Is there already a thread somewhere or a review (I tried to find one with no luck), discussing this topic? Any advantages/disadvantages to using a USB headset over a regular headset slaved off the internal sound card?

Hello, I'm having the following problem when using a headset on XP connected to an on-board Realtek soundcard on an AsusTek M2N68-AM Plus motherboard: - Using any sound recorder (Windows', Audacity, XLite), the level is just too low when speaking at a conversational level, even with the microphone level pumped all the way up (line displayed totally flat in Recorder)

Wow. My message made it to the list after more than 3 hours. Philipp -- amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de Let's use IT to solve problems and not to create new ones. Asterisk? -> http://www.das-asterisk-buch.de Gesch?ftsf?hrer: Stefan Wintermeyer Handelsregister: Neuwied B 14998

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everybody :) I am a new member here and hope that someone gives me a hint for my problem: Let's say I am at work and my SIP phone (KPhone in my case) is connected to my private Asterisk. I want to call my wife at home so her SIP phone rings. She does not pick up the phone (maybe she is somewhere in the house and has to run to the phone) so after 15 seconds her cell phone should ring.

I have been looking for analog phones for my * system that work with our plantronic amplifiers and headsets. The problem I am having with the Aastra phones that I have purchased (PT-390, 9116, 9120, 8009 ), is that they don't seem to stay hung up unless you physically hang up the handset everytime you finish a call. I have even purchased the Aastra 9120 which sais it has on-hook

Sorry, I know it's OT, but does anyone know of a relatively inexpensive headset that is compatible with the Cisco 7960? I've tried the headset off Norstar phones, doesn't seem to work with or without the amp. ------------------------------------------------------------------------ | nate carlson | natecars@natecarlson.com | http://www.natecarlson.com | | depriving some poor

I have sent a few emails over the past couple of days that simply have not arrived on the list (or so it seems). Is anyone else encountering this ? Julian

I would like to hear stories from people using TAPI, CTI or CallerID software with Asterisk. What are you guys using, setup examples, etc. Has anybody sucessfully integrated SugarCRM with Asterisk and how did you do it. Are you running callerid software? Did you stumble into problems like using tapi and callerid software returned both the callerid and calledid? Hope you can help me out with

How do I make my headset work. Before I try it with anything else, I'd like to make it work with arecord and aplay. VLC and movie player can make sounds with my external speakers. though not in my headset yet. I've got an insignia NS-PAH5101 headset. As directed, the red connector is in the pink spot and the green connector in green spot in the back of my computer. arecord folloed by aplay

Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables

Hi, I have a Cisco 7960G phone for which I know the pinout of the headset socket. I have a couple of standard telephone headsets which I do not know the pinout of. I'd like to connect the two. If I have the pinout of a normal/standard headset I can rewire the ones I have to match the cisco. Thanks Mike

Hi, Do you if a DECT-GAP (or DECT-CAP) compliant handset MUST or MAY support roaming and handover and are these functions transparent for handset (then, these functions are implemented in DECT base stations) ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080110/4254f602/attachment.htm

I would like to have asterisk pass along the caller ID phone number to a database server on a my local network (the same network that the * server resides on ) so that our customer service app. can pull up customer data automatially. Asterisk passes along caller ID to the phones fine, can someone tell me how to make it pass this info to my database server? Any suggestions would be greatly