similar to: Asterisk Quit Registering with Broadvoice

Hi all, I just upgraded to Asterisk 1.4.18 a few days ago and I don't use Broadvoice TOO often, however I have a Vermont number with them and so my mother in law calls it to talk to my wife once in a while, so that's why it took me so long to notice it wasn't working. Anyway, when she calls she gets a busy signal (as I've tested when calling it from my cell). When I enable

I'm still not getting my outbound to work. I've seen two patches relevant to broadvoice for chan_sip.c which apparently have already been added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk doesn't seem to know they're gone though. I called my cell w/ broadvoice and turned on sip debug AFTer the call had physically dropped: *CLI> sip show registry

*sigh* Ok, I have fought and fought with this. I have read all the FAQ's, I have scanned the list archives. I can receive calls on * from my Broadvoice acct, but I cannot place calls... I have the 'World Unlimited' plan, and like 5 area codes that are local to me in Dallas. Can anyone help me? here are my config files... - sip.conf - [general] context=default ;

Hello everyone, Well here is my initial posting to the list, and I will admit Asterisk is new to me. I just got everything running here a couple days ago, so still learning the ropes for sure. OK, here is my problem. Currently I have it setup talking to a couple Cisco IP phones, and some Xten softphones, this works great. I also got an account with FreeWorld Dialup using IAX2 and that

I'm at a loss as to why my * box dosnt want to play nicely with Broadvoice. Here is what my log files are showing: Jul 28 16:33:43 NOTICE[1187]: -- Registration for '2017540019@proxy.dca.broadvoice.com@proxy.dca.broadvoice.com' timed out, trying again Jul 28 16:33:43 DEBUG[1187]: Scheduled a registration timeout # 108 Jul 28 16:33:43 DEBUG[1187]: Stopping retransmission on

I'm experiencing a "Failed to authenticate on INVITE" error (see output below) whenever I try to MAKE a call through the Broadvoice account. I noticed some others had the same problem but it went away when they rebuilt Asteris w/ a new version. N such luck for me! I'd be grateful for any assitance. Here's what I've done so far: 1) I downloaded the latest stable

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

Outward dialing is a no brainer. VoipJet is the best outbound call provider I have come across. Period. It always works for me and the call quality is always very very good. So far that seems to be the norm for them. I am still working on getting my inward DIDs solidified so no opinion there... W -----Original Message----- From: asterisk-users-bounces@lists.digium.com

I've setup Asterisk to work with Broadvoice for both incoming and outgoing calls. I can make outgoing calls, but when I try to receive an incoming call I see the following message on the console: [date] NOTICE[8661]: chan_sip.c:13178 handle_request_invite: Unable to create/find SIP channel for this INVITE It's registered with Broadvoice: Name/username Host Dyn

I'd be grateful if someone could point me in the right direction. I have a Broadvoice trunk attached to Asterisk which I use for frequent calls to the UK using the following in extensions.conf exten => _0[1-68].,1,Ringing exten => _0[1-68].,2,Dial(SIP/BV/01144${EXTEN:1}) exten => _0[1-68].,3,Hangup The caller hears immediate ringing, though it seems that Broadvoice

I just signed up and configured a SIP connection from BroadVoice. It works great. This issue I have is that it seems after a couple calls (or a certain amount of time) Asterisk doesn't seem to be receiving these calls anymore. It seems as if BroadVoice is not redirecting the call to my Asterisk. Asterisk still seems to be ready for the call: *CLI> sip show registry Host

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

Hi, i'm having problems with broadvoice incoming calls. I can perfectly place calls but my Asterisk Box is having problems when registering with the SIP Proxy. Sometimes it register and the call gets into asterisk, but without sound (seems to be NAT problems) and sometimes its not possible for asterisk to receive the calls. Everything was working great exactly for a month, but a week ago it

I have an idea, tell me if this wouldn't work... I know it's really ugly, but it might help some people until we can get round robin DNS checks for peers... Since * does not do GetHostByName() again until you reload your config, and BroadVoice and I'm sure other sip providers are using round robin DNS, why not create 2 [<your server here>-out] contexts in sip.conf, and then in

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

> > I've tried setting up my sip.conf in two ways: > > > ------------------------------------------------------ > register => [240xxxxxxx]:[my_password]@sip.broadvoice.com > > > [Broadvoice] > type=peer > username=[240xxxxxxx] > fromuser=[240xxxxxxx] > secret=[my_password] > host=sip.broadvoice.com > context=incoming >

I have just installed * from the latest CVS and I can make calls via X-Lite to outside numbers but for only 30 to 35 Seconds at a time then Broadvoice will hang up on me but X-Lite will not know it. Once I hang up X-Lite then I will get the following error message: Spawn extension (default, Number-I-Dialed, 1) exited non-zero on 'SIP/200-6a22' -- Got SIP response 404 "Not Found"

-------- Original Message -------- Subject: Re: [Asterisk-Users] BroadVoice configuration changes for Outbound Date: Sun, 06 Mar 2005 19:11:22 -0500 From: MF Hulber <mark@hulber.com> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com>, dan@mirrorlynx.com References: <200503060703.XAA12457@comand.net>

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

Okay, I installed http://www.xorcom.com/rapid/ Xorcom'ms Rapid distro. I had broadvoice working with the following settings described on the list and as well as broadvoices website. (http://www.broadvoice.com/support_install_asterisk.html) I'm trying to run another Distro (CentOS) and everything is installed and working fine with MySQL. However, the "same" configs give me the