similar to: quad t1 / 1U rack server combos

Juan, I am running a Calling Card application on a Dell PowerEdge 2850 with Asterisk 1.0.7. Recording conversations I have seen on my server causes the processors to burn more than necessary so I would recommend what William from Signate recommended: " Consider saving recorded calls in a database on a separate server. It will be simpler to build a retrieval interface that does not

Good day all Is there someone that's got asterisk working well with a A101/E1 card Apparently they don't have RBS support? Please advice Thanks Altus

Hi Guys, Im planning to purchase Supermicro server but I dont have idea what Motherboard and chipset model will work with TE406P.I read one post here that the chipset should be Intel E7520.Is it true?Is there other recommendation?My requirement by the way is to handle 1000 simultaneous calls. Does dualcore xeon (single cpu) and 2gig memory can handle this w/o

What would be the simplest way to retrieve information form a CNAM database that provides http based query responses? Does an application or script already exist that does this? Basically, I want to do a wget of a URL that contains the callerID number as a variable, and assign the returned text to another variable which can be used to set the caller ID name. Any suggestions?

Guys. Anybody using supermicro mobos and chassis with TDM cards? I would like to know which models are you using (mobos and chassis and also CPUs) and how many TDM cards have you been able to put in without having IRQ issues like in other cases. Ive read supermicro servers play nice with asterisk but it is always good to ask I guess. Thx! AK

I just implemented a system using a TE411P hardware echo cancellation card. Per Digium, I setup zaptel.conf, and zapata.conf the same way as I always have. To my surprise calls out to the PSTN had a terrible echo. 1 - 2 second delay, and quite clear. The echo was so bad that I had to remove the hardware echo cancellation module from the card. We are only using the 1st span of this card right

Hello all I'm trying to get my asterisk config to listen to multiple ports. This is since some clients have port 5060 blocked by their ISP. Does anyone know how to do this in sip.conf or if it is even supported? Thanks!

Can anyone point me to a reference or sample config for bypassing a nailed up (point to point) t1 between two PBXs with asterisk and a pair of t1 cards? Right now I have 2 Nortel norstars connected to each other via a leased line t1. I also have a solid 10mbps low latency microwave link between the 2 sites. My goal is to run an asterisk box at each end with a t1 card and Ethernet card to

I am using realtime mysql for extensions, sip, and voicemail. Outbound call routing does not really perform well in realtime extensions due to the high number of rows in the database (300k), so I can not use it. It appears with my limited knowledge that the query method is not robust enough for large databases. Given the fact that I already have realtime and mysql configured, what are my options

Can anyone point me to a sample or information on using MeetMe like this? Conference room is set up with 2 PINs, one for the moderator and one for the participants. Participants get music until the moderator joins (to avoid wild, un-moderated tangents). Call is ended and all participants are kicked out when the moderator leaves (or the moderator can kick everyone out via phone keypad).

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

Guys. I know there are wifi sip phones out there but I have a question, are any of these phones "anti explosive"? By that I mean, there are certain regulations about phones or cel phones that are not recommended to operate in environments like gas stations due to sparks and the chance of ingiting gas fumes. Are there any wifi sip phones out here that have complaince with regulations to

Is there a way to get * to use wav files instead of gsm files for the voicemail, agents, and queues applications? Gsm does not give all the quality we would like to have, and we use no low bit rate codecs.

I am looking for a good analog desktop phone to use with asterisk and my sipura ATAs. I know I want Caller ID, MWI, a few programmable buttons (for asterisk features), and no external power supply (so my users can dial 911 through the SPA-3000 when the power is out). I spent some time looking at the phones at Fry's today, without finding exactly what I need. Do any of you have any

Anyone know of any equipment that I can use to connect a laptop running asterisk to a POTS line (RJ11) ? Regards, Dovid __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Does it make sense that a system with a single PRI (sangoma card) would loose its ability to play sounds when not connected to the PSTN for clock? Is there a way to configure ztdummy as a BACKUP clock source, or is there a better way altogether? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Looking for someone with a successful experience similar to this; I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but over a long distance. We do not need any IP connectivity and the solution requires G.711u audio so there is no benefit to using IP. Has anyone here successfully cross connected any PBX PRI interface expecting NI2 PRI signaling B8ZS/ESF with an

OK... maybe I got a little anxious and ran out and bought a Tyan GX28 with dual Opteron (dual core) processors. (It is a nice server ;) ) I did neglect to find out that you can not manually set the IRQ's on this motherboard. I am now stuck sharing an IRQ with the ethernet controller and no foreseeable end to my dilemma. I have a Digium TE210P and zttest consistently runs at 99.97% which

Has anyone had success with the TDM400 in production? I have multiple boxes where these cards lock up and the only thing that will fix them is to unload *, modprobe -r wctdm, modprobe wctdm, load asterisk. Does not matter if it is a FXS/FXO module. I know this topic has been discussed many times before, but my questions is not "is anyone else having this problem" since I know that

Whoo hoo! I just received my WIP300 from voipsupply. I have to let it charge before I can play with it. A few quick comments: - I started a Wiki page at voip-info to post issues, firmware news, etc. I really like the wealth of info on the GXP-2000 page, so I wanted to start something similar for this phone. http://www.voip-info.org/wiki/index.php?page=Linksys%20WIP300 - My kit