similar to: Cisco Call Manager with Voicemail on Asterisk Problem

I found with some more testing that you have to setup a 5 digit number (or something longer than your phone extensions) to make the voicemail work. Now the trick is making the MWI work. Rick -----Original Message----- From: Lull, Rick Sent: Friday, July 15, 2005 3:55 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: VM on * for CME Install Hi folks- I've

Hi folks- I've got to the point of trying to configure voice mail on the * box for the SCCP/CME phones. The phone can call the voicemail number (8500) and I can hear Allison's voice. Attempts to punch in a voicemail box number or password don't seem to register; keypad presses don't seem to be heard by the * box. The CME configuration has the 'dtmf-relay rtp-nte' command

Hi folks- I'm working on getting a test Call Manager Express system working with Asterisk. My plan is to have * support all the voicemail boxes for the CME/SCCP phones. Right now, I can call from a SIP phone to a SCCP phone and back fine. Calls go from Phone->CME->*->Phone and the reverse. Voicemail works for my SIP phones, but does not work for the SCCP phones. I tried to follow

su testuser11 cd /storage/CME/test No problem. But when I try to access the same directory in windows I get these entries in my logs.... /var/log/samba/log.smbd ------------------ [2010/01/04 16:08:25, 1] smbd/sesssetup.c:reply_spnego_kerberos(350) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! log.winbindd reports no errors so it seems that the SIU/UID mapping

Is there a way to have a fallback for a relayed mountpoint ? Something like this ? <relay> <server>192.128.0.2</server> <port>8000</port> <mount>/arelayer</mount> <local-mount>/arvorig</local-mount> <fallback-mount>/secours</fallback-mount>

Hi All, I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in

Hello We have integrated cisco callmanager 4.1 with asterisk and we can dial from cisco to asterisk but we're getting an error if we call from asterisk to callmanager. This is the error I'm getting anybody can help me? Verbosity is at least 3 -- Executing Dial("SIP/2234-e084", "SIP/cme-pbx/4455") in new stack -- Called cme-pbx/4455 -- SIP/cme-pbx-25ae is

First, the scenarios: Call placed from Boston to locally configured Asterisk Meetme extension: Cisco 7941 <-SCCP-> Cisco 2821(CME,Boston) <-SIP-> Asterisk(Boston) Call placed from Boston to European Asterisk Meetme extension: Cisco 7941 <-SCCP-> Cisco 2821(CME,Boston) <-SIP-> Cisco 2821(CME,Europe) <-SIP-> Asterisk(Boston) In the 1st scenario, everything works

I was thinking about complicating my Voip setup by adding CME. I found this example here: http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Express+Integration and here: http://www.pasewaldt.com/cme/cme_index.htm Would anyone like to comment on their experiences using CME with Asterisk... I would like one of my Cisco phones to remain SIP connected directly to my Asterisk system. The

Hi all, I'm trying to trunk my asterisk with a cisco cme 3.3 using h323. Cisco conf: dial-peer voice 8 voip destination-pattern 2... session target ipv4:<asterisk ip> codec g711alaw no vad h323.conf [general] port = 1720 bindaddr = 0.0.0.0 ;tos=lowdelay ; disallow=all allow=alaw allow=ulaw allow=gsm context=from-internal extension.conf [from-internal] exten =>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I'm working on sip trunk between cme 4.x and asterisk (trixbox 1.2.3). Well, the trunk is partially working, asterisk' extensions talk with cme, but - - when cme try to connect to asterisk' number, receives "the number dialed is not in service". - - calls from ISP through asterisk to cme don't work completely,

Hi, I'm trying to get a remote Cisco Call Manager Express (CME) system behind a dynamic IP address routing both inbound and outbound calls via SIP to my local asterisk server. I've got a local CME system working fine on the LAN, where the CME is at a static IP (host=10.5.7.130 in sip.conf), but I can't figure out how to get it working with host=dynamic, even locally on a test

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I've this infrastructure: |voip services| -- |*| -- |cme| -- |isdn| the voip services are logged on my *, then forwarded to number 601 on cme. The isdn calls too are forwarded to 601. On cme I've a timeout X for call-forward noan (no answer) to a specific number on * (5901) that is my x-lite software client. If 5901 is

Hello Robert, You said that the script worked when you ran it with sieve-test, proabably as root user, but not when you sent an e-mail with sendmail, which I guess would run it as the dovecot user (probably vmail as you said you changed the ownership of the e-mail to vmail:mail ?) You forgot to show us the file permissions on the script and the folder containing it. A namei -l on the whole path

Hi I have an icecast server that relay a remote stream, with a local fallback mountpoint. When I unplug the network cable (just for test), icecast falls back to the local mountpoint after a few seconds. When I re-plug, I have to wait 1or 2 minutes before moving back to the remote stream. Why is it so long ? I'm using the default parameters, with a 128 kbps stream. <icecast>

I am starting to work on a similar solution, but with full call manager rather than CME. I am going to use Asterisk to accept POTS calls through PCI FXO ports (winmodems) and then forward the calls through to call manager via SIP. I don't have my FXO cards yet (waiting for UPS man!!) but I have * talking to the CM through SIP just fine. I am testing with the Cisco softphone, connected as a

Hi All, We have a Cisco CME linked to our Asterisk PBX (named 'epstein'). Off said PBX we have numerous other PBX's, some IAX and some SIP. On a call placed from CME (SIP) to 'epstein' it all works fine except for a few quirks. When calling through epstein to an IAX peer we get '100 trying' followed by '180 ringing' sent back down the SIP leg to CME.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I would create a structure like this: external sip server \ external sip server |-----| Asterisk |------| Cisco CME |-------| ip phones | external sip server / I would use Asterisk as SIP client for some SIP accounts on external servers ... then register those via H323 (if possible; skynny?) on Cisco CME ... Then I would use Asterisk

Hello list. No intention to start a flamewar here but I would really like opinions from those who know both the Cisco and Asterisk system. I'm working for a company with 15 offices in 11 countries, offices are relatively small (3-20 people each) and most of them have a Cisco 1760 Router installed with Call manager express (CME) and 1-3 ISDN lines (2-6 simultaneous calls). We

https://bugzilla.mindrot.org/show_bug.cgi?id=3196 Bug ID: 3196 Summary: [Information Disclosure] OpenSSH_7.4p1 Raspbian-10+deb9u7 discloses OS version Product: Portable OpenSSH Version: 7.4p1 Hardware: Other OS: Other Status: NEW Severity: security Priority: P5