similar to: Opteron Hardware with Asterisk

I am about to build a Dual Opteron Asterisk box as our soon to be production server. Is Core 4 supported or should I stay with Core 3? There was a recent post about an issue with the latest Core 3 Kernel and zaptel. I had the same experience, but just rolled back to the previous version of the Kernel on Core 3 on our evaluation server. Thanks in advance

I am about to lease another server to be a backup web/mail server with a replicated mysql database. The current live server is a dual Xeon 2.8Ghz. Would I do better to get another Xeon server or an Opteron based server? My concerns are compatibility of the database and the SSL certificate currently running on the Xeon machine. Are these concerns unfounded? TIA Mike

Has anybody here taken a HDD configured with an Opteron system, and then put it into an Athlon/64 and had it work? Are they interchangeable, like an Athlon/32 and a P3/P4? -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978

i try another xen experiance on a AMD-Opteron 165 processor, but this happens: VmError: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS? cat /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 35 model name : Dual Core AMD Opteron(tm) Processor 165 stepping : 2 cpu MHz : 1000.000

I'm spec-ing a development server for some Haskell hackers. In particular, they need to be able to build and run the Glasgow Haskell Compiler (ghc), the x86_64 port of which isn't quite there yet. My current thought is to get an Opteron-based system, but load it (initially, at least) with the 32-bit i386 version of CentOS. That buys me near-term ghc compatibility. In the future,

Hello, We have a few systems where udevd seems to failing silently on Opteron based Centos 4 boxes. Has anyone else seen this? -geoff

Dear R-help: Has anyone tried using R on the the AMD Opteron in either 64- or 32-bit mode? If so, any good/bad experiences, comments, etc? We are considering getting this hardware, and would like to know if R can run smoothly on such a beast. Any comment much appreciated. Best, Andy Andy Liaw, PhD Biometrics Research PO Box 2000, RY33-300 Merck Research Labs Rahway, NJ

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

Hello to all, I''ve lucked onto a case of Opteron 850''s and hope to try some 4 way and 8 way systems with Xen. Can someone recommend a good 8x or even 4x socket 940 board that will be condusive to a good experience with Xen? This will be only for Paravirtualized guests (3.0.4). My hope is to play more with Xen''s credit scheduler and try some of the arch mixing

> I have been looking at XenSource 3.0 solution for running virtual > servers on opteron servers. According to XenSource''s documentation, it > runs on Opterons with pacifica feature. My understanding is that we > need this feature for following reaons: > - lower virtualization overhead. Theoretically, 3-5% overhead for > guest oses when virtualized > - running guest

Hi I'm setting up a SIP gateway, serving quite a few potential users, and I wonder if I should purchase a Opteron or Xeon based system. Xeon has it's HT, but is it worth it? Has anyone tested Opteron on asterisk? Does it work well? There'll be no transcoding in this system - G.711A all way through roy

> From: Douglas Bates [mailto:bates at bates4.stat.wisc.edu] > > "Liaw, Andy" <andy_liaw at merck.com> writes: > > > Sorry. I need to retract my claim. There seems to be a 3G > limit, even > > though the OS could handle nearly 8G. (I can have two > simultaneous R > > processes each using near 3G.) > > > > On another note, on

> From: Douglas Bates [mailto:bates at bates4.stat.wisc.edu] > > "Liaw, Andy" <andy_liaw at merck.com> writes: > > > Sorry. I need to retract my claim. There seems to be a 3G > limit, even > > though the OS could handle nearly 8G. (I can have two > simultaneous R > > processes each using near 3G.) > > > > On another note, on

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good Morning, Any help would be grateful to help me understanding what's wrong... I have bought 2 g729a licenses to digium and I would like to have them works... My processor is an Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (4 processors) so I have downloaded the

Hi, I have a HP DL 585 server with Quad Opteron processors and 32 Gbytes of RAM. I would like to know whether CentOS 3.5 x86_64 will recognize all 4 CPUs and 32 Gbytes of RAM. I will also running EDA tools like PriteTime, and Magma on this server. Does CentOS has any issues with these tools? your help on this question is appreciated. Thanks Siva. -------------- next part -------------- An

Dear All, Just returned from vacation and was delighted to see that Centos 4.2 is now on the mirrors. Unfortunately the new i386 version is giving us problems on our dual Opteron workstations with Nvidia graphics cards... Basically, nine times out of ten, the boxes will hang when they try to re-load X... and just sit there with the keyboards Caps and Scroll lock LED's flashing. The only

Hi, I was wondering if anyone has had good experiences using R on Linux with dual AMD64 (Opteron) processors. I'm thinking of buying a couple of such servers, but I'd like to make sure R would work fine. The "R Installation and Administration" guide notes that there may be some problems with BLAS libraries. That's all I could find about R on AMD64. Please share your

Hi All, I've just started caring for a dual Opteron machine. It has a 3Ware 9500S-12 RAID controller, a Tyan S2882G3NR motherboard, 10 IBM 400GB disk drives, and a 650 watt power supply. It has been behaving itself quite nicely until recently. The poor behavior started when I upgraded the OS from CentOS 4.1 (32 bit) to Centos 4.1 (x86_64). When running in uniprocessor mode, the system

Has anyone successfully compiled mpg123 in the 1.0.x or 1.2beta1 distributions (I'm running FC3 linux on an Opteron 2 processor system)? Are there any patches out there to make it work? gcc -DI386_ASSEM -DPENTIUM_OPT -DREAL_IS_FLOAT -DLINUX - DREAD_MMAP -DOSS -DTERM_CONTROL -Wall -O2 - m486 -fomit-frame-pointer -funroll-all- loops

I'm putting together a spec for a big(ger) memory x86_64 host, and I hope some of you-all can help. I'm looking for success stories of hardware that folks are using in production environments, preferably with CentOS 4, with more than 4GB of memory per CPU. I know there are lots of mobos out there that can do this, but I'm looking for what folks really have running. Call me