similar to: fax <--> grandstream 286 <--> asterisk <--> pstn

Hi, I am trying to do some simple ingress limiting based on fwmark. I know the ability and sense to do INGRESS limiting is ehm... limited ;-) but still I want to try it. I tried several things. === 1 === tcq ingress handle ffff: tcf parent ffff: protocol ip prio 1 handle 1 fw police rate 12mbit burst 10k drop tcf parent ffff: protocol ip prio 1 handle 2 fw police rate 10mbit burst 10k drop

Hi! I am using wine to compile code for Texas Instruments dsp's. One step in the process is generating code from a graphic configuration file (tcf). When I try to do that, it fails with some Java related messages. The -b in my command tells tconf.exe to run in batch mode, so it doesn't try to open a GUI or something like that. I ran the same command in a dos-shell and it worked

I have samba 2.2.8a compiled with option --with-acl-support --with-pam -- with-winbind on solaris8. My problem is: - when I copy the data from old nt server to new samba server with this command xcopy oldserver newserver /O/S I received for some files Access Denied. I have add on the smb file force unknown acl user = yes but I have problem. This is my smb.conf. [global] workgroup

Hi, I''ve setup a gateway using multiple default gateways and netfilter MASQUERADE to load balance traffic between two DSL interfaces and one dedicated link, and when I try to download something big, or when I''m using MSN (both in clients under this gateway), sometimes, or most times, after a while the connection timeouts. The connection doesn''t seem to change its

Hello, i try to setup asterisk with hylafax: the config is: egrep -v "(^#|^$)" /etc/hylafax/config.ttyIAX0 CountryCode: 49 AreaCode: xxx FAXNumber: +49xxxxxxxx LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs:

Just thought I'd remind you about my problem ;o) Has anyone got a clue about what I need to do to solve the wine/java problem below? - Anders Anders R?nningen wrote: > Dan Kegel wrote: > >> anders.ronningen@tandberg.net wrote: >> >>> I am using wine to compile code for Texas Instruments dsp's. One step >>> in the process is generating code from

any news? ---------- Forwarded message ---------- From: Emin Hasanov <emin@hasanov.com> Date: May 10, 2006 11:50 AM Subject: Fwd: ?????????? To: Rovshan Baghirov <rovshanb@gmail.com> Rovshan, how would you estimate this work in terms of manhours? ---------- Forwarded message ---------- From: Anar Ibrahimov < anar@autostar.az> Date: May 10, 2006 11:22 AM Subject: ??????????

Hi all, I've just setup a sip line with Telasip and when they route the calls to my asterisk box, they include an extension along with the context that is defined in sip.conf for that DID. At first, I couldn't figure why they were getting 404 error from my asterisk box, but then figured out that they are sending the call to an extension that matches my number with them, in the

Hi, I would like to improve my understanding of T.38. 1. What T38FAX_VERSION_0 or T38FAX_VERSION_1 in chan_sip.c means ? voip-info.org implies one has to change values in chan_sip.c to make it work. Shall I set T38FAX_VERSION_1 or leave T38FAX_VERSION_0 in global_t38_capability ? Source code says "This is default: NO MMR and JBIG trancoding, NO fill bit removal, transferredTCF TCF, UDP FEC,

Hello, I am a newer on asterisk. when I tried to send fax, I can not get success. After doing a lot of reseach, I decide to ask my question at here. Instead of using old fax machine, I want my system can send fax via t.38. Could anyone give me some idea to correct my configuration? Thanks a lot! Here is the detail: my system: *ubuntu 14.04 + asterisk 11.7* I use apt-get to install the ubuntu

Hi, We have a Ericsson BP250 Phone system setup witht he following configuration Telco <-> Asterisk E405P <-> BP250 The system seem to work perfectly on 1.0.9 for a very long time but there is some functionality we wanted to take advantage of in the 1.2 version branch so we upgraded. Currently running Asterisk 1.2.4 Zaptel 1.2.3 (noticed 1.2.4 is out will upgrade next

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

Per the recent (seeming) consensus regarding incubating new projects under the LLVM organization, I would like to trial the process by requesting to incubate mlir-npcomp <https://github.com/google/mlir-npcomp>. The project is still quite young and has been primarily developed part time by myself and Sean Silva over the last ~2 months. We set it up following discussion of a Numpy/Scipy op set

Hello, LARTC mailing readers, I hope u can help with this mysterious issue i''m having with my linux box acting as a router. Scenario: Linux running 2.6.8.1 /w julians patches Latest iproute (iproute2-ss040702) 4 NICS ----------------- | x eth0 (63.43.x.x) network mask (255.255.240.0) | | x eth1 (63.43.x.x)

Hello, LARTC mailing readers, I hope u can help with this mysterious issue i''m having with my linux box acting as a router. Scenario: Linux running 2.6.8.1 /w julians patches /w support for multipath routing Latest iproute (iproute2-ss040702) 4 NICS ----------------- | x eth0 (63.43.x.x) network mask (255.255.240.0) | |

I finally picked up a "real" modem (not a winmodem) and put it in my machine. I pulled down the hsfmodem driver from the source, got a license and installed the driver at full power. If I use wvdial, I can get out through the modem, so I know that works. However, sendfax is rejecting the fax capability (from /var/log/sendfax.log): 11/30 00:31:52 sendfax: interim release 1.1.33-Apr10

I used to be able to install the efax application from efax.com but it seems to hang now when I click the first "Next" button. cpu is spiked and just continues to run endlessly until I kill it. Here's the debug information if anyone can help... Invoking /usr/lib/wine/wine.bin msgrplus.exe ... warn:ntdll:NtCreateFile L"\\??\\C:" not found (c0000034)

Due to some failed hardware on another platform, I've had to move a T100P card to a different chassis. After this move was completed, I am seeing some strange results on the T100P card that do not display to me any failure mode with which I am familiar. The card comes up, and shows "good" carrier and status, but Asterisk refuses to bring the D-channel up. Calls of course do

Hi, I am trying to recice a fax with * using SpanDSP - but it doesn't create the output file. (See the bottom of log file). * Loads both app_rxfax.so and app_txfax.so fine. Also I can't make * autodetect an incomming fax call (yes I have enabled faxdetect=both in zapata.conf - though it's not a Zap device) Any ideas are welcome :-) Best Regards Michael L?jtnant System Details:

Hi, I have tried to install and configure the FAX app using the steps described in several mails on this list. When a FAX call arrives on X100P, the fax extension is executed, which looks like: exten => fax,1,RxFax(/var/spool/asterisk/incoming/${CALLERIDNUM}.tif) exten => fax,2,Hangup It tries to negociate, but nothing is received at the end and the other part times out. More, after this