similar to: Phone interface hardware

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've tested the S100U unit in two different computers both with different USB subsystems. The one it worked the best in used the usb-uhci USB driver. The other system uses the usb-ohci USB driver. To make sure it was not the installation, I used the same hard drive that had asterisk in both systems. And I moved the X101P and S100U between both

We have a S100U which we were using as our sole internal phone extension. Today it died. Picking up the phone now results in a brief dialtone followed by bursts of random static and crackling noises and then a second or two of fast-busy followed by silence and more crackling noises. I've tried the hardware attached to a couple of different machines as well as a couple of different phones.

I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal. 1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event.

Hi, I have been trying to figure out why the S100U is not performing very well on RH9.. Here is my thinking..( may be totally wide of the mark but here goes anyway) I remember reading somwhere that the sound system used by RH has changed... Does the S100U not depend on the sound subsystem?? So what I think is that the sound subsystem in RH9 and the S100U are not happy working together.. Does

My system seems to be generating a call on its own... Unfortuately I can't give much more information.. I have an X100P and an S100U.. My Modem and the X100P share a common line.. When I am on the internet (which is most of the day) * just sits there and does nothing (apart from when I am testing ideas for the dial plan), but at night when I am sleeping and the modem is not connected then

Dear Geskus, I want to develop a prediction model. I followed your paper and analysed thro' weighted coxph approach. I can develop nomogram based on the final model also. But I do not know how to do internal validation of the model and subsequently obtain calibration plot. Is it possible to use Wolbers et al Epid 2009 approach 9 (R code for internal validation and calibration) . It is

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

I have just started developing asterisk, and am trying to start simple. I have a X100P device and an S100U device. I am trying to use the examples provided, where I add a few lines to the /etc/zaptel.conf, /etc/asterisk/zapata.conf, and /etc/asterisk/extensions.conf so that I may connect an analog line to the X100P and an analog phone to the S100U. When I dial the analog line, it should ring

HI All, I am new to asterisk. i want to make outbound calls from asterisk. I tried with many times with the given settings but in vain This is my scenario: I have a *user A* who has registered with sip server(ONDO), I made asterisk to register as a sip client with ONDO, I want to make a call to user A from an extension. My configurations sip.config [general] context=default

Hi All, Trying to get familiar with dplyr so I have a basic question: How to summarise sum(Values) per species, maintaining Code column (each species has a Code): Species Values Code 1 Acanthocybium solandri 33 LC 2 Makaira nigricans 20 VU 3 Makaira nigricans 20 VU 4. Makaira nigricans

Hi, There is someone on this list who has the specification for the IPW driver? I want to provide full support for it in DIAX Phone, but Actiontec does not answer to my mails. There is any windows driver available for the Digium's S100U USB interface? Anyone knows if it can provide full functionality for the connected phone, like callerid, callwaiting callerid, message indication, ring,

On Thu, Mar 22, 2018 at 4:52 AM, Raja, Dr. Edwin Amalraj <amalraj.raja at abdn.ac.uk> wrote: > Hi , > > library(foreign) > write.dta(data1, "data1.dta") > > should work. I don't think so: > library(foreign) > example(svydesign) > write.dta(dstrat, "~/Downloads/foo.dta") Error in write.dta(dstrat, "~/Downloads/foo.dta") : The

Hi All, I am using dovecot-1.0.rc15 wth LDAP authentication configured. My webmail is Horde/IMP. While logging in, Horde gives `Unable to retrieve quota' message, instead of the usage report. capability string is: OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS AUTH=PLAIN] Dovecot ready. There is no QUOTA shown

Hello, I just bought a X100P from digitnetworks. It is supposed to be a FXO card, but there are 2 rj-11 plug on the card. One is labelled "phone" and the other "pstn". When i plug the "pstn" on the wall and the "phone" on my analog phone, everything (incoming and outgoing calls) works like before (without asterisk). AFAIU, i should have an FXS card in my

Dear All, I would like to use R function 'selectFGR' of fine gray model in competing risks model. I used the 'Melanoma' data in 'riskRegression' package. Some of the variables are factor. I get solution for full model but not in variable selection model. Any advice how to use factor variable in 'selectFGR' function. The following R code is produced below

Hi, I have got a hissing/humming noise on my handset that is connected to the S100U USB device.. I was running a CVS version of * that was about 2 to 3 weeks old and had perfect quality.. But that HDD died on me so I reinstalled and used the latest CVS, now I have this sound that is best describes as a similar sound to the noise a cpu fan makes.. Like a high piched hissing noise.. Any one

Dear Thomas, I want to use evaluate effect of Age using restricted cubic form in the FGR function as Fgr.crr <- FGR(Hist(time, event) ~ rcs(Age_years), data=dat) It provides error. " Error in parse(text = termtext, keep.source = FALSE): .... 1: response ~ rcs(Age_years Do I need to change any of the R code? Regards Amalraj Raja The University of Aberdeen is a charity

Hi , library(foreign) write.dta(data1, "data1.dta") should work. The file will be saved in the working directory. Use getwd() to know the working directory. Best wishes Amalraj Raja -----Original Message----- From: R-help [mailto:r-help-bounces at r-project.org] On Behalf Of rosario scandurra Sent: 22 March 2018 07:47 To: r-help at r-project.org Subject: [R] exporting data to stata

Hi all, my environment: dovecot-1.0.rc15 Fedora Directory Server 1.0.2 Currently I've configured dovecote to find user's mail folder like this: dovecot.conf mail_location = maildir:/var/vmail/%d/%u/Maildir All my domain mailboxes are under /var/vmail, as evident. But there are some users whose mail folders are directly under /var/vmail like this one: /var/vmail/myuser1 at mydomain1.com

Hi All, My CentOS 5.1 server is using iSCSI attached disks connecting to a dual controller storage array. I have also configured multipathd to manage the multiple paths. Everything works well, and on boot the dev nodes are automatically created in /dev/mapper. On these devices, I have created logical volumes using lvm2. My problem is that lvm does not recognize these iscsi/multipath volumes on