similar to: Asterisk@home and OpenLine4 issue

Hi. I need help with my brand new Voicetronix OpenLine4 board that I installed into Asterisk. After building the Linux device driver and inserting the module, I modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the US settings and comment out the Austrailian ones. I made the appropriate entries for routing in vpb.conf and extensions.conf.... All appears to be well, except

Is anyone using the VoiceTronic Openline4 PCI (fxo) card? I am trying to setup Asterisk using a Digium 40B (4 port fxs) and an OpenLine4 (4 port fxo), however I can't find any examples or post that utilize this card. I have my stations (Sayson 390) ringing each other, but haven't had any success ringing out. I have the OpenLine4 loaded and all of the new drivers working good, just

Hi all, Can somebody help me get my OpenLine4 card running with asterisk@home? I've got my VPB drivers configured, but can't figure out how to map trunks and channels the typical way in the AMP config interface for Asterisk@home. Apparently I'm supposed to use /vpb/1 type commands, but I'm not sure how it should work. I'm relatively new to asterisk, I did a bunch of

hi there, i've been able to successfully run asterisk with the Voicetronix OpenLine4 card, it can accept calls and function normally. The only problem I'm experiencing so far is getting the card to outdial to a third party. What I'm trying to achieve is basically call bridging, where the caller dials in to asterisk, some IVR plays and then attempts to perform a "transfer"

Hi I would like your comments on the openline4 card from voicetronix. I am trying to get one working and find it difficult. I was able to get asterisk working yesterday but now it doesn't work anymore While it worked I was able to make some calls and I heard a lot of jitter Any comments appreciated. Patrick

Hello, list, I am using Asterisk with an OpenLine4 card. It worked well with Asterisk 1.0. Then I upgraded the system, Asterisk 1.4 had some problem to compile chan_vpb, but I managed to compile it manually. Still Asterisk does not work because it refused to load chan_vpb module. I had to revert back to install Asterisk 1.2. Then I get a error: asterisk: hip.cpp:793:

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

Hi all, I think I've got the V4PCI card working with asterisk (can't tell for sure, can't dial out since the card doesn't appear to understand 2 or 3 dtmf codes, if you've seen that before, let me know). Has anyone else had problems/successes with those cards before though? Thanks, Andrew Griffiths

Hello, is there something wrong with using has_one to implement Class Table Inheritance ? Eg. class Person < ActiveRecord::Base # attributes : eg. name, string end class Contact < Person # attributes : has_one :Person belongs_to :Company end Of course for a such simple case I could use Single Table Inheritance but this is only an example and I don''t like too much the

Hello all - I'm trying to get Asterisk working with an Openswitch/6 card with all ports set to FXO for PSTN in/out, and 10 SIP phones on the LAN with the Asterisk server. The SIP phones are working properly to dial one another, but I can't seem to get a call to go out to the PSTN through the voicetronix, and I similarly can't get incoming calls to the lines hooked up to the

thank you for your quick answer, I'm far of the digits capacity and my values are not the result of a computation. I'm developping a R package to acces a specific data source. And I need precision a few better. How can I do ? When I try this In R console, this is correct and what I need : > my_value <- 29.958334 > my_value == 29.958334 [1] TRUE But I need to do the first

Dear list, Here's a little problem I already solved with my own coding style, but I feel there is a more efficient and cleaner way to write it, but had no success finding the "clever" solution. I want to produce a factor from a subset of the combination of two vectors. I have the vectors a et b in a data-frame : > df <- expand.grid(a=c(0, 5, 10, 25, 50), b=c(0, 25, 50,

ok, sorry, my mistake was the C printf. Thank you for your good answer Regards ----- Message d'origine ---- De : JS Ubei <jsubei at yahoo.fr> ? : jim holtman <jholtman at gmail.com> Cc : r-help at r-project.org Envoy? le : Jeudi, 17 Juillet 2008, 15h25mn 07s Objet : [R] Re : float and double precision with C code thank you for your quick answer, I'm far of the digits

Hello all, We had an experimental system which works on OpenLine4 telephony card and Asterisk 1.0.9. Customer asked to upgrade Asterisk to 1.4, then we found our problem: At first Asterisk 1.4 does not compile chan_vpb.so. The problem is it tries to compile chan_vpb.cpp to chan_vpb.o and chan_vpb.oo, then try to link them together. I manually compiled it, then make went smoothly. But it

Hello all, I hope this is not off-topic, if it is please let me know. I'm currently playing with an Asterisk at home, in order to get to know it's ins and outs. Very very impressive indeed. I've got it hooked up to my home phone line via a Wildcard clone board (Intel modem with Ambient chipset), and it works like a charm. Zaptel picks up the card as a generic clone, and works with it

hi we need a predictive dialer which can be used with asterisk software. Is it possible? Bye Owais Bin Zuber --------------------------------- Do you Yahoo!? Yahoo! Search - Find what you’re looking for faster. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040310/a49a4b5c/attachment.htm

I use the E-series Nokia phones on my Wireless LAN. The e series have sip agent On 8/20/07, asterisk-users-request at lists.digium.com <asterisk-users-request at lists.digium.com> wrote: > Send asterisk-users mailing list submissions to > asterisk-users at lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit >

I am really struggling getting Asterisk up and running utilizing these two cards. Has anyone had success with this combination? If so, would you be ever so kind to submit sample vpb.conf,zaptel.conf,zapata.conf and extension.conf files??? With great thanks, Ronald R. McDaniel Southern Computer Services, Inc. rmcdaniel@southerncomp.net (251) 444-3136 office (251) 446-3137 fax (251)

Hello: I have successfully install spandsp and patch asterisk with it. But when I received a Fax is garble or shrink. Does any one know why???... Am using a PRI T100P card to receive the fax and save it to a tiff file... Any help will be greatly appreciated. Here are the versions. Latest csv from asterisk, spandsp-0.0.1k.tar.gz redhat 7.3 T100P has its own IRQ. Any help will be greatly