similar to: Call waiting beeps

Hello, hoping someone out there has some ideas - I have a VOIP line that has call waiting. It is terminated at a Sipura 3000 and the POTS side of that device connects to an FXO port in my * box. I also have a POTS/PSTN line that terminates in another FXO port on my * box. There are two FXS ports which feed cordless phones. I'm using the Zaptel TDM400 card. This gives 2 extensions + 2 lines

During some calls, and during the playback of some messages (that people leave), I have audible beeps... I don't know if the other party can hear them, but I sure can. What is that? Also, I currently have 2 x100p (single fxo card), I have read that they tend to have a lot of echo problems, but that the new 4 port fxo card does not. Can someone verify that for me? I am looking to upgrade

Asterisk 1.2.4 FreePBX 2.0.1 I am running a TDM400 card with 3 FXO and 1 FXS cards. During most all calls, there are random beeps in the background. The other party cannot hear this (I believe since they haven't said anything). This will happen when people leave voicemail, and also on most or all calls. I am running Polycom IP 501 phones. The beep/tones are not DTMF. It does not happen

So, just today I noticed a problem with kernel 2.6.18-194 (CentOS 5.5) on several Intel DP965LT systems; the system beeps (such as terminal beeps) are no longer passed through to the external speakers. This is a problem because in our situation the boxes are distant from their monitor/keyboard, the system speaker on this motherboard is extremely weak, and there are no system speaker header pins

Is there anyway to turn off the call waiting beep in the grandstream and/or cisco ata186? I have a dial statement in my extensions.conf that rings 5 phones at the same time by combining them with the & in the dial statement. i.e.) exten => blah,blah,Dial(SIP/GS1&SIP/GS2&SIP/GS3&SIP/ata186a&SIP/ata186b,25,t) If one of those lines is being used, then the user gets a really

Hi, I have (to me) an interesting problem. There are 3 physical extensions, 11, 12 and 13. All hang off Sipura adapters. There is also extension 10 which simply uses 'Dial(SIP/11&SIP/12&SIP/13)' to call all phones in the house. Incoming calls from outside get sent to 10 in order that they can be answered from any phone.. Now - if (say) 11 is on a call externally, and 12 calls

Hello All: I am very new to R and am trying to import some (107) text files into R while simultaneously manipulating the data into a structure that I can use. Below is a description of what I am trying to ultimately accomplish. However, I find that I am unable to even read one file into R using the read.table function. I get the following error: > test<-read.table("test4.txt")

> When you carry out tests to ensure that the setup is working well, you will pull the power cord from the wall and wait until the UPS reaches LB. This means waiting and wasting time. You can speed up the testing by setting LB very high so that the UPS reaches it quickly. Later you can set a more reasonable value. After the first test and the NAS is restarted I had to change the setting

I have been looking for the answer to this question for a while. Google-ing and reading the archives of Asterisk-Users has not enlightened me. It seems that this question has been asked many times, and many times it has gone unanswered. I have call waiting and three way calling on my PSTN line from Verizon (the local telco). This is connected to a FXO port on a TDM400P. I also have

I had a similar issue with sending a flash to the PSTN for call waiting. I found that my dial plan in the extensions.conf file was not allowing me to dial *xx. Once I corrected my dial plan I was able to dial *0, *69, *78, *79, etc. Training the wife on how to actually use it was an entirely different issue. I have not tried to enable 3-way calling via the PSTN. "Jeff Otterson"

On boot, my computer has been beeping at me and showing the BIOS screen for almost two minutes. During that time, it does not respond to tab or delete. Where do I find the beep codes for a MSI K9N SLI Platinum Series motherboard? My google-fu has failed me. -- Michael hennebry at web.cs.ndsu.NoDak.edu "SCSI is NOT magic. There are *fundamental technical reasons* why it is necessary to

freebsd quite current ports tree 1.01 asterisk spa3k at 2.0.11(GWg) for calls in from the pstn side of an spa3k to asterisk, i get sporadic short beeps. they are not related to sip re-reg time, which is all that has occurred to me so far. calls in from the fxs side of the spa3k and out through nufone do not exhibit the beeps. calls from the fxs side of the spa3k out the fxo side do have the

There are no cordless devices in this situation. :) Jerry Geis wrote: >/ I have a normal setup of calls coming in on analog lines (4 of them) />/ coming into />/ an old KX1232 pbx. I have those lines forwarded to a T1 card in the />/ KX1232 />/ going over to my T1 card, it then uses IAX going over to my REAL />/ asterisk pbx. />/ />/ (these steps are there for testing

I still have problems with beeps and clicks on all my calls. I have polycom sip phones. I also can hear the beeps and clicks on some of my messages, which would lead me to believe that it is more of a decoding problem on the zaptel card. Any ideas? Thanks Sean Garland

I have been trying to track this down for a while to no avail. I have a variety of different SNOM phones (the entire 3XX series) and have also tried on a variety of different Asterisk versions (pretty much the whole 1.2 and 1.4 train) When I "Page()" phones in Asterisk, I only intermittently get an audio indication on the recipient phone. Audio Indicator is turned on, and I'm

I have been trying to track this down for a while to no avail. I have a variety of different SNOM phones (the entire 3XX series) and have also tried on a variety of different Asterisk versions (pretty much the whole 1.2 and 1.4 train) When I "Page()" phones in Asterisk, I only intermittently get an audio indication on the recipient phone. Audio Indicator is turned on, and I'm

How would one go about having asterisk insert a faint 'beep' once every ten seconds or so whilst a call is being recorded? I can't see any flags in the Monitor appliction for doing so. This is a legal requirement in many jurisdictions when calls are being recorded (as an alternative to an announcement at the start). Ben

Hi, [I'm Using redhat linux 7.1 with R-1.4.1 rpms.] Last summer, Henrik Bengtsson wrote to R-help: > Is there a way to turn of the (annoying) beep that occurs when one calls the > locator() command and clicks the mouse. Try > > plot(0) > locator(n=10) > > I am running Rterm on WindowsMe/Cygwin bash and I don't know if this is the > case on other platforms.

I have my new phone mostly working. I do have a couple of residuals that I cannot find mentioned in the list archives: 1. Is it possible to set the volume in these things? I hope I didn't miss it, but I've looked in the doc, the FAQ, and the asterisk archives and don't find anything. The displays in the pictures all have more bars on them than my phone does, and I need a bit

Hi all, Hopefully you can help me. I want to turn off the audio "Call Waiting" beep that plays during a call. I have found the line in the indications.conf for Call Waiting but apart from setting the frequency to zero or the length to zero is there a proper way to disable this functionality. thanks very much alex This email and any attached files are confidential and