similar to: ztdummy (again)

Hi, I'm cutting my teeth setting up a home asterisk server, but having some trouble getting Zaptel to recognize a X100P clone PCI (Motorola SM56 which should work according to various wiki's). What struck me was that the "/proc/interrupts" do not include IRQ 11 as the "lpcpi -v" is reporting. Am I missing something fundamental here? Any hint is greatly

Hi there I am currently using Asterisk with Meetme on a 2.4 linux kernel. I am using Ztdummy with usb-uhci driver for timing. It seems to work ok, although I haven't tried it with more than 5 users. However, I am now looking to move into a production environment and some people have said that it is better to have a Zaptel card. I would be installing Asterisk on a 2.6 linux kernel for the

I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff0000, remapped to f8a34000 TE410P version c01a010b, burst ON, slip

Hi I run asterisk 1.4.2 with zaptel 1.4.1. Zaptel is only needed for the ztdummy driver to get the Meetme() application to work. I don't have any specific hardware. And it does work nicely. When I reboot the machine however I have to manually load the driver like this: [root@vink ~]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device

Hi, I've managed to build the zaptel modules including ztdummy; ztdummy is installing fine in the modules list and the relevant device structures are present. lsmod | grep ztdummy gives:- ztdummy 5160 0 zaptel 186916 1 ztdummy rtc 12372 1 ztdummy Where I'm stuck is I am now at a loss as to how to configure my /etc/zaptel.conf and

Hi all, I hope everyone is doing well. I just joined the list, and I've really enjoyed all I have read about asterisk so far. Unfortunately, I'm having a bit of trouble implementing this thing :). By the way ... I did my best to search the forums, and also to use google extensively, and while I have found pages with people with the same problem, ... The fix suggested on those sites,

Hi, I have installed Asterisk 1.4.20 on Debian Etch. The server has no telephony card installed, but I have anyhow installed Zaptel (Zaptel-1.4.9) in order to be able to use MeetMe. The Zaptel modules load normally. I obtain the following prompts: kerplunk:/# /etc/init.d/zaptel start Loading zaptel framework: done. Waiting for zap to come online...OK Loading zaptel hardware modules: ztdummy.

Any thoughts on the following? I am running asterisk from CVS (downloaded yesterday's version, just to be sure) on a test system with no digium cards in it, so I have installed ztdummy (see logs and screenshots below) as a timing source. When I call the music on hold extension from a Sipura Sip connected analog phone, I hear nothing and start getting Warning[98310]: chan_sip.c:674

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

I have ztdummy installed: Module Size Used by ztdummy 3464 0 zaptel 218756 1 ztdummy crc_ccitt 2176 1 zaptel ohci_hcd 16388 0 floppy 49028 0 pcspkr 2180 0 piix 8580 0 [permanent] ehci_hcd 24456 0 uhci_hcd 26256 0 rtc

I installed Asterisk on Gentoo using emerge. At first, emerge tried installing version 0.9 but reading the wiki showed how to get the latest stable. I'm running Gentoo kernel 2.6.11-gentoo-r9. Asterisk seems to be working just fine, but I'm concerned that since I don't have any Digium hardware, I may need a timer source. When I executed emerge zaptel, it installed zaptel 1.0.7

Hi, I've install zaptel and I don't have a Digium card installed in the machine. So I want to install ztdummy to have Music On Hold working. I've follow these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and at the point "modprobe ztdummy" it's failing. I'm getting these messages: root@dubic:~# modprobe ztdummy FATAL: Error inserting ztdummy

Hi all, Trying to build ztdummy on an old redhat 7.3 box running kernel 2.4.20-43.7.legacysmp. Yes, I have the kernel sources installed. Yes, I set them up with make oldconfig; make dep. The build error is: make ztdummy gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/

Hi i followed this instructions for installing ztdummy on a 2.6 kernel (taken from http://www.voip-info.org/wiki/index.php?page=Asterisk+timer+ztdummy ) cd /usr/src/zaptel * READ /usr/src/zaptel/README.udev and follow the steps * check modules on: /etc/sysconfig/zaptel> if you have no digium hardware comment out all modeules except ztdummy. - make linux26 - make install -

//////////////////////////////////////////////////////////////////// Hello to all, I have a question. I am installing te110p, when I give ztcfg him - v leaves the following error to me ZT_CHANCONFIG failed on channel 25: No such device or address (6) - That means east error? - It is a physical damage of the card? Thank you very much

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

Hi! When I try to load the ztdummy driver via "insmod ztdummy", I get the following errors: /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_register I'm using zaptel-1.0.8 and

Hi, I am having problem with my Asterisk installation and find out it has to do with ztdummy. if the ztdummy module is loaded, the asterisk playback() command will not play files. DTMF is still properly received. If the ztdummy module is unloaded, sound playback works again. Here is my version zaptel-1.4.9.2 linux-source-2.6.18 asterisk-1.4.18 Can anyone tell me how to fix it? Or should I

hi there i am facing problem in installing the ztdummy module in fedora7, 2.6.22.5-76.fc7 is the version of the kernel. here are some logs for your kind consideration, i have tried varios solution from voip-info.org and many more, but in vain. Message from "/var/log/messages" Sep 13 14:27:14 localhost kernel: Zapata Telephony Interface Registered on major Sep 13 14:27:14 localhost