I added secret=1234 to my configuration for phone 2092 in sip.conf. Also
I changed the settings of the BT100 so the authentication password was
1234 and changed voicemail.conf to 2092 => 1234, 2092, emailaddress.
However this seemed to make matters worse as the nothing even seemed to
reach asterisk. A '4' was sent back to my phone.....Strange that it
wasn't a 404 message, just a 4. Anyhow, when I removed the secret=1234
line from the sip.conf, the error still remains:
vm_authenticate: unable to read password.
Any further ideas?
Many thanks,
Aisling
-----Original Message-----
From: Alvin Austin [mailto:alvin@crlogic.com]
Sent: 06 September 2005 18:43
To: ashling.odriscoll@cit.ie
Subject: Re: [Asterisk-Users] Asterisk BT100 Password Issue
This works for me. Note that you need the secret=1234 line, where you
replace the number 1234 with your authentication password...
See also: http://www.voip-info.org/wiki-Asterisk+config+sip.conf
[20]
context=from-sip-internal
type=friend
callerid=20
username=20
mailbox=20
secret=1234
host=dynamic
defaultip=192.168.x.x
canreinvite=no
dtmf=info
dtmfmode=rfc2833
disallow=all
allow=ulaw
allow=alaw
allow=g726
allow=gsm
allow=ilbc
allow=g729
Regards,
Alvin
Aisling wrote:
> Hi,
>
> I am getting the following error when I attempt to listen to voice
> messages by dialing 9999 (I can hear nothing):
>
> --Executing VoiceMailMain ("SIP/2092-6918", "2092") in
new stack
>
> --Playing 'vm-password' (language 'en')
>
> WARNING: app_voicemail.c:4922 vm_authentication: Unable to read
password.>
> I read in previous posts that this may be to do with the dtmf settings
> and have set both (asterisk and BT100) to info. This has not helped.
> My phones register with SER (port 5060) and use Asterisk for voicemail
> (port 5064).
>
> My configs are below along with my BT100 settings:
>
> ;Grandstream BT100
>
> SIP Server: x.x.x.x:5060
>
> SIP User ID: 2092
>
> Authenticate ID: 2092
>
> Name 2092
>
> SER then forwards to port 5064 of Asterisk.
>
> ;sip.conf
>
> [general]
>
> bindport=5064
>
> bindaddr=0.0.0.0
>
> disallow=all
>
> allow=ulaw
>
> allow=alaw
>
> allow=gsm
>
> srvlookup=yes
>
> canreinvite=no
>
> autocreeper=yes
>
> nat=yes
>
> [2092]
>
> type=friend
>
> username=2092
>
> canreinvite=no
>
> context=from-sip
>
> mailbox=2092
>
> host=dynamic
>
> nat=no
>
> dtmfmode=INFO
>
> disallow=all
>
> allow=alaw
>
> allow=ulaw
>
> ;extensions.conf
>
> [general]
>
> static=yes
>
> writeprotect=yes
>
> [from-sip]
>
> exten => 2092, 1, Dial (SIP/2092, 20)
>
> exten => 2092, 2 , Voicemail (u2092)
>
> exten => 2092, 102, Voicemail (b2092)
>
> exten => 2092, 103, Hangup
>
> exten => 9999, 1, VoicemailMain(${CALLERIDNUM})
>
> ;voicemail.conf
>
> [general]
>
> format=wav
>
> [from-sip]
>
> 2092 => 2092, 2092, emailaddress
>
> Has anyone any inkling as to what the cause could be?
>
> Many thanks,
>
> Aisling.
>
-------------------Legal Disclaimer---------------------------------------
The above electronic mail transmission is confidential and intended only for the
person to whom it is addressed. Its contents may be protected by legal and/or
professional privilege. Should it be received by you in error please contact the
sender at the above quoted email address. Any unauthorised form of reproduction
of this message is strictly prohibited. The Institute does not guarantee the
security of any information electronically transmitted and is not liable if the
information contained in this communication is not a proper and complete record
of the message as transmitted by the sender nor for any delay in its receipt.