similar to: getting problem in Picking up the parked call

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

Greetings all, I'm trying to connect to an AT&T teleconference, but the call is never marked as ANSWERED by asterisk and therefore won't bridge and continue. The only work-around I've come up with so far is to dial like this: Exten => 744,1,Dial(Zap/g1,,p) The "private" mode keeps the line open without trying to do a bridge, but requires the

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi, I'm having trouble capturing calls using the chan_dahdi with dynamic span. Here my settings: chan_dahdi.conf [trunkgroups] [channels] context=default switchtype=national facilityenable=yes rxwink=300 ; Atlas seems to use long (250ms) winks ; where the ring cadence is changed *after* the callerid spill. usecallerid=yes hidecallerid=no

Hi, I recently moved all of my conf files over to a new Asterisk 1.2.4 server and every works except the features enabled in features.conf. Was there a syntax chnage in 1.2.4? Or is there something else... Here is my features.conf: ******************** [general] parkext => 880 ; What ext. to dial to park parkpos => 881-890 ; What extensions to park calls on context

I need attended transfers, but I do not have time to talk to another extension and see if they accept the transfer, my features.conf is: [general] parkext => 700 ; What ext. to dial to park parkpos => 701-720 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 220 ; Number of

Hi - I'm trying to implement the applicationmap stuff in features.conf, and I can't seem to get it to work. I'm testing it out on 1.2.2 with Polycom IP500s and Snom190s. My features.conf looks like this: [general] parkext => 700 parkpos => 701-720 context => parkedcalls parkingtime => 240 transferdigittimeout => 2 ;courtesytone = beep

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

Eric Wrote: ----------- The trick is not to use options you don't understand. "show application dial" will show you what the t and T options are for. Most people use the transfer feature of their phone, rather than using the T/t hack on the Dial line. Sounds like you are using CVS-HEAD and so will have to configure stuff in /etc/asterisk/features.conf. /Snip/ Eric, Thanks for

In features.conf, I have uncommented the transfer features under feature map, but I still cannot transfer using a POTS phone on an IAXy adapter. I think I am missing something here.... Any help is appreciated. Here is features.conf: ; ; Sample Parking configuration ; [general] parkext => 700 ; What extension to dial to park parkpos => 701-720 ;

I have put canreinvite=no for all my internal SIP-clients in sip.conf because I want Asterisk to be in the middle of the RTP-stream so he can provide MusiconHold and so... Now, what the Asterisk CLI tells me when I make a call from my one internal SIP-phone to another internal SIP-phone is : Verbosity is at least 25 == Spawn extension (intern, 51, 1) exited non-zero on

Hi all, I am having a couple of problems with features.conf I was hoping to get some help with. #1. If an outside caller is parked, when retrieved, that caller will now have the ability to transfer. This only happens when they are put in call parking and then retrieved. #2. I cannot get any other keys to register for features. For instance, I tried assigned blindxfer => *1, but both

Hi I'd like to allow users to transfer a call to a specific park number. This way, the receptionist can tranfer a call park for ext 100 at park number 7100 etc... It seems like this should be fairly simple using the Park(ext) app but it doesn't work for me. No matter what I extension I use, the system just picks the next available park number. I've simplified my dialplan for

Hi I have configured attended transfer in features.conf like this [general] parkext => 70 ; What ext. to dial to park parkpos => 00-99 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 300 ; Number of seconds a call can be parked for

Hi I am using Asterisk 1.2 and for the life of me, I am unable to transfer outbound calls (eg calls I initiate from sip extensions). When I press #, nothing happens. Inbound calls transfer fine, but only once per call. The problem happens: - With both software and hardware phones. - With calls going out through the ZAP channel and to internal SIP extensions. - After I have transferred an

Just upgraded to 1.8, we use the multi lot parking feature by dialling *4. We are not getting the parking slot announcement being played to the person who parks the call, so it's impossible to tell which slot they've gone into. Could someone check our config? On Debian Squeeze using packages from http://packages.asterisk.org/debsqueeze main (Asterisk 1.8.11.1-1digium1~squeeze)

Hi list, This wll be my first post, so I want to thank all the developers for the great product they have created. Now, the question, I have installed asterisk 1.05 on debian sarge (binary package) with an I4l modem and 4 x-lite softphone and 2 SIP hardphones (Yuxin 100) This all works fine, exept for som echo on the ISDN channel, but I'll replace the I4L card with an AVM-C4 card next

Hello, Recently we have been using asterisk 1.6 and everything worked ok, all our productions server are 1.6. Recently we have upgraded one to 1.8 and multiple parking call are not working, which worked pretty ok on asterisk 1.6. Are there any major changes in asterisk 1.8 related to park call and multiple parking lots. Bellow is my config from asterisk 1.6 which worked, I`ve tried this in 1.8

When I try to make attendend transfer (*2) this what hapends. I press *2 other person goes on hold and I hear "transfer". I press extension number and that extension starts to ring but I don't hear anything. If nobody picks up that phone call in few seconds I get back to the person I was talking to (the person I triesd to transfer). The problem is that again, I don't hear

Hi all. I am attempting to setup Asterisk to allow me to press *1 while in a call to use automon to record the call but have had absolutely no success. Is there a trick to this? In extensions.conf [globals] DYNAMIC_FEATURES=>automon [default] exten => 123,2,Dial(SIP/3000,,wW) ; wW allow one-touch recording During the call, I press *1 but it records nothing. David Morrow