Displaying 20 results from an estimated 1000 matches similar to: "Zultys ZIP 4x5"
2004 Jul 01
5
Zultys 4x4 or 4x5 ip phones?
Does anyone on-list use the Zultys 4x4 or 4x5 ip phones? I'd like to
hear some opinion before I buy a few. I'm especially interested in the
PSTN interface on the 4x5. Does it relay to * for VM when an incomming
call is not answered by the phone?
Thanks,
Michael
--
Michael Graves mgraves@pixelpower.com
Sr. Product Specialist
2004 Aug 21
1
Zultys 4x4 or 4x5
Hi All,
A friend has asked me to get a new Zultys 4x5 working with his *
server. I've been over the web gui but don't see where all the
registration info gets entered in the phone. Is there someone on-list
who has Zultys phones and can advise me as to their setup? The
manufacturers docs are useless.
Thanks,
Michael
--
Michael Graves mgraves@pixelpower.com
Sr.
2005 Mar 29
0
Zultys 4x5 phone
Does anyone on-list have any advice about the version 2.2 firmware for
the Zultys 4x5 phone? It has a new "gateway" mode that is supposed to
direct calls on the analogue line to the PBX for VM, etc. Zultys has
not yet presented any docs, and the keep refering me to the reseller
who doesn't know anything about t at all.
Thanks,
Michael
--
Michael Graves
2004 Jun 13
2
Sayson IP Phones?
Have the Sayson IP phon started to deliver yet? I'm thinking about two
new phones for my office and considering the Sayson 480i and Zultys
4x4. Would also consider the Virbiage phone if it becomes available. I
have Snom 200s and a Pingtel phone at the moment.
Michael
--
Michael Graves mgraves@pixelpower.com
Sr. Product Specialist
2004 Oct 06
0
Zultys phones with encryption
Hi All,
Does anyone on-list have experience with the Zultys 4x4 and 4x5 phones
with AES encryption? Does this work well with *? I imagine that it
would work as long as * doesn't have to decode the stream. What are the
implications for calls going to voicemail or MeetMe?
I'd pondering installing the 4x5, especially if Zultys can make the
on-board FXO port available to * as well as a
2004 Jul 29
2
Zultys Zip 4x4
Is anyone successfully using one of these with Asterisk? I cannot get the
phone to register, this message keeps coming up on the Asterisk console:
Jul 29 14:11:39 NOTICE[1125350192]: chan_sip.c:7323 handle_request:
Registration from '"000BEA801CA6" <sip:000BEA801CA6@hcs.net:5060>' failed
for '204.194.36.138'
The telephone LCD says "SIP registation
2003 Oct 16
0
Zultys Zip 2 Registration / Disabling SIP Authorization
I'm trying to get a Zultys Zip 2 phone working with Asterisk. The phone
seems to be failing registration (see sip debug output below). However, I
can place calls TO the Zip2 from other SIP phones (Grandstream BT-101, Xten
X-Lite, and eStara Softphone) and from Nortel PBX extensions coming in to
Asterisk over a PRI T1. The problem is that I cannot dial any extensions
from the Zip 2. Any
2005 Aug 06
0
Need Help RE Zultys Zip 2+ Basics
I have my first Zultys here but can't seem to get to first base. Does
anyone have a basic configuration file they might share? Mine is a Zip
2+.
If I understand the Zultys User Manual, the default passwd should be a
null string--but the web interface isn't accepting that (nor 'admin' nor
a couple others).
Anyone know what the default passwd actually is?
Thanks for any and all
2005 Jan 17
1
ntp Server and Zultys 4X4
Good Day List,
I have my asterisk box setup to be an ntp server, and my zultys
4X4 phone is able to get the time, however
I must first select the TimeZone Offset and then it will use the
time setting from my server.
This is a hassle because every time the phone reboots the user
must answer this question and as you can imagine
End users do not know what to do and since the phone is not
2005 Feb 17
1
Zultys Paging Solution / App for Multicast
Hi all,
I have found the solution for getting Zultys handsets to accept paging
messages.
We need an app to send RTP packets with a codec of G711U to send to port
3771 on multicast dest of 224.0.0.1. There isn't any need to use SDP or
SCCP packets to inform the phone to "listen" for those packets, they do
it by default. Finally we may be able to get a solution going for Zultys
2005 Jan 29
2
Silly question: Why multiple lines on SIP phones?
This is probably going to sound really silly and I must be confused about
it. Maybe someone can set me straight.
I've been tinkering for a while with * and a number of different FXO/FXS
cards, SIP phones, and ATAs trying to get a feel for what works and what
doesn't. In the SIP phone group, I have a Cisco 7940G, a Polycom 500, and
now an SPA-841. Each of these allow me to configure at
2006 Feb 21
17
What business IP phone to use
I have been struggling with this issue for about a year now. There were
just too many IP phones to choose from at all sorts of price points and not
enough information about any of them. Now I am looking at the situation
again and if anything it has gotten worse. There are even more phones and
all sorts of opinions. For every person that says phone x is great there is
someone else complaining
2004 Jun 01
0
Message light and paging on Zultys ZIP2, Uniden UIP200 time offset
I am trying to get a new Asterisk installation running using a Zultys
ZIP2 phone and a Uniden 200 phone. I have the system working reasonably
well (although probably not optimal) except for a couple of items.
First, I can't get the voice mail message light to work on the Zultys
phone but it works just fine on the Uniden phone.
Second, the time presented on the Uniden UIP200 phone is 1 hour
2006 Oct 27
0
Zultys Phones w/ Encryption
I've got a Zultys WIP2 and Zultys 2x2 both of which support encryption. I
have patched my asterisk with srtp (srtp.sourceforce.net) as well as with
the patch found at http://bugs.digium.com/view.php?id=5413. I'm trying to
utilizing the encryption feature of the two Zultys phones to create an
encrypted call, but am having extreme difficulty. I keep getting the
following error message
2004 Aug 06
1
Asterisk Dry Run
Hi everyone,
I just installed asterisk on my system with the purpose of rerouting calls
on sip channels.
I don't think i need any hardware for that.
I am using LIPZ4(zultys) and sjphone as softphones. I tried setting up both
of them and to call one from the other on the same machine, however could
not.
I 1-) I could connect sjphone in isolation to freeworld dialup howver i got
no sounds
2003 Apr 05
2
Experiences with Zultys 4x4 SIP phone?
Anyone had experience with this phone? The interesting features that
caught my eye were the RTP encryption, speaker "pager", and built in
4-port ethernet switch. Of course, RTP encryption doesn't exist in *
yet, but it might be interesting (I've had people ask about it, but I
don't know how serious they are about needing it.)
http://www.zip4x4.com/summary_ZIP4x4.htm
2004 Aug 04
0
Zultys ZIP2
Hello All,
I'm having trouble getting a Zultys ZIP2 to work with Asterisk, along
with some other troubles in general.
I keep getting a "Got SIP response 481 "Call Leg/Transaction Does Not
Exist" back from x.x.x.x). Even when Asterisk reports that the ZIP2
registered correctly, I can't make any calls out from the phone, or
calls into the phone. Occaisionally I get a
2005 Feb 08
1
Voip as a secure service?
Hi All,
I was just reading through Info Week while on a flight and happened
upon an brief piece about a new VOIP security intiative worked up by a
handful of the usual suspects; Alcatel, SMU, NIST, Symantec, etc. All
of this begs the question of can't we get just do this as a user
community?
I understand that the Zultys phone, which I own several, support AES
encryption of the RTP stream.
2004 Jan 13
2
Mediatrix 1102 issue after upgrading to CVS
We just did an upgrade on our Asterisk to the CVS version and our
Mediatrix 1102s stopped working correctly. Our Asterisk is connected to
the PSTN with a PRI. Calls from the PSTN to the Mediatrix 1102 work fine.
The issue is calling out to the PSTN from the 1102. Asterisk looks like
it process the call just fine except there is no talk path. Get this,
though: If you flash hook and then
2005 Aug 10
3
Hard deskphone via wifi?
Has anyone here ever tried using a wifi bridge to place a deskset in
someplace where there was no LAN drop? If so what hardware did you use
and was it succesful?
Michael
--
Michael Graves mgraves@pixelpower.com
Sr. Product Specialist www.pixelpower.com
Pixel Power Inc. mgraves@mstvp.com
o713-861-4005