Hi all. I am attempting to setup Asterisk to allow me to press *1 while in a call to use automon to record the call but have had absolutely no success. Is there a trick to this? In extensions.conf [globals] DYNAMIC_FEATURES=>automon [default] exten => 123,2,Dial(SIP/3000,,wW) ; wW allow one-touch recording During the call, I press *1 but it records nothing. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com <http://www.autodatasolutions.com/> Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net <mailto:Administrator@autodata.net> > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060510/3987163a/attachment.htm
2006/5/10, Dave Morrow <david.morrow@autodata.net>:> I am attempting to setup Asterisk to allow me to press *1 while in a call to > use automon to record the call but have had absolutely no success. Is there > a trick to this?May be a problem with the way you are sending the dialtones. Try sending as data. -- Alejandro Vargas
OK. You lost me. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alejandro Vargas Sent: Wednesday, May 10, 2006 10:29 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording 2006/5/10, Dave Morrow <david.morrow@autodata.net>:> I am attempting to setup Asterisk to allow me to press *1 while in a > call to use automon to record the call but have had absolutely no > success. Is there a trick to this?May be a problem with the way you are sending the dialtones. Try sending as data. -- Alejandro Vargas _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Thanks for the response. How would I change the DTMF transfer mode? David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Fabio Sent: Thursday, May 11, 2006 6:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] features.conf *1 Call Recording if you ar using SIP clients, try changing DTMF transfer mode. For test use> sip debugon your * console, then place a call and watch the output. In INFO or rfc2833 mode you must see the codes like SIP messages. If you are using inband transfer mode (DTMF codes are transferred like sounds) you don't see the codes. Also, try adjusting featuredigittimeout in features.conf: [general] featuredigittimeout = 2000 ; 2 seconds because the default 500ms is a very short time. Fabio Olaechea 3Tech SRL Calle 48 Nro 632, Of. 67. La Plata, CP B1900AMZ Buenos Aires, Argentina. Tel. +54 221 445 0244 Ext. 301 Fax. +54 221 445 0245 www.trestech.com.ar -----Mensaje original----- De: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]En nombre de Dave Morrow Enviado el: Miercoles, 10 de Mayo de 2006 02:48 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] features.conf *1 Call Recording OK. You lost me. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alejandro Vargas Sent: Wednesday, May 10, 2006 10:29 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording 2006/5/10, Dave Morrow <david.morrow@autodata.net>:> I am attempting to setup Asterisk to allow me to press *1 while in a > call to use automon to record the call but have had absolutely no > success. Is there a trick to this?May be a problem with the way you are sending the dialtones. Try sending as data. -- Alejandro Vargas _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Yes. I did. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com <http://www.autodatasolutions.com/> Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net <mailto:Administrator@autodata.net> > ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Giridhar Reddy Bandi Sent: Friday, May 12, 2006 3:41 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording did you include automon => *1 in your features.conf ?? it should be somthing like this [featuremap] automon => *1 --Giridhar Bandi On 5/12/06, Dave Morrow <david.morrow@autodata.net> wrote: Thanks for the response. How would I change the DTMF transfer mode? David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto: Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Fabio Sent: Thursday, May 11, 2006 6:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] features.conf *1 Call Recording if you ar using SIP clients, try changing DTMF transfer mode. For test use > sip debug on your * console, then place a call and watch the output. In INFO or rfc2833 mode you must see the codes like SIP messages. If you are using inband transfer mode (DTMF codes are transferred like sounds) you don't see the codes. Also, try adjusting featuredigittimeout in features.conf : [general] featuredigittimeout = 2000 ; 2 seconds because the default 500ms is a very short time. Fabio Olaechea 3Tech SRL Calle 48 Nro 632, Of. 67. La Plata, CP B1900AMZ Buenos Aires, Argentina. Tel. +54 221 445 0244 Ext. 301 Fax. +54 221 445 0245 www.trestech.com.ar -----Mensaje original----- De: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]En nombre de Dave Morrow Enviado el: Miercoles, 10 de Mayo de 2006 02:48 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] features.conf *1 Call Recording OK. You lost me. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alejandro Vargas Sent: Wednesday, May 10, 2006 10:29 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording 2006/5/10, Dave Morrow <david.morrow@autodata.net >: > I am attempting to setup Asterisk to allow me to press *1 while in a > call to use automon to record the call but have had absolutely no > success. Is there a trick to this? May be a problem with the way you are sending the dialtones. Try sending as data. -- Alejandro Vargas _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060512/2c68fd99/attachment.htm
All I see when I press *1 is
-- Attempting native bridge of SIP/8001-252e and SIP/3020-5171
I still cannot make this work.
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com <http://www.autodatasolutions.com/>
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator@autodata.net <mailto:Administrator@autodata.net
<mailto:Administrator@autodata.net> >
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Dave
Morrow
Sent: Friday, May 12, 2006 8:39 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] features.conf *1 Call Recording
Yes. I did.
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com <http://www.autodatasolutions.com/>
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator@autodata.net <mailto:Administrator@autodata.net
<mailto:Administrator@autodata.net> >
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Giridhar
Reddy Bandi
Sent: Friday, May 12, 2006 3:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] features.conf *1 Call Recording
did you include automon => *1 in your features.conf ??
it should be somthing like this
[featuremap]
automon => *1
--Giridhar Bandi
On 5/12/06, Dave Morrow <david.morrow@autodata.net> wrote:
Thanks for the response. How would I change the DTMF transfer
mode?
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The
attached
material is the Confidential and Proprietary Information of
Autodata
Solutions. This email and any files transmitted with it are
confidential
and intended solely for the use of the individual or entity to
whom they
are addressed. If you have received this email in error please
delete
this message and notify the Autodata system administrator at
Administrator@autodata.net <mailto: Administrator@autodata.net>
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
Fabio
Sent: Thursday, May 11, 2006 6:55 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] features.conf *1 Call Recording
if you ar using SIP clients, try changing DTMF transfer mode.
For test use
> sip debug
on your * console, then place a call and watch the output. In
INFO or
rfc2833 mode you must see the codes like SIP messages. If you
are using
inband transfer mode (DTMF codes are transferred like sounds)
you don't
see the codes.
Also, try adjusting featuredigittimeout in features.conf :
[general]
featuredigittimeout = 2000 ; 2 seconds
because the default 500ms is a very short time.
Fabio Olaechea
3Tech SRL
Calle 48 Nro 632, Of. 67.
La Plata, CP B1900AMZ
Buenos Aires, Argentina.
Tel. +54 221 445 0244 Ext. 301
Fax. +54 221 445 0245
www.trestech.com.ar
-----Mensaje original-----
De: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]En nombre de
Dave Morrow
Enviado el: Miercoles, 10 de Mayo de 2006 02:48 p.m.
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Asunto: RE: [Asterisk-Users] features.conf *1 Call Recording
OK. You lost me.
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The
attached
material is the Confidential and Proprietary Information of
Autodata
Solutions. This email and any files transmitted with it are
confidential
and intended solely for the use of the individual or entity to
whom they
are addressed. If you have received this email in error please
delete
this message and notify the Autodata system administrator at
Administrator@autodata.net <mailto:Administrator@autodata.net>
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
Alejandro
Vargas
Sent: Wednesday, May 10, 2006 10:29 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] features.conf *1 Call Recording
2006/5/10, Dave Morrow <david.morrow@autodata.net >:
> I am attempting to setup Asterisk to allow me to press *1
while in a
> call to use automon to record the call but have had absolutely
no
> success. Is there a trick to this?
May be a problem with the way you are sending the dialtones. Try
sending
as data.
--
Alejandro Vargas
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060512/5f46f70e/attachment.htm
It's quite strange. When I press *1 I do not hear a tone indicated that it's even trying to record. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com <http://www.autodatasolutions.com/> Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net <mailto:Administrator@autodata.net> > ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Dave Morrow Sent: Friday, May 12, 2006 8:39 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] features.conf *1 Call Recording Yes. I did. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com <http://www.autodatasolutions.com/> Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net <mailto:Administrator@autodata.net> > ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Giridhar Reddy Bandi Sent: Friday, May 12, 2006 3:41 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording did you include automon => *1 in your features.conf ?? it should be somthing like this [featuremap] automon => *1 --Giridhar Bandi On 5/12/06, Dave Morrow <david.morrow@autodata.net> wrote: Thanks for the response. How would I change the DTMF transfer mode? David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto: Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Fabio Sent: Thursday, May 11, 2006 6:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] features.conf *1 Call Recording if you ar using SIP clients, try changing DTMF transfer mode. For test use > sip debug on your * console, then place a call and watch the output. In INFO or rfc2833 mode you must see the codes like SIP messages. If you are using inband transfer mode (DTMF codes are transferred like sounds) you don't see the codes. Also, try adjusting featuredigittimeout in features.conf : [general] featuredigittimeout = 2000 ; 2 seconds because the default 500ms is a very short time. Fabio Olaechea 3Tech SRL Calle 48 Nro 632, Of. 67. La Plata, CP B1900AMZ Buenos Aires, Argentina. Tel. +54 221 445 0244 Ext. 301 Fax. +54 221 445 0245 www.trestech.com.ar -----Mensaje original----- De: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]En nombre de Dave Morrow Enviado el: Miercoles, 10 de Mayo de 2006 02:48 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] features.conf *1 Call Recording OK. You lost me. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alejandro Vargas Sent: Wednesday, May 10, 2006 10:29 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording 2006/5/10, Dave Morrow <david.morrow@autodata.net >: > I am attempting to setup Asterisk to allow me to press *1 while in a > call to use automon to record the call but have had absolutely no > success. Is there a trick to this? May be a problem with the way you are sending the dialtones. Try sending as data. -- Alejandro Vargas _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060512/529ff4f7/attachment.htm
I have one Sipura SPA-841 which is configured to use dtmfmode=info and
one Cisco 7905 which is using the default signalling (I believe this is
rfc2833)
I have also set relaxdtmf=yes in sip.conf
I've tried pressing *1 on both phones (they are both on my desk) and
both behave the same.
;
; Sample Parking configuration
;
[general]
parkext => 700 ; What ext. to dial to park
parkpos => 701-720 ; What extensions to park calls on
context => parkedcalls ; Which context parked calls are in
;parkingtime => 45 ; Number of seconds a call can be parked
for
; (default is 45 seconds)
;transferdigittimeout => 3 ; Number of seconds to wait between
digits when transfering a call
;courtesytone = beep ; Sound file to play to the parked
caller
; when someone dials a parked call
;xfersound = beep ; to indicate an attended transfer is
complete
;xferfailsound = beeperr ; to indicate a failed transfer
;adsipark = yes ; if you want ADSI parking announcements
;findslot => next ; Continue to the 'next' parking
space.
Defaults to 'first' available
;pickupexten = *8 ; Configure the pickup extension.
Default is *8
featuredigittimeout = 2000 ; Max time (ms) between digits for
; feature activation. Default is 500
[featuremap]
blindxfer => #1 ; Blind transfer
disconnect => *0 ; Disconnect
automon => *1 ; One Touch Record
atxfer => *2 ; Attended transfer
[applicationmap]
;testfeature => #9,callee,Playback,tt-monkeys ;Play tt-monkes to
;callee if #9 was
pressed
~
~
~
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com <http://www.autodatasolutions.com/>
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator@autodata.net <mailto:Administrator@autodata.net
<mailto:Administrator@autodata.net> >
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Giridhar
Reddy Bandi
Sent: Friday, May 12, 2006 12:55 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] features.conf *1 Call Recording
hi Dave
i get the following log on *CLI>
-- Attempting native bridge of SIP/200-39f4 and SIP/204-2ce4
-- Playing 'beep' (language 'en')
-- User hit '*1' to record call. filename:
wav|auto-1147452537-200-204|m
-- Playing 'beep' (language 'en')
-- User hit '*1' to stop recording call.
-- Attempting native bridge of SIP/200-39f4 and SIP/204-2ce4
what are you using as SIP client ( imean softphone/ analog phone + ATA /
IPphone ) ?
if you are using a softphone and that doesnot have a dtmf signaling then
asterisk will not
be able to recognize that you are pressing.
--Giridhar Bandi
On 5/12/06, Dave Morrow <david.morrow@autodata.net> wrote:
It's quite strange. When I press *1 I do not hear a tone
indicated that it's even trying to record.
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com
<http://www.autodatasolutions.com/>
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The
attached material is the Confidential and Proprietary Information of
Autodata Solutions. This email and any files transmitted with it are
confidential and intended solely for the use of the individual or entity
to whom they are addressed. If you have received this email in error
please delete this message and notify the Autodata system administrator
at
Administrator@autodata.net <mailto:Administrator@autodata.net
<mailto:Administrator@autodata.net> >
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Dave
Morrow
Sent: Friday, May 12, 2006 8:39 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] features.conf *1 Call Recording
Yes. I did.
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com
<http://www.autodatasolutions.com/>
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The
attached material is the Confidential and Proprietary Information of
Autodata Solutions. This email and any files transmitted with it are
confidential and intended solely for the use of the individual or entity
to whom they are addressed. If you have received this email in error
please delete this message and notify the Autodata system administrator
at
Administrator@autodata.net <mailto:Administrator@autodata.net
<mailto:Administrator@autodata.net> >
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Giridhar
Reddy Bandi
Sent: Friday, May 12, 2006 3:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] features.conf *1 Call Recording
did you include automon => *1 in your features.conf ??
it should be somthing like this
[featuremap]
automon => *1
--Giridhar Bandi
On 5/12/06, Dave Morrow <david.morrow@autodata.net> wrote:
Thanks for the response. How would I change the DTMF
transfer mode?
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The
attached
material is the Confidential and Proprietary Information
of Autodata
Solutions. This email and any files transmitted with it
are confidential
and intended solely for the use of the individual or
entity to whom they
are addressed. If you have received this email in error
please delete
this message and notify the Autodata system
administrator at
Administrator@autodata.net <mailto:
Administrator@autodata.net>
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On
Behalf Of Fabio
Sent: Thursday, May 11, 2006 6:55 PM
To: Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: RE: [Asterisk-Users] features.conf *1 Call
Recording
if you ar using SIP clients, try changing DTMF transfer
mode.
For test use
> sip debug
on your * console, then place a call and watch the
output. In INFO or
rfc2833 mode you must see the codes like SIP messages.
If you are using
inband transfer mode (DTMF codes are transferred like
sounds) you don't
see the codes.
Also, try adjusting featuredigittimeout in features.conf
:
[general]
featuredigittimeout = 2000 ; 2 seconds
because the default 500ms is a very short time.
Fabio Olaechea
3Tech SRL
Calle 48 Nro 632, Of. 67.
La Plata, CP B1900AMZ
Buenos Aires, Argentina.
Tel. +54 221 445 0244 Ext. 301
Fax. +54 221 445 0245
www.trestech.com.ar
-----Mensaje original-----
De: asterisk-users-bounces@lists.digium.com
[mailto: asterisk-users-bounces@lists.digium.com
<mailto:asterisk-users-bounces@lists.digium.com> ]En nombre de Dave
Morrow
Enviado el: Miercoles, 10 de Mayo de 2006 02:48 p.m.
Para: Asterisk Users Mailing List - Non-Commercial
Discussion
Asunto: RE: [Asterisk-Users] features.conf *1 Call
Recording
OK. You lost me.
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow@Autodata.net
http://www.autodatasolutions.com
Tel: (519) 963-3020
Fax: (519) 451-6615
< Lead, follow or get out of the way! >
This message has originated from Autodata Solutions. The
attached
material is the Confidential and Proprietary Information
of Autodata
Solutions. This email and any files transmitted with it
are confidential
and intended solely for the use of the individual or
entity to whom they
are addressed. If you have received this email in error
please delete
this message and notify the Autodata system
administrator at
Administrator@autodata.net
<mailto:Administrator@autodata.net>
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto: asterisk-users-bounces@lists.digium.com
<mailto:asterisk-users-bounces@lists.digium.com> ] On Behalf Of
Alejandro
Vargas
Sent: Wednesday, May 10, 2006 10:29 AM
To: Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] features.conf *1 Call
Recording
2006/5/10, Dave Morrow <david.morrow@autodata.net >:
> I am attempting to setup Asterisk to allow me to press
*1 while in a
> call to use automon to record the call but have had
absolutely no
> success. Is there a trick to this?
May be a problem with the way you are sending the
dialtones. Try sending
as data.
--
Alejandro Vargas
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060512/180c14ae/attachment.htm
I found the issue. It was my Dial command! In my dialplan I had Dial(SIP/100|20|Ttr,,wW) as this was something I gleaned from a sample config for call forwarding. I removed the |20|Ttr and now the call recording works! Anyone know what the |20|Ttr did anyhow? David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com <http://www.autodatasolutions.com/> Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net <mailto:Administrator@autodata.net> > ________________________________ From: Dave Morrow Sent: Friday, May 12, 2006 10:41 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] features.conf *1 Call Recording It's quite strange. When I press *1 I do not hear a tone indicated that it's even trying to record. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com <http://www.autodatasolutions.com/> Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net <mailto:Administrator@autodata.net> > ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Dave Morrow Sent: Friday, May 12, 2006 8:39 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] features.conf *1 Call Recording Yes. I did. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com <http://www.autodatasolutions.com/> Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net <mailto:Administrator@autodata.net> > ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Giridhar Reddy Bandi Sent: Friday, May 12, 2006 3:41 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording did you include automon => *1 in your features.conf ?? it should be somthing like this [featuremap] automon => *1 --Giridhar Bandi On 5/12/06, Dave Morrow <david.morrow@autodata.net> wrote: Thanks for the response. How would I change the DTMF transfer mode? David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto: Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Fabio Sent: Thursday, May 11, 2006 6:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] features.conf *1 Call Recording if you ar using SIP clients, try changing DTMF transfer mode. For test use > sip debug on your * console, then place a call and watch the output. In INFO or rfc2833 mode you must see the codes like SIP messages. If you are using inband transfer mode (DTMF codes are transferred like sounds) you don't see the codes. Also, try adjusting featuredigittimeout in features.conf : [general] featuredigittimeout = 2000 ; 2 seconds because the default 500ms is a very short time. Fabio Olaechea 3Tech SRL Calle 48 Nro 632, Of. 67. La Plata, CP B1900AMZ Buenos Aires, Argentina. Tel. +54 221 445 0244 Ext. 301 Fax. +54 221 445 0245 www.trestech.com.ar -----Mensaje original----- De: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]En nombre de Dave Morrow Enviado el: Miercoles, 10 de Mayo de 2006 02:48 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] features.conf *1 Call Recording OK. You lost me. David Morrow Technical Systems Lead Autodata Solutions Company David.Morrow@Autodata.net http://www.autodatasolutions.com Tel: (519) 963-3020 Fax: (519) 451-6615 < Lead, follow or get out of the way! > This message has originated from Autodata Solutions. The attached material is the Confidential and Proprietary Information of Autodata Solutions. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete this message and notify the Autodata system administrator at Administrator@autodata.net <mailto:Administrator@autodata.net> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alejandro Vargas Sent: Wednesday, May 10, 2006 10:29 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] features.conf *1 Call Recording 2006/5/10, Dave Morrow <david.morrow@autodata.net >: > I am attempting to setup Asterisk to allow me to press *1 while in a > call to use automon to record the call but have had absolutely no > success. Is there a trick to this? May be a problem with the way you are sending the dialtones. Try sending as data. -- Alejandro Vargas _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060512/87673cc3/attachment.htm
gary@dltwireless.com
2006-May-12 19:34 UTC
[Asterisk-Users] features.conf *1 Call Recording
Please change the email address of gary@dltwireless.com to gwinton@lwedge.com Thanks
gary@dltwireless.com
2006-May-12 19:43 UTC
[Asterisk-Users] features.conf *1 Call Recording
Please change the email address of gary@dltwireless.com to gwinton@lwedge.com Thanks
gary@dltwireless.com
2006-May-12 19:50 UTC
[Asterisk-Users] features.conf *1 Call Recording
Please change the email address of gary@dltwireless.com to gwinton@lwedge.com Thanks
gary@dltwireless.com
2006-May-12 19:58 UTC
[Asterisk-Users] features.conf *1 Call Recording
Please change the email address of gary@dltwireless.com to gwinton@lwedge.com Thanks