similar to: Cisco ATA and a PayPhone

Hello I have a 800 DID setup to dial into my Asterisk server and I'm wondering if it's possible to ID when it's a payphone or not? I suspect it's not since I'm getting calls from someone else's SIP or IAX box. If I had a digium card installed and connected to a couple lines would I be able to get this information and parse it? Thanks, Jess

Quickie: Does anyone out there have experience with PRI delivery of ANI II information? Specifically, I want to know if it's possible from within Asterisk to know if the inbound call (which may or may not be to an 800 number) came from a payphone or not. I know with some 800 providers it's possible to block inbound calls from payphones (due to the FCC surcharge etc) but was wondering how

Hi List! any body use www.simpletelecom.com? I subscribe to www.simpletelecom.com for A-Z termination and paid US$15.00 and US$70.00 via credit card in two days, but my account has US$15.00 only. I checked my credit card from the bank and they said me the payment already paid to merchant. I've lost US$70.00 :( so anyone here has experience with them? are they a SCAM? Thanks! </Madhawa>

I've got a dumb Western Electric payphone and some homebuilt hardware to control the coin relay which is accessible to Asterisk through the AGI interface. I'd like to be able to set the state of the coin relay to collect at the end of a call if a called party answers. [Hey, I admit this project is being persued just for the fun of it ] Looking through the documentation, there is a way to

[ Optimised G.729A 'Howlet' for Asterisk & FreSWITCH ] Howler Technologies are proud to announce today the launch of their fully indemnified and highly optimised G.729A solution for Asterisk, including a unique floating license model. This is the first in a series of products dubbed 'Howlets' that add highly performant transcoding and signal processing modules to open-source

Hi all, I have been looking at the code for both the zaptel driver (wctdm.c/wcfxs.c) and the asterisk channel driver (chan_zap.c) trying to figure out how much of this that has been implemented. So far I can see that the current stable 1.0.9.1 zaptel driver don't have the SETPOLARITY ioctl that would be required to properly signal the Swedish/Dutch CLIP, but the 1.2 beta1 has this

> -----Original Message----- > From: Jacqueline Lee [mailto:jlee@isdomaininc.com] > Sent: Friday, September 23, 2005 11:46 AM > To: asterisk-users@lists.digium.com > Subject: channel offhook state > > > We are using a digium card (TDM400) with asterisk for our access to the > PSTN. Initially when the server starts, all the zap channels on the card > are in the

the caller is out his money anyway when you call any phone and voicemail kicks in, although i think on a payphone they give you a 2 or 3 second window to hang up. Suggest you implement i'm here / i'm away dialplan logic or set the do not disturb button that way when someone calls and the guy is away it hits voicemail right away and the caller can hear this and still have the 2 or 3

hello I dont want to disgrace any company but i want to know from your(user)experience which one is good in case of g.729 (performace etc) is it Howler(http://www.howlertech.com/products/howlets) OR its Digium ( http://store.digium.com/productview.php?category_id=5&product_code=8G729CODEC&main_category_id=5 ) plz note i dont want to degrade any company... But to know what experience you

I would like the ability for a sipura sip device to instantly connect to an asterisk server as soon as the sipura sip device goes offhook and before any digits are pressed. This way asterisk can provide the dialtone and the dialplan. This also allows me to play a greeting to the phone before giving them a dialtone. Is there any way to do this, like possibly having the sipura device dial a

Hello list, Hope you all doing fine! I've tried to use the 'alias' directive in the indications.conf file but apparently it doesn't work.... It looks like maybe this feature was removed, because old sample for the indications.conf file have example using the alias parameter, but newer samples don't have it anymore.... also I couldn't find any ticket saying this parameter

Hi With an FXO module + Zaptel, I'd like to know if there are ways to know when the remote party has answered the phone, whether calling through a callfile or by sending DTMF's. I read about {CHANNEL(state), ChanIsAvail(), and ${DIALSTATUS}: Are those reliable ways to know when the channel is available for dialing out and the call has been answered?

Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

I am wondering if it is possible for an extension that is served by a zaptel device to revert to dial tone once a call disconnects. For instance, if I make a call to another extension, talk with them, and THEY hang up, can I then be presented with a new dial tone rather than a congestion tone? Further, can an extension be set up so that, once the call goes back to dial tone, if the user does NOT

>Asterisk and it works fine untill the following >situation: > >- one of the telco lines occasionally becomes mute after call is completed, would not provide dial tone, (not sure about ringing on that >line) - both via old and new PBX. >- zap show channel <n> would show that line as 'Offhook', though no telephone is off hook. > >If physical line would be

Hi dears, I am from saudi arabia and using asterisk 1.6.2.13,Dahdi-2.3.0 and Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) . I am facing problem with detecting caller id before first ring.I recorded the dahdi channel using dahdi_monitor command. Where I am able to see and hear caller-id dtmf tones. Pl tell me the procedure to upload recorded file if you needed. Something I want

Does anybody know if there are any external telephone-keypads for sale anywhere? (containing the keys 0-9, *, # and onhook/offhook would do) I am looking for a keypad to control a softphone and would prefer the controls to be in the physical world instead of as a window. Sincerely, Markus Hakansson

I am looking for the most stable version of Asterisk to use with ASTCC for a production environment. It does not appear that any of the Stable versions will be suitable since they do not support US PRI ANI Info digit collection and hence could not apply surcharges for payphone use, etc. Is there a specific CVS Head version date that includes the II updates and has proven to be stable enough to

I have a TDM400p with 3 FXS mods and 1 FXO mod. I have all set up with what seems to be correct settings (according to digium and asterisk wiki). As soon as I plug in my POTS line into FXO mod the line goes into offhook state (whether I have power to the card or not). Should this happen? When I try to call * box all I get is busy signal. I've installed stable version, cvs version, change