similar to: Play Dialtone - get digits

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

Hi, These days I run into something quite odd. I have an A@H that was modified to meet our requirements. We have a completely funtional DISA which we use pretty much all the time. I works flawlessly with incomming SIP calls from several providers, IAX calls from FWD and with ZAP. Recently we came out with a situation where it doesn't work... with a

Deutsche ?bersetzung folgt / German version following ===================================================== Hello, i have Asterisk running with 2 ISDN-Cards. One AVM Fritz for connection to german ISDN and one HFC-compatible-Card (NT mode) for connection to ISDN-Phone (later: ISDN-PBX). Here is my actual installation: ISDN -> Fritz - ASTERISK ? HFC-NT <- ISDN-Telephone If i pick up my

We are using DISA with local SIP users. The user enters in a 2 digit code then they get a dialtone and the phone dials out. The problem is that the calls waits 10 seconds after the outgoing number is dialed, no matter what I put for the timeout values. Anyone else using DISA that has run into this? exten => _2X,1,Answer exten => _2X,2,DigitTimeout(2) exten =>

Hi, Is it possible with asterisk to deliver a dialtone to a software phone, such as kphone? I'm able to dial, but the silence seems to confuse my users :) thanks, lane

Hi, I have just setup a DISA setup whereby people can dial in, authenticate, are given a dialtone and can then call out. Everything works however there is a 10 second delay after the user enters the number and presses #, until the system does anything. Here is the relevant section from my extensions.conf: -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Folks, I'm trying to test out Asterisk overall. I'm having some problems with DTMF. Currently I'm playing with DISA, but I'm worried this will happen when I get to implementing AAs etc. I have a free SIP trunk from IPKall that I'm trying to make work. I'm able to receive calls, and I've now setup and extension with DISA and a password. I connect ok from the

I am a little green when it comes to all this but I am trying to connect our PBX to an asterisk server using a TDM400 with 4 FXO modules. I am able to dial an extension on my PBX handset and I get a dialtone from the PBX. After 2 rings I then hear the asterisk server connect and I get a dialtone from asterisk. I am then able to dial an extension on another asterisk server. My question is: How do

Hello, Here's what I'd like to do: call my Asterisk box from a phone, hangup after a few rings, then Asterisk calls me back and presents a dialtone, than I can dial any valid number in the context the call originated. I've done it with CAPI (thanks to the script on http://www.junghanns.net/asterisk/page14.html), I'd like to do it with H323. Problem is, how to present a

Greetings Asterisk users! I'm trying to setup Asterisk system to act as a callback system together with callcentric (http://callcentric.com) but it appears that I hit common DTMF issue and I want to workaround this problem. Basically my current setup is the following: 1) I have dedicated Asterisk server that it is linked to my callcentric account 2) I have US phone number (DID) from

I would like the ability for a sipura sip device to instantly connect to an asterisk server as soon as the sipura sip device goes offhook and before any digits are pressed. This way asterisk can provide the dialtone and the dialplan. This also allows me to play a greeting to the phone before giving them a dialtone. Is there any way to do this, like possibly having the sipura device dial a

I can dial from an asterisk host to another one via FreeWorldDialup, on the other side DISA service answer to me and i can ear dialtone. But i cannot send DTMF and dial an extension on the DISA enabled asterisk.....i've tried rfc2833 and inband...but nothing....any tips ??? Thanks, -- Igor Barsanti GPG Public key available at http://pgp.mit.edu

say I needed to send a broadcast message that I wanted every user to hear when the pick up thier phone? can I "Play,message" on a line just before they get dialtone? or maybe after they dial before ring? how about a "ringdown" to a voicemail box and on end return them to thier line for the dialout? can * do ringdowns? when a user picks up an extension it automagically

Hi everybody, I am having DTMF detection problem on DISA with my callback system. For many users, it keeps playing the dialtone even after they have input their number. I have trunk setup to both g729 and ulaw. What could be the reason for this problem. Some users have to dial a few times before the system can recognize their dialed number. -- Zeeshan A Zakaria -------------- next part

> I'd like to create the following: a user picks up the phone > (gets a dial tone), dials '0' for an 'outside' line, gets a > second (different?) dialtone, and is able to enter an > external phone number. Klaus-Peter Junghanns has something like this on his page: http://83.137.99.170/jn/relaunch/asterisk/page19.html It didn't work for me correctly so I

First, please forgive me if this is a total newbie question, I've only just begun to scratch the surface of asterisk. I currently have a dialplan set up to let me dial a specific extension, authenticate the user, then have * dial a hard coded/programmed overseas number. What I would like to do is set up my dialplan to have an extension that offers up an outbound dialtone allowing the

Hi all, How can I configure, in extension.conf, to call and extension and have a dialtone so I can compose a number to dialout? Basically, I want to be able, when I am out of the office, to call in my asterisk box and then dialout from it. Regards, Francois

When using a channel bank for analog handsets, you have a couple options in the way you handle transactions involving the analog handsets and origination. With immediate set to no, it appears to me that soon as a digit is pressed after going off-hook, the single digit is taken and processed against the context that the channel is associated with from the configuration in zapata.conf. With

Guys.. Im new to asterisk but is it possible to simulate a dialtone for example, in other PBX when you pick up the phone you can hear a certain dialup, which is the PBX dialtone, and when you hit 9, you can hear the PSTN dialtone, is this possible? __________________________________________________________________ Anton Krall

I've commited changes to Voicemail2: * Handle properly when being left a message while checking VM -- this should fix the "saving to your inbox" issue too, at least in principle. And to DISA: * Properly handle extensions with multiple matches and "dots" Please let me know on or off list about any feedback you have regarding these changes. Mark