similar to: No dial tone on BT100

My BT100 won't register with my Asterisk server, it always comes back with a 403. I've included my sip_additional (only one to to have the username 2201) and a portion of the sniffer trace (packets 27 & 28). This has me puzzled as I have my SPA-3K working (incoming and outgoing). On my BT100 I get no dial tone, I can't call it (asterisk says the extension is busy) but I can call

I'm afraid I'm quite confused by what I've found on the Wiki. I have the following dial plan that works: exten => 2201,1,Dial(sip/2201@gs1.uucp,20,) exten => 2201,2,Voicemail(u2201) exten => 2201,3,Hangup exten => 2201,102,voicemail(b2201) exten => 2201,104,hangup When the phone is in use it goes to voice mail as busy. When not picked up, as

OK, this may seem to be an obvious question but where do I find the reference docs? I'm getting this error message: Timeout, but no rule 't' in context 'home' about this line: exten => 2201,1,Dial(${PHONES1},20,Ttm) I know the problem is with the 't' but I don't know what the parameters mean. I looking for a man page basically. -- Linux Home Automation

I have IAX2 (FWD) partially working. I can place calls from my Asterisk box but I cam unable to receive them (comes back as busy). I have my firewall forwarding the udp ports 5060, 4569, 5036 and 10000 thru 20000 to my asterisk server. I think I have the firewall correctly setup as I can forward other services to their appropriate servers. I have no mail box on the one account (the one I'm

Just a note to those of us with the SPA-3000 that have had a hard time with the 'volume' of calls from the PSTN (we're on the line they're on the PSTN). Anyway I change the parameter: PSTN To SPA Gain to 6 and the volume is fine (it's under the PSTN Line tab). I don't remember seeing this on the list so I thought I'd add it here. Guess I should add it to the wiki (a

I recently lost my setup (bad drive) and I'm now trying to get my setup back. I have Asterisk setup to a BT100, a Cisco 7960 (7.2 SIP) and an SPA-3000. I can call the phone extension, I can call from the phone on the SPA to other extensions and I can call out to the PSTN. What I can't do is to call from the PSTN to through the SPA to Asterisk. It rings twice then I get fast busy. I

Does the ${BLACKLIST()} function allow for values other than 1 to be returned and if so how can I use that is the AEL? Can I use the function in a switch statement? -- Linux Home Automation Neil Cherry ncherry@linuxha.com http://www.linuxha.com/ Main site http://linuxha.blogspot.com/ My HA Blog Author of: Linux Smart Homes For Dummies

I had my setup working properly under 1.2 and after a disk crash I decided that I wanted to try Asterisk 1.4. So far I can transfer between phones and I can dial out. What I can't get working is to get an SPA-3102 to 'send the calls' to Asterisk. I have the device added to the sip.conf file and it shows up in users and peers (but not in registry). Where do I start with debugging? --

I've been using Asterisk for a few weeks now. I have a (1) BT100 phone and a Sipura-2000 for all my analog phones. All has worked rather flawlessly, until today. I was on the BT100 phone today. During my phone conversation, the BT100 disconnected and went into a "click" mode. 2 "clicks" per second I think. Asterisk was fine, I picked up one of the analog phones,

Hi All, I'm trying to configure 2 GS BT100 connected to asterisk and Welltech 2 ports FXO gateway. I configure WellTech 2ports FXO and GS BT100, both GS BT100 can call each other without any problem but when I tried to call a local extensions connected to my Welltech FXO gateway, I couldn't hear any voice on both ends. I would like to ask if anyone has ever encountered this kind of

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

Hi, I am getting the following error when I attempt to listen to voice messages by dialing 9999 (I can hear nothing): --Executing VoiceMailMain ("SIP/2092-6918", "2092") in new stack --Playing 'vm-password' (language 'en') WARNING: app_voicemail.c:4922 vm_authentication: Unable to read password. I read in previous posts that this may be to do with the dtmf

Following on from my below email, things have taken another bizarre twist.. I have continued getting the error when 2092 tries to listen to messages by dialing 9999. --Executing VoiceMailMain ("SIP/2092-6918", "2092") in new stack --Playing 'vm-password' (language 'en') WARNING: app_voicemail.c:4922 vm_authentication: Unable to read password. Then I

hi all i upgrade a bt100 phone and it can't resgister with asterisk Dec 1 13:25:49 NOTICE[1112980400]: chan_sip.c:7519 handle_request: Registration from '<sip:@172.16.4.249>' failed for '172.16.4.226' is was working with the version 1.0.5.3 some bady now what is hapening? thanks in advance Rodney

Hi All, I have tried searching everywhere but I cannot find a definitive answer as to if and how the conference button works on the BT100. Could anyone be kind enough to fill me in on some info on how to use the conferencing feature, as well as any configuration in asterisk thats needed, on this phone? Thank you, James -------------- next part -------------- An HTML attachment was scrubbed...

Hi All, I'm sure this is something simple that I have missed somewhere. When I make a call using BT100 over IAX2 with Voipjet terminating I don't get a ringing sound whilst I'm waiting to be connected. The destination party can answer the call (they do get ringing) and conversation can take place. I don't get this problem with X-Lite softphone? Any help appreciated -

Hi, after upgrading to Asterisk 1.2.8 from 1.2.7.1 I got a problem with Grandstream BT100 after making an attended transfer (FLASH + NUMBER + SEND + WAIT ANSWER + TRANSFER). After the transfer, the display clears all the info except the clock, there is no dial tone, the WEB admin stops working. Incoming calls make the display light turn on but there is no ring and no callerid on the

OK, here goes my next problem. I have puchased a DID which I can connect to via SIP I have been given the following details: Username: uka1xxxxxx Password: 1000xxxxxx Server: brxxxx.net:5160 My equipment is Asterisk CVS HEAD on Red Hat EL 3.0 (NO NAT) The other end is a Cisco AS5300 (NO NAT) I can register with the Cisco with no problem. When I dial the DID it sends the call to my asterisk

hello all- has anyone had any problems with the handsets on BT100's. Just picked one up for my lab and the speakerphone works great but I am only getting one way audio (incoming) from the handset. Since the speakerphone works fine, I can't think of any config. reasons why the handset wouldn't other than a faulty handset. Any thoughts or experiences? Jason Kawakami Technical

No idea for this problem? Alex -----Mensaje reenviado----- From: Ing CIP Alejandro Celi Mari?tegui <alex@linux.org.pe> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Subject: [Asterisk-Users] [Fwd: newbie DNS problem with BT100] Date: Tue, 22 Mar 2005 19:42:30 -0500 (Sorry, but my english is very bad) Hi I'm newbie with